趙昌博講座教授|國立陽明交通大學

首頁 / 系所成員 / 趙昌博講座教授

趙昌博

講座教授

辦公室號碼：EE735
電話：Office: 31377; lab: 54301 , 54395 and (03)5737634
電子信箱：pchao@nycu.edu.tw
網站：https://sensors-ic.lab.nycu.edu.tw/#
授課領域：Paul C.-P. Chao received his B.S. in 1989 from Nat
實驗室：智慧感測實驗室（EE805）

研究專長

人工智慧感測與控制系統、大數據AI建模與預測、數位與類比電路與晶片實現、資安加解密數位晶片設計與實現、光電系統趨動及感測IC、下世代顯示系統、微發電系統及儲能IC、生醫光電影像感測技術及IC
自　　傳

Paul C.-P. Chao received his B.S. in 1989 from National Cheng-Kung University, Tainan, Taiwan. He received M.S. and Ph.D. degree from Michigan State University, USA, respectively, in 1993 and 1997. After graduation, he worked for the CAE department of Chrysler Corp in Auburn Hill, Detroit, USA for two years. He is currently a faculty member of the electrical and control engineering department at National Chiao Tung University, Taiwan. Prof. Chao was the recipient of the 1999 Arch T. Colwell Merit Best Paper Award from Society of Automotive Engineering, Detroit, USA; the 2004 Long-Wen Tsai Best Paper Award from National Society of Machine Theory and Mechanism, Taiwan; the 2005 Best Paper Award from National Society of Engineers, Taiwan; and the 2002/2003/2004 CYCU Innovative Research Award; 2006 the AUO Award; 2007 the Acer Long-Term 2nd-prize Award; The 2007/2008 NCTU EEC Outstanding Research Award. He serves as the Secretary, IEEE Taipei Section, 2009-2010. In recent years, his research interests focus on the analog circuit design for optical devices/systems; micro-mechatronics, control technology, micro- sensors and actuators
期刊論文
1. Shih-Song Cheng, Paul C.-P. Chao*, “An Ultra-High 6318 PPI Pixel Circuit for Micro OLED Displays with Vth Compensated up to 10-bit Gray Levels,” Dec 2023, IEEE Journal of Solid-State Circuits, accepted. (SCI Journal, Impact Factor = 6.126,Instruments & Instrumentation)., Dec. 2023
2. Shih-Song Cheng, Paul C.-P. Chao*, “A High 6318-PPI Pixel Circuit That Realizes 10-bit Gray Levels for Analog-PWM Driven Micro-LED Displays,” Dec 2023, IEEE Transations on Electron Devices, accepted. (SCI Journal, Impact Factor = 3.221, Electrical and Electronic Engineering), Dec. 2023
3. Shih-Song Cheng, Paul C.-P. Chao*, “A High 5292-PPI Pixel Circuit for Micro Displays with 10- bit Gray Levels Realized via the Technique of Analog Sub-Frame Integral,” 2023, IEEE Journal of the Electron Devices Society, vol. 11, pp. 456-466. (SCI Journal, Impact Factor = 2.523, Electrical and Electronic Engineering), Aug. 2023
4. Smriti Thakur, Paul C.-P. Chao* and Cheng-Han Tsai, “Precision Heart Rate Estimation Using a PPG Sensor Patch Equipped with New Algorithms of Pre-Quality Checking and Hankel Decomposition,” 2023, Sensors, vol. 23, Iss 13, pp. 6180. (SCI Journal, Impact Factor = 3.9, Instruments & Instrumentation), Jul. 2023
5. Shih-Song Cheng, Paul C.-P. Chao*, “A New SRAM-Embedded Pixel Circuit That Modulates Accurately Gray Level for PWM-Driven Micro-LED Displays,” 2023, IEEE Solid-State Circuits Letters, vol. 6, pp. 157-160. (SCI Journal, Impact Factor = 2.7, Instruments & Instrumentation), Jun. 2023
6. Shih-Song Cheng, Paul C.-P. Chao*, “A High 6318-PPI Pixel Circuit That Realizes 10-bit Gray Levels for Analog-PWM Driven Micro-LED Displays,” Dec 2023, IEEE Transations on Electron Devices, accepted. (SCI Journal, Impact Factor = 3.221, Electrical and Electronic Engineering), 2023
7. Jun-Lin Lin, Pao-Ying Zheng and Paul C.-P. Chao*, 2023, “A new ECC implemented by FPGA with favorable cd performance of speed and area for lombineightweight IoT edge devices,” Microsystem Technologies, published on line, January 2023. (SCI Journal, Impact Factor = 2.276, Physics, Applied), 2023
8. I-Feng Chang, Hao-Ren Chen and Paul C.-P. Chao*, 2023, “Design and Implementation for a High Efficiency Hardware Accelerator to Realize the Learning Machine for Predicting OLED Degradation,” Microsystem Technologies, published on line. (SCI Journal, Impact Factor = 2.276, Physics, Applied), 2023
9. Yi-Chang Lee, Jen-Yi Hsu and Paul C.-P. Chao*, 2023, “Design and Implementation of Machine Learning Models to Classify and Mitigate Muras of a Micro-LED Display,” Microsystem Technologies, published on line. (SCI Journal, Impact Factor = 2.276, Physics, Applied), 2023
10. Chun-Heng You, Shuen-Ming Tsai and Paul C.-P. Chao*, 2023, “A Synthesizable Clock Recovering Circuit from Clock Glitch Attack for Ring-Oscillator-Based TRNG,” Microsystem Technologies, published on line. (SCI Journal, Impact Factor = 2.276,Physics, Applied), 2023
11. Duc Huy Nguyen, Paul C.-P. Chao*, Chih-Chieh Chung, Ray-Hua Horng, Bhaskar Choubey, 2022, “Detecting Atrial Fibrillation in Real Time Based on PPG via Two CNNs for Quality Assessment and Detection,” IEEE Sensors Journal, vol. 22, no. 24, 1 pp. 24102-24111. (SCI Journal, Impact Factor = 4.61, Instruments & Instrumentation), 2022
12. W.-W. Yen, Paul C.-P. Chao*, 2022, “A ZVS Phase-Shift Full-Bridge Converter with Input Current Steering to Reduce EMI noise,” IEEE Transactions on Power Electronics, vol. 37, iss. 10, pp. 11937- 11950. (SCI Journal, Impact Factor = 6.153, Electrical and Electronic Engineering), 2022
13. Paul C.-P. Chao*, Shih-Song Cheng, Chiu-Hao Chen, and Kuei-Yu Lee, “A New IR-drop Model that Improves Effectively the Brightness Uniformity of an AMOLED Panel,” IEEE Journal of the Electron Devices Society, vol. 10, pp. 627-636. (SCI Journal, Impact Factor = 2.523, Electrical and Electronic Engineering), 2022
14. Duc Huy Nguyen, Paul C.-P. Chao*, Hong-Han Shuai, Yu-Wei Fang, and Bing Shi Lin, 2022, “Achieving High Accuracy in Predicting Blood Flow Volume at the Arteriovenous Fistulas of Hemodialysis Patients by Intelligent Quality Assessment on PPGs,” IEEE Sensors Journal, vol. 22, iss. 6, pp. 5844 - 5856. (SCI Journal, Impact Factor = 3.301, Instruments & Instrumentation), 2022
15. Tongjun Liu, Paul C.-P. Chao, Bhaskar Choubey, 2022, “Enhanced sensory identification in arrays of coupled resonant sensors,” IEEE Sensors Journal, vol. 22, Iss. 9, pp. 8557 - 8564. (SCI Journal, Impact Factor = 4.325, Instruments & Instrumentation)., 2022
16. Rajeev Kumar Pandey and Paul C.-P. Chao*, 2022, “A Dual-Channel PPG Readout System with Motion Tolerant Adaptability for OLED-OPD Sensors," IEEE Transactions on Biomedical Circuits and Systems, vol. 16, no. 1, pp. 36-51. (Invited Paper for the Special Issue of ISCAS 2021, SCI Journal, Impact Factor = 5.234, Eng., Electrical & Electronics), 2022
17. S. F. Lin, D. H. Nguyen, Paul C.-P. Chao*, H. R. Chen, 2022, “Prediction of OLED Temperature Distribution Based on Neural Network,” Microsystem Technologies, vol. 28, pp. 2215–2224. (SCI Journal, Impact Factor = 2.276, Physics, Applied), 2022
18. Phan Tan-Phat, Paul C.-P. Chao*, Huang Zih-We, 2022, “Design and implementation of a new torque controller via FPGA for 6-DOF articulated robots,” Microsystem Technologies, vol. 28, pp. 2259–2276. (SCI Journal, Impact Factor = 2.276, Physics, Applied), 2022
19. Rajeev Kumar Pandey and Paul C.-P. Chao*, 2022, “Design and development of a photoplethysmography based microsystem for mental stress estimation,” Microsystem Technologies, vol. 28, pp. 2277–2296. (SCI Journal, Impact Factor = 2.276, Physics, Applied), 2022
20. Rajeev Kumar Pandey, Eka Fitrah Pribadi and Paul C.-P. Chao*, 2022, “Technology scaling impact on VLSI interconnect and low swing signaling technique,” Microsystem Technologies, vol. 28, pp. 2337–2351. (SCI Journal, Impact Factor = 2.276, Physics, Applied), 2022
21. Eka Fitrah Pribadi, Rajeev Kumar Pandey and Paul C.-P. Chao*, 2022, “A New Delta-Sigma Analog to Digital Converter with High-Resolution and Low Offset for Detecting Photoplethysmography Signal,” Microsystem Technologies, vol. 28, pp. 2369–2379. (SCI Journal, Impact Factor = 2.276, Physics, Applied), 2022
22. C. K. Tasu, D. H. Nguyen, Bhaskar Choubey and Paul C.-P. Chao*, 2022, “High-performance infrared image processing with gray-scale dynamic range correction implemented by FPGA,” Microsystem Technologies, vol. 28, pp. 2235–2248.. (SCI Journal, Impact Factor = 2.276, Physics, Applied), 2022
23. S. F. Lin, Paul C.-P. Chao*, 2022, “Prediction of OLED Temperature Distribution Based on Neural Network,” Microsystem Technologies, published on line. (SCI Journal, Impact Factor = 2.276, Physics, Applied), 2022
24. Wan-Yu Wu, Yu-Hsuan Hsu, Yi-Fan Chen, Yuh-Renn Wu, Han-Wen Liu, Tse-Yi Tu, Paul P.-C. Chao, Chih-Shan Tan, and Ray-Hua Horng, 2021,"Wearable Devices Made of a Wireless Vertical- Type Light-Emitting Diode Package on a Flexible Polyimide Substrate with a Conductive Layer,” ACS Applied Electronic Materials, vol. 3, iss. 2, 979-987, DOI: 10.1021/acsaelm.0c0107., 2021
25. 20. Paul C.-P. Chao*, Chih-Cheng Wu, Duc Huy Nguyen, Ba-Sy Nguyen, Pin-Chia Huang and Van- Hung Le, 2021, “The Machine Learnings Leading the Cuffless PPG Blood Pressure Sensors into the Next Stage,” IEEE Sensors Journal, vol. 21, iss. 11, pp. 12498-12510. (SCI Journal, Impact Factor = 3.076, Instruments & Instrumentation)., 2021
26. Duc Huy Nguyen, Yu-Ting Chen, Tse-Yi Tu, Paul C.-P. Chao*, Yu-Wei Fang, Bing-Shi Lin, 2021, “A new blood flow volume sensor with embedded estimation of SpO2 to maximize its accuracy," Microsystem Technologies, vol. 27, iss. 6, pp. 2433-2445. (SCI Journal, Impact Factor = 1.581, Engineering, Electrical & Electronic), 2021
27. Ba-Sy Nguyen and Paul C.-P. Chao*, 2021, “A switch module stacked by a 4 × 3 IGBT array with balanced voltage sharing for PEF applications," Microsystem Technologies, vol. 27, iss. 6, pp. 2407- 2418. (SCI Journal, Impact Factor = 1.581, Engineering, Electrical & Electronic), 2021
28. C. P. Chang, W.-W. Yen, and Paul C.-P. Chao*, Yu-Wei Fang, Bing-Shi Lin, 2021, “Design and simulation of a new wireless power transfer circuit with a single-stage regulating rectifier for flexible sensor patches," Microsystem Technologies, vol. 27, iss. 6, pp. 2303–2314. (SCI Journal, Impact Factor = 1.581, Engineering, Electrical & Electronic), 2021
29. Rajeev Kumar Pandey, Tse-Yu Lin, and Paul C.-P. Chao*, 2021, “Design and implementation of a photoplethysmography acquisition system with an optimized artificial neural network for accurate blood pressure measurement," Microsystem Technologies, vol. 27, iss. 6, pp. 2345-2367. (SCI Journal, Impact Factor = 1.581, Engineering, Electrical & Electronic), 2021
30. Eka Fitrah Pribadi, Rajeev Kumar Pandey and Paul C.-P. Chao*, 2021, “Design and implementation of a new light to digital converter for the PPG sensor," Microsystem Technologies, vol. 27, iss. 6, pp. 2461-2472. (SCI Journal, Impact Factor = 1.581,Engineering, Electrical & Electronic), 2021
31. Ba-Sy Nguyen, Wen-Wei Yen, Paul C.-P. Chao*, and Sheng-Ching Wang, Aug 2020, “A New High- Efficiency Power Management Circuit for a Novel Two-Phase Compensated Pulse Alternator,” IEEE Transactions on Plasma Science, vol. 48, Iss. 9, pp. 3176-3187. (SCI Journal, Impact Factor = 1.56,Physics, Fluids & Plasma), 2020
32. Hong-Yu Chiu, Austin Shuai and Paul C.-P. Chao, June 2020, “Reconstructing QRS Complex from PPG by Transformed Attentional Neural Networks,” IEEE Sensors Journal, vol. 20, Iss. 20, pp. 12374-12383. (SCI Journal, Impact Factor = 3.076,Instruments & Instrumentation)., 2020
33. W.-W. Yen, and Paul C-P. Chao*, “Backpack energy harvester managed by a modified fly-back converter," Microsystem Technologies, vol. 55, pp. 1-11. (SCI Journal, Impact Factor = 1.581,Engineering, Electrical & Electronic), 2020
34. Pandey, Rajeev Kumar, and Paul C-P. Chao*, “External temperature sensor assisted a new low power photoplethysmography readout system for accurate measurement of the bio-signs," Microsystem Technologies, vol. 160, pp. 1-29. (SCI Journal, Impact Factor = 1.581,Engineering, Electrical & Electronic), 2020
35. Rajeev Kumar Pandey, Tzu Hao Huang, Wei-Hsuan Ho, Eka Fitrah Pribadi and Paul C.-P. Chao*, 2020, “Achieving Sensing Precision Of 0.5nA In Pixel with 7us Settling Time by a New External Current Sensing Circuit for AMOLED Displays,” Microsystem Technologies, vol. 26, pp. 3349– 3369. (SCI Journal, Impact Factor = 1.581,Engineering, Electrical & Electronic), 2020
36. Yi-Feng Chang and Paul C.-P. Chao*, 2020,“Design and implementation of a new high-accuracy interpolation encoder IC for magneto-resistive sensors,” Microsystem Technologies, vol. 26, pp. 3349–3369. (SCI Journal, Impact Factor = 1.581,Engineering, Electrical & Electronic), 2020
37. Jeremy H.-S. Wang, Ming-Hua Yeh, Paul C.-P. Chao*, Tse-Yi Tu, Yuan-Hwa Kao, Rajeev Pandey, 2020,“A Fast-Sensing Readout Circuit Enabled by Code Division Multiple Access Implemented for an Ultra-Thin On-Cell Flexible Capacitive Touch Panel,” Microsystem Technologies, vol. 26, pp. 3517–3531. (SCI Journal, Impact Factor = 1.581,Engineering, Electrical & Electronic), 2020
38. Chia Yu Chang, Paul C.-P. Chao*, 2020,“A Fast-Sensing Readout Circuit Enabled by Code Division Multiple Access Implemented for an Ultra-Thin On-Cell Flexible Capacitive Touch Panel,” Microsystem Technologies, vol. 26, pp. 3517–3531. (SCI Journal, Impact Factor = 1.581,Engineering, Electrical & Electronic), 2020
39. Eka Fitrah Pribadi, Paul C.-P. Chao*, 2020, “Optimizing a novel PPG sensor patch via optical simulations towards accurate heart rates,” Microsystem Technologies, vol. 26, pp. 3409–3420. (SCI Journal, Impact Factor = 1.581,Engineering, Electrical & Electronic), 2020
40. Tse-Yi Tu and Paul C.-P. Chao*, 2019, “Optimal Design of a New Strain-type Sensor for Cuff-less Blood Pressure Measurement via Finite Element Modeling and Taguchi Method,” IEEE Sensors Journal, vol. 19, Iss. 22, pp. 10355-10364. (SCI Journal, Impact Factor = 2.617,Instruments & Instrumentation), 2019
41. Pei-Yu Chiang, Paul C.-P. Chao*, Tse-Yi Tu, Yung-Hua Kao, Chih-Yu Yang, Der-Cherng Tarng and Chin-Long Wey, 2019, “ Machine Learning Classification for Assessing the Degree of Stenosis and Blood Flow Volume at Arteriovenous Fistulas of Hemodialysis Patients Using a New Photoplethysmography Sensor Device,” MDPI Sensors, vol. 19, pp. 3422. (SCI Journal, Impact Factor = 3.014,Optics, Ranking = 16/61 (0.262), Instrument and Instrumentation), 2019
42. Ming-Cheng Liu, Eka Fitrah Pribadi, Paul C.-P. Chao*, Rajeev Kumar Pandey, 2019, “ A low-power reference-less clock/data recovery for visible light communication devices requiring low data throughput,” Microsystem Technologies, vol. 26, iss. 1, pp. 171–181, January 2020. (SCI Journal, Impact Factor = 1.581, Engineering, Electrical & Electronic), 2019
43. Ching-Cheng Yang, Rajeev Pandey, Tse-Yi Tu, Yuan-Po Cheng, Paul C.-P. Chao*, 2019, “ An efficient energy harvesting circuit for batteryless IoT devices,” Microsystem Technologies, vol. 26, iss. 1, pp. 195–207, January 2020.. (SCI Journal, Impact Factor = 1.581, Engineering, Electrical & Electronic), 2019
44. Yung-Hua Kao, Paul C.-P. Chao* and Chin-Long Wey, 2019, “ Design and Validation of a New PPG Module to Acquire High-Quality Physiological Signals for High-Accuracy Biomedical Sensing,” IEEE Journal of Selected Topics in Quantum Electronics, vol. 25, no. 1, pp. 69000210. (SCI Journal, Impact Factor = 3.367, Engineering, Electrical & Electronic), 2019
45. Yung-Hua Kao, Paul C.-P. Chao* and Chin-Long Wey, 2018, “ Towards maximizing the sensing accuracy of an cuffless, optical blood pressure sensor using a high-order front-end filter,” Microsystem Technologies, vol. 24, iss. 11, pp. 4621–4630. (SCI Journal, Impact Factor = 1.581, Engineering, Electrical & Electronic), 2018
46. Paul C.-P. Chao*, Pei-Yu Chiang, Yung-Hua Kao, Tse-Yi Tu, Chih-Yu Yang, Der-Cherng Tarng, Chin-Long Wey, 2018, “ A Portable, Wireless Photoplethysomography (PPG) Sensor for Detecting Arteriovenous Fistula (AVF) Dysfunction Using Support Vector Machine,” MDPI Sensors, Vol. 18, Iss. 11, pp. 3854. (SCI Journal, Impact Factor = 3.014,Optics, Ranking = 16/61 (0.262), Instrument and Instrumentation), 2018
47. Trong-Hieu Tran, Yu-Jen Wang, Chun-Kai Cheng, Paul C.-P. Chao*, Chun-Chieh Wang, 2018,“Using maximum likelihood to calibrate a six-DOF force/torque sensor,” Microsystem Technologies, vol. 24, iss. 11, pp. 4493-4509. (SCI Journal, Impact Factor = 1.581, Engineering, Electrical & Electronic), 2018
48. Ming-Hung Yu and Paul C.-P. Chao*, 2018, “A new multi-mode multi-input–multi-output (MIMO) converter in an efficient low-voltage energy harvesting system for a gas sensor,” International Journal of Engineering Development and Research, vol. 6, iss. 3, pp. 352–358. (ISSN: 2321-9939), 2018
49. Chun-Kai Cheng and Paul C.-P. Chao*, 2018, “Chaotic Synchronizing Systems with Zero Time Delay and Free Couple via Iterative Learning Control,” Applied Science, vol. 8, pp. 177, Jan, 2018. (SCI Journal, Impact Factor = 1.913, Multi-disciplinary), 2018
50. Tse-Yi Tu and Paul C.-P. Chao*, 2018,“Continuous Blood Pressure Measurement Based on a Neural Network Scheme Applied with a Cuffless Device,” Microsystem Technologies, vol. 24, iss. 11, pp. 4539-4549. (SCI Journal, Impact Factor = 1.581,Engineering, Electrical & Electronic), 2018
51. Pei-Yu Chiang and Paul C.-P. Chao*, 2018, “Theoretical Developments and Clinical Experiments of Measuring Blood Flow Volume (BFV) at Arteriovenous Fistula (AVF) Using a Photoplethysmography (PPG) Sensor,” Microsystem Technologies, vol. 24, iss. 11, pp. 4587–4603. (SCI Journal, Impact Factor = 1.581,Engineering, Electrical & Electronic), 2018
52. Paul C.-P. Chao*, Yu-Te Liao, Yu-Jen Wang, 2018, “The ISPS 2017 editorial for the 26th annual conference on information storage and processing systems, San Francisco, California, USA” Microsystem Technologies, vol. 24, iss. 11, pp. 4437. (SCI Journal, Impact Factor = 1.581,Engineering, Electrical & Electronic), 2018
53. Tsung-Yen Ku, Paul C.-P. Chao*, Chin-Hai Huang, En-Chih Liu, Ming-Hua Yeh, Tong-Wen Wang, 2018, “Design and validation of the readout circuitry for an in-cell active-matrix capacitive (IAMC) touch panel,” Microsystem Technologies, vol. 24, iss. 11, pp. 4551-4559. (SCI Journal, Impact Factor = 1.581, Engineering, Electrical & Electronic), 2018
54. Eric P.-Y. Chiang, Paul C.-P. Chao*, Der-Cherng Tarng, Chih-Yu Yang, 2017, “ A Novel Wireless Photoplethysmography Blood Flow Volume Sensor for Assessing Arteriovenous Fistula of Hemodialysis Patients,” IEEE Transactions on Industrial Electronics, vol. 64, iss. 12, pp. 9626- 9635, 2017. (SCI Journal, Impact Factor = 6.383,Automation and Control system, MOST 104-2923-M-009-002-, 105-2623-E-009-009-D and 105-2633-B-009-003), 2017
55. Huai-San Wang, Kang-Fu Qiu and Paul C.-P. Chao*, 2017,“ “Control design and digital implementation of a fast 2 degree-of-freedom (2-DOF) translational optical image stabilizer (OIS) for image sensors in mobile camera phones,” Sensors, vol. 17, iss. 10, pp. 2333. (SCI Journal, Impact Factor = 2.437, Instruments & Instrumentation, MOST 105-2923- M-009-006, 105-2634-F-009-002, 106-2221-E-009-089 and 106-2218-E-009-011, 105-2633-B- 009-003), 2017
56. Trong-Hieu Tran, Hsuan-Wen Peng, Paul C.-P. Chao*, Jing-Wen Hsieh, 2017,“ “A Low-ppm Digitally Controlled Crystal Oscillator Compensated by a New 0.19 mm2 Time-Domain Temperature Sensor,” IEEE Sensors Journal, vol. 17, iss. 1, pp. 51 - 62. (SCI Journal, Impact Factor = 2.512, Instruments & Instrumentation, MOST 104-2923-M-009- 002-, 105-2623-E-009-009-D and 105-2633-B-009-003), 2017
57. Kuo-Yu Chou, Paul C.-P. Chao*, Chuan-Xin Chen, Chang-Xian Wu, 2017,“ “Modeling and Analysis of Touch on Flexible Ultra-Thin Touch Panels for AMOLED Displays Employing Finite Element Method,” Microsystem Technologies, published on line on 11 January 2017. (SCI Journal, Impact Factor = 1.195,Engineering, Electrical & Electronic), 2017
58. Trong-Hieu Tran, Paul C.-P. Chao*, Ping-Chieh Chien, 2016,“ “A New Front End Readout for a High Resolution Magnetic Sensor,” Sensors, vol. 16, iss. 9, pp. 1416 - 1428. (SCI Journal, Impact Factor = 2.437, Instruments & Instrumentation, MOST 104-2923-M-009- 002-, 105-2623-E-009-009-D and 105-2633-B-009-003), 2016
59. Shih-Song Cheng, Sheng-Chieh Huang, Trong Hieu Tran, Kai-Yu Shao, Paul C.-P. Chao*, Pei-Yu Chiang, 2016,“ “A 1.5 mW front-end readout circuit for a small-sized melanin sensor,” Microsystem Technologies, vol. 22, iss. 12, pp. 1449-1465. (SCI Journal, Impact Factor = 0.969, Engineering, Electrical & Electronic), 2016
60. Yung-Hua Kao, Tse-Yi Tu, Paul C.-P. Chao*, Yung-Pin Lee, Chin-Long We, 2016, “"Optimizing a new cuffless blood pressure sensor via a solid–fluid‑electric finite element model with consideration of varied mis‑positionings,” Microsystem Technologies, vol. 22, iss. 6, pp. 1437-1447. (SCI Journal, Impact Factor = 0.969, Engineering, Electrical & Electronic), 2016
61. Paul C.-P. Chao*, Chun-Kai Chang, Chun-Kai Cheng, Trong-Hieu Tran, Thilo Sauter, 2016,“"A new single inductor bipolar multi‑output (SIBMO) DC–DC converter driven by constant on‑time with improved performance," Microsystem Technologies, vol. 22, iss. 12, pp. 1405-1418. (SCI Journal, Impact Factor = 0.969, Engineering, Electrical & Electronic), 2016
62. Yung-Hua Kao, Tse-Yi Tu, Paul C.-P. Chao*, Yung-Pin Lee, Chin-Long We, 2016,“"A 1.5 mW front-end readout circuit for a small-sized melanin sensor,” Microsystem Technologies, vol. 22, iss. 12, pp. 1449-1465. (SCI Journal, Impact Factor = 0.969,Engineering, Electrical & Electronic), 2016
63. Wei-Yi Chuang, Paul C.-P. Chao* and Kuu-Young Young, 2015,“"Optimizing an On-Chip Boost DC- DC Converter with an On-chip or On-board Inductance",Microsystem Technologies, vol. 21, iss. 12, pp. 2727-2735. (SCI Journal, Impact Factor = 0.969,Instruments & Instrumentation), 2015
64. Paul C.-P. Chao*, Ching-Hua Kuan, and Jia-Wei Su, 2015,“"Optimizing an On-Chip Boost DC- DC Converter with an On-chip or On-board Inductance",Microsystem Technologies, vol. 21, iss. 12, pp. 2727-2735. (SCI Journal, Impact Factor = 0.969, Best Paper Award of the ASME ISPS 2014 Conference), 2015
65. Paul C.-P. Chao*, Li-Chi Hsu, Yu-Feng Li and Chin-Wei Chun, 2015 “"Design and development of a wireless fall detection module for homecare," Microsystem Technologies, vol. 21, iss. 12, pp. 2737-2745. (SCI Journal, Impact Factor = 0.969, Engineering, Electrical & Electronic), 2015
66. Paul C.-P. Chao*, Yen-Ping Hsu, Yung-Hua Kao and Kuei-Yu Lee, 2015, “"A New Prediction Model on the Luminance of OLEDs Subjected to Different Reverse Biases for Alleviating Degradation in AMOLED Displays." Microsystem Technologies, vol. 21, iss. 12, pp. 2771-2776. (SCI Journal, Impact Factor = 0.969, Best Paper Award of the ASME ISPS 2014 Conference), 2015
67. Kuei-Yu Lee, Yen-Ping Hsu, Paul C.-P. Chao* and Wei-Dar Chen, 2014,“A New Compensation Method for Emission Degradation in an AMOLED Display via an External Algorithm, New Pixel Circuit, and Models of Prior Measurements,” IEEE/OSA Journal of Display Technology, vol. 10, no. 3, pp. 189-197. (SCI Journal, Impact Factor = 1.891,NSC-101-2911- I-009-101), 2014
68. Sheng-Chien Huang, Wei-Hsuan Hsu, Paul C.-P. Chao* and C. H. Tsai, 2014,“A New Active 3D Optical Proximity Sensor Array and Its Readout Circuit,” IEEE Sensors Journal, vol. 14, no. 7, pp. 2185-2192. (SCI Journal, Impact Factor = 1.932, NSC-101-2623-E-009-006-D, NSC-101- 2911-I-009-101), 2014
69. Lehmhus, D., Bosse, S., Lang, W., Paul C.-P. Chao and Chang, F., 2014,“Material-integrated sensing,” IEEE Sensors Journal, vol. 14, no. 7, pp. 2077. (SCI Journal, Impact Factor = 1.932,Instruments & Instrumentation), 2014
70. Yi-Hung Liu, Chung-Hao Chen, and Paul C.-P. Chao,“Mathematical Methods Applied to Digital Image Processing,” Mathematical Problems in Engineering, vol. 2014, pp. 1-4. (SCI Journal, Impact Factor = 1.082,Engineering, Multidisciplinary), 2014
71. Paul C.-P. Chao*, W. D. Chen and R. H. Wu, 2014,“A Battery Charger Controller for a Flyback Converter with Digital Primary Side Regulation,” Microsystem Technologies, vol. 20, pp. 1689- 1703. (SCI Journal, Impact Factor = 0.969,NSC-101-2221-E-009-165 and NSC-101- 2911-I-009-101), 2014
72. Paul C.-P. Chao*,Tse-Yi Tu, and Yung-Yuan Kao, 2014,“An LCL-Lens Array with Electrodes of Interlaced Structure in Applications of Auto-Stereoscopic Displays,” Microsystem Technologies, vol. 20, pp. 1425-1434. (SCI Journal, Impact Factor = 0.969, NSC-99-2622-E-009-017-CC1, NSC-99-2220-E-009-005- and NSC-101-2911-I-009-101), 2014
73. Wei-Hsuan Hsu, Paul C.-P. Chao*, W. D. Chen and C. H. Tsai, 2014, “An On-line Digital Optical Bench Tester Based for Lens Quality Evaluation,” Microsystem Technologies, vol. 20, pp. 1387- 1395. (SCI Journal, Impact Factor = 0.969. NSC-101-2911-I-009-101-), 2014
74. Paul C.-P. Chao*, Jian-Ruei Chen, C. H. Tsai, and W. D. Chen, 2014.“Design and Realization of High Resolution (640x480) SWIR Image Acquisition,” Microsystem Technologies, vol. 20, pp. 1583-1595. (SCI Journal, Impact Factor = 0.969. NSC-100-2623-E-009-006-D and NSC-101-2911-I-009-101), 2014
75. Wei-Yi Chuang, Paul C.-P. Chao*, and Kuu-Young Young, 2014, “Computerized Stimulation
76. Parameter Adjustment that Avoids Side Effects and Minimizes Power Consumption for Deep
77. Brain Stimulation in Parkinson's Disease,” Journal of Biomedical Engineering, in press. (SCI
78. Journal, Impact Factor =1.405, NSC 95-2745-E-033-004-URD), 2014
79. Paul C.-P. Chao*, W. D. Chen and C. W. Cheng, 2013, “An Intelligent Battery Fast Charging mechanism in a Generic photovoltaic system with On-line Temperature Compensation,”
80. Microsystem Technologies, in press. (SCI Journal, Impact Factor =0.931, NSC
81. 97-2220-E-009-029), Nov. 2013
82. Tse-Yi Tu, Paul C.-P. Chao*, and Yueh-Teng Mai, 2013, “A Low-Power Low-Voltage Preamplifier for Capacitor-Type Condenser Microphone,” Microsystem Technologies, in press. (SCI Journal, Impact Factor =0.931, NSC 97-2220-E-009-029), Nov. 2013
83. Paul C.-P. Chao*, Chun-Yin Tsai, and Chi-Wei Chiu, 2013, “Hybrid fabrication processes for a high sensitivity MEMS microphone,” Microsystem Technologies, in press. (SCI Journal, Impact Factor =0.931, NSC 97-2220-E-009-029), Nov. 2013
84. Paul C.-P. Chao*, C.-H. Tsai, J.-D. Li and C.-Y. Shen, 2013, “Optimizing Angular Placements of the LEDs in a LCD Backlight Module for Maximizing Optical Efficiency,” Microsystem Technologies, in press. (SCI Journal, Impact Factor =0.931, NSC 97-2220-E-009-029), Nov. 2013
85. Kuei-Yu Lee and Paul C.-P. Chao*, 2011, “A New AMOLED Pixel Circuit with Pulsed Drive and Reverse Bias to Alleviate OLED Degradation Energy Harvesting Electronics for Vibratory Devices in Self-Powered Sensors,” IEEE Transaction on Electron Device, recommended for publication. (Impact Factor = 2.719, NSC 99-2911-I-010-101), Jun. 2013
86. Paul C.-P. Chao*, 2011, “Energy Harvesting Electronics for Vibratory Devices in Self-Powered Sensors,” IEEE Sensors Journal, Vol. 11, No. 12, pp. 3106-3121. (Invited Paper for celebrating 10-year anniversary issue of IEEE Sensors Journal, SCI Journal, Impact Factor =1.587, NSC 97-2221-E-007-050, NSC 99-2911-I-010-101), Jun. 2013
87. Kuei-Yu Lee, Yen-Ping Hsu and Paul C.-P. Chao*, 2012, “A New 4T0.5C AMOLED Pixel Circuit with Reverse Bias to Alleviate OLED Degradation,” IEEE Electron Device Letters, Vol. 33, No. 7, pp. 1024-1026. (SCI Journal, Impact Factor = 3.023,cited by 4 times, Engineering, Electrical & Electronic, NSC-100- 2911-I-009-101), Oct. 2012
88. Kuei-Yu Lee, and Paul C.-P. Chao*, 2012, “A New AMOLED Pixel Circuit with Pulsed Drive and Reverse Bias to Alleviate OLED Degradation,” IEEE Transaction on Electron Device, Vol. 59, No. 4, pp. 1123-1130. (SCI Journal, Impact Factor = 3.023, cited by 7 times, Engineering, Electrical & Electronic, NSC-100- 2911-I-009-101), Oct. 2012
89. Paul C.-P Chao*, Yung-Yuan Kao and Chao-Jui Hsu, 2012, “A New Negative Liquid Crystal Lens with Multiple Ring Electrodes in Unequal Width,” IEEE Photonics Journal, Vol. 4, No. 1, pp. 250- 266. (SCI Journal, Impact Factor = 2.353, cited by 2 times, Engineering, Electrical & Electronic, NSC-100-2911-I-009-101 and NSC-100-2221-I-009-091), Oct. 2012
90. Paul C.-P. Chao* and Chien-Yu Shen, 2009, “Sensorless Tilt Compensation for a Three-axis Optical Pickup Using a Sliding-mode Controller Equipped with a Sliding-mode Observer,” IEEE Transactions on Control System Technology, Vol. 17, Issue 2, pp. 267-282. (SCI Journal, Impact Factor =1.211, NSC 96-2221-E-009-069 and NSC 96-2622-E-009-010-CC3), Aug. 2011
91. Chun-Yin Tsai, Chi-Wei Chiu and Paul C.-P. Chao*, 2009, “Reliable hybrid fabrication processes for high sensitivity MEMS microphone,” Microelectronic Engineering, accepted for publication. (SCI Journal, Impact Factor =1.503, NSC96-2220-E-009-029 and 96-2622-E-009-010-CC3), Aug. 2011
92. Lun-De Liao, Paul C.-P. Chao*, Yu-Jhu Lin, Chi-Wei Chiu, Shaou-Gang Miaou, Ming Chang and Jeng-Sheng Huang, 2009, “Precision Micro-/Nano-machining in a Scanning Electron Microscope by Run-to-Run Control Based on Image Feedbacks,” Microelectronic Engineering, Vol. 86, Issue 4-6, pp. 1162-1168, 2009. (SCI Journal, Impact Factor =1.503, NSC96-2220-E-009-029 and NSC95-2745-E-033-004-URD), Aug. 2011
93. Lun-De Liao, Paul C.-P. Chao*, Yu-Jhu Lin, Chi-Wei Chiu, Shaou-Gang Miaou, Ming Chang and Jeng-Sheng Huang, 2009, “Precision Micro-/Nano-machining in a Scanning Electron Microscope by Run-to-Run Control Based on Image Feedbacks,” Microelectronic Engineering, Vol. 86, Issue 4-6, pp. 1162-1168, 2009. (SCI Journal, Impact Factor =1.503, NSC96-2220-E-009-029 and NSC95-2745-E-033-004-URD), Aug. 2011
94. Tse-Yi Tu , Paul C.-P. Chao*, Chi-Wei Chiu, Chun-Chieh Wang, and Jeng-Sheng Huang, 2009, “Fuzzy Control Design of a Magnetically-Actuated Optical Image Stabilizer with Hystersis Compensation,” Journal of Applied Physics, Vol. 105, Issue 7, pp. 07F124-1-07F124-3. (SCI Journal, Impact Factor =2.171, 17/94, Physics, Applied, NSC 96-2220-E-009-029)., Aug. 2011
95. Paul C.-P. Chao*, Chi-Wei Chiu, J.-S. Huang and Chien-Ming Chen, 2009, “Design and Construction of an In-situ Inspection Machine for Ensuring the Dynamic Performance of Fluid Bearings in Data Storage Devices,” Microsystem Technologies, Vol. 15, No. 1-2, pp. 1547-1556. (SCI Journal, Impact Factor =1.036, 95-2745-E-033-004-URD), Aug. 2011
96. Yung-Yuan Kao, Paul C.-P. Chao*, Zong-Bin Liu, Zhi-Kuan Wang, Po-Wen Liu, Jeng-Sheng Huang, and Chang-Chun Chang, 2009, “Performance Prediction of a Small-sized Herringbone-grooved Bearing with Ferro-fluid Lubrication Considering Cavitation,” Journal of Applied Physics, Vol. 105, Issue 7, pp. 07A334-1-07A334-3. (SCI Journal, Impact Factor =2.171, 17/94, Physics, Applied, NSC 96-2220-E-009-029)., Aug. 2011
97. Andy Ying-Guey Fuh, Cheng-Kai Liu, Ko-Ting Cheng*, Chi-Lung Ting, Che-Chang Chen, Paul C.-P. Chao, and Hsu-Kuan Hsu, 2009, “Variable liquid crystal pre-tilt angles generated by photoalignment in homeotropically aligned azo dye-doped liquid crystals,” Applied Physics Letters, Vol. 45, 161104. (SCI Journal, Impact Factor =3.709, Ranking 2/64, Optics, NSC 97-2220-E-009-029)., Aug. 2011
98. Lun-De Liao, Paul C.-P. Chao*, Jian-Ting Chen, Wei-Dar Chen, Wei-Hsuan Hsu, Chi-Wei Chiu, and Chin-Teng Li, 2009, “A Miniaturized Electromagnetic Generator with Planar Coils and Its Energy Harvest Circuit,” IEEE Transactions on Magnetics, Vol. 45, No. 10, pp. 4621-4627, an honored invited paper. (SCI Journal, Impact Factor =1.014, NSC97-2221-E-009-057-MY3 and NSC97-2220-E-009-029)., Aug. 2011
99. Lun-De Liao, Paul C.-P. Chao*, Ming-Hsun Chung and Jeng-Sheng Huang, 2010, “Robust Dual-Stage and Repetitive Control Designs for an Optical Pickup with Parallel Cantilever Beams Powered by Piezo-Actuation,” Microsystem Technologies, Vol. 16, No. 1, pp. 317-331. (SCI Journal, Impact Factor=1.036, NSC 96-2200-E-009-029 and NSC 97-2221-E-009-057-MY3)., Aug. 2011
100. Paul C.-P. Chao*, C.-W. Chiu, J.-Y. Shen, 2010, “Precision Positioning of a Three-axis Optical Pickup via a Double Phase-Lead Compensator Equipped with Auto-tuned Parameters,” Microsystem Technologies, Vol. 16, No. 1, pp. 117-141. (SCI Journal, Impact Factor =1.036, NSC 96-2622-E-009-010-CC3 and NSC 97-2221-E-009-057-MY3)., Aug. 2011
101. Lun-De Liao, Paul C.-P. Chao*, Chi-Wei Chiu, Chih-Wei Huang, 2010, “DC dynamic and static pull-in predictions and analysis for electrostatically actuated clamped circular micro-plates based on a continuous model,” Journal of Micromechanics and Micro-engineering, Vol. 20, pp. 025013. (SCI Journal, Impact Factor =1.930, Ranking 10/112, Mechanics, NSC 97-2221-E-009-057-MY3 and NSC 97-2220-E-009-029)., Aug. 2011
102. Che-Hung Tsai, Lun-De Liao, Paul C.-P. Chao*, In-Chen Chen, Hsin-Fei Meng, Wei-Dar Chen, Shir-Kuan Lin and Chin-Teng Lin, 2010, “Optimal Design and Fabrication of ITO/Organic Photonic Crystals in Polymer Light Emitting Diodes using a Focused Ion Beam,” Microelectronic Engineering, Vol. 87. Issue 5-8, pp. 1331-1335. (SCI Journal, Impact Factor =1.503, NSC 97-2221-E-009-057-MY3 and NSC 97-2220-E-009-029)., Aug. 2011
103. L. D. Liao, M. L. Li, H. Y. Lai, Y. Y. Shih, Y. C. Lo, S. Tsang, Paul C.-P. Chao, C. T. Lin, F. S. Jaw, Y. Y. Chen*, 2010, “Imaging Brain Hemodynamic Changes during Rat Forepaw Electrical Stimulation Using Functional Photoacoustic Microscopy,” NeuroImage, Vol. 52, No. 2, pp. 562-570. (SCI Journal, Impact Factor =5.739, NSC 96-2220-E-009-029, NSC97-2220-E-009-029, and NSC 97-2221-E-007-084-MY3)., Aug. 2011
104. Wei-Yi Chuang, Paul C.-P. Chao*, and Kuu-Young Young, 2010, “Adjusting Electrode Potentials to Compensate Thermal/Tissue Effects in Deep Brain Stimulation via Finite Element Electromagnetic Analysis,” IEEE Transactions on Magnetics, Vol. 46, No. 6, pp.2397-400. (SCI Journal, Impact Factor =1.014, NSC 95-2745-E-033-004-URD)., Aug. 2011
105. Yung-Yuan Kao, Paul C.-P. Chao* and Chieh-Wen Hsueh, 2010, “A New Low-Voltage-Driven GRIN Liquid Crystal Lens with Multiple Ring Electrodes in Unequal Width,” Optics Express, Vol. 18, No. 18, pp. 18506–18518. (SCI Journal, Impact Factor =3.709, Ranking 2/64, Optics, NSC 98-2220-E-009-018 and 97-2221-E-009-057-MY3)., Aug. 2011
106. Paul C.-P. Chao*, Yu-Han Chen, Chi-Wei Chiu, Meng-Yen Tsai, Jyh-Yeong Chang and Shir-Kuan Lin, 2011, “A New Two-DOF Rotational Optical Image Stabilizer,” Microsystem Technologies, accepted. (SCI Journal, Impact Factor =1.036, NSC 97-2220-E-009-029), Aug. 2011
107. Paul C.-P. Chao*, C. I. Shao, C. X. Lu and C. K. Sung, 2011, “A New Energy Harvest System with a Hula-Hoop Transformer, Micro-generator and Interface Energy-Harvesting Circuit,” Microsystem Technologies, accepted. (SCI Journal, Impact Factor =1.036, NSC 97-2220-E-009-029), Aug. 2011
108. Paul C.-P. Chao*, Chao-Jui Hsu and Yung-Yuan Kao, 2011, “A Thin Multi-Ring Negative Liquid Crystal Lens Enabled by High-κ Dielectric Material,” Microsystem Technologies, in press. (SCI Journal, Impact Factor =1.036, NSC 97-2220-E-009-029), Aug. 2011
109. Paul C.-P. Chao*, Pen-Yen Liao and Meng-Yen Tsai, 2011, “Robust Control Design for Precision Positioning of a Generic Piezoelectric System with Consideration of Microscopic Hysteresis Effects,” Microsystem Technologies, in press. (SCI Journal, Impact Factor =1.036, NSC 97-2220-E-009-029), Aug. 2011
110. T. C. Chan, C.-K. Sung and Paul C.-P. Chao, 2011, “Non-linear suspension of an automatic ball balancer,” International Journal of Non-Linear Mechanics, Vol. 46, pp. 415-424. (SCI Journal, Impact Factor =1.461)., Aug. 2011
111. C. X. Lu, C. C. Wang, C. K. Sung* and Paul C.-P Chao, 2011, “Dynamic analysis of a motion transformer mimicking a hula hoop,” ASME Journal of Vibration and Acoustics, Vol. 133, Iss. 1, pp. 014501-1-8. (SCI Journal, Impact Factor =1.211, NSC 97-2220-E-009-029)., Aug. 2011
112. Yi-Ling Yang*, Paul C.-P. Chao, C.-K. Sung, 2011, “Optimal Control of an Under-Actuated System for Landing at Desired Postures,” IEEE Transactions on Control System Technology, Vol. 19, No. 2, pp. 248-255. (SCI Journal, Impact Factor =1.211, NSC 97-2220-E-009-029)., Aug. 2011
113. Yi-Ling Yang, Paul C.-P. Chao, C.-K. Sung, 2009, “Landing Posture Control of a Generalized Twin-body System Using Methods of Input-output Linearization and Computed Torque,” IEEE Transactions on Mechatronics, vol. 14, no. 3, pp. 326-336. (SCI Journal, Impact Factor =1.641)., Nov. 2009
114. Paul C.P. Chao and Chi-Wei Chiu, 2006, “The development of an on-line precision inspection machine for assuring the dynamic quality of the pick-ups used in optical disc drives,” National Conference on Non-destructive Inspection, 2006, Taoyuan, Taiwan, R. O. C., Feb. 2009" href="/zh_tw/research/Journal_Papers/Paul-C-P-Chao-and-Chi-Wei-Chiu-2006-“The-development-of-an-on-line-precision-inspection-machine-for-assuring-the-dynamic-quality-of-the-pick-ups-used-in-optical-disc-drives-”-National-Conference-on-Non-destructive-Inspection-2006-Taoyuan-Taiwan-R-O-C-99941152" target="_blank">
115. Paul C.P. Chao and Chi-Wei Chiu, 2006, “The development of an on-line precision inspection machine for assuring the dynamic quality of the pick-ups used in optical disc drives,” National Conference on Non-destructive Inspection, 2006, Taoyuan, Taiwan, R. O. C., Feb. 2009
116. Yi-Ling Yang, Paul C.-P. Chao and Cheng-Kuo Sung, 2007, “Landing Posture Control of a Generalized Twin-body System via Methods of Input-output Linearization and Computed Torque,” Automation 2007 held on June 13-14, 2007 in Taipei, Taiwan., Feb. 2009" href="/zh_tw/research/Journal_Papers/ Yi-Ling-Yang-Paul-C-P-Chao-and-Cheng-Kuo-Sung-2007-“Landing-Posture-Control-of-a-Generalized-Twin-body-System-via-Methods-of-Input-output-Linearization-and-Computed-Torque-”-Automation-2007-held-on-June-13-14-2007-in-Taipei-Taiwan- -40105444" target="_blank">
117. Yi-Ling Yang, Paul C.-P. Chao and Cheng-Kuo Sung, 2007, “Landing Posture Control of a Generalized Twin-body System via Methods of Input-output Linearization and Computed Torque,” Automation 2007 held on June 13-14, 2007 in Taipei, Taiwan., Feb. 2009
118. Yi-Ling Yang, Paul C.-P. Chao, Cheng-Kuo Sung, “Landing Posture Control of a Generalized Twin-body System with a three-DOF joint,” The 33rd Annual Conference of the IEEE Industrial Electronics Society, Nov. 5-8, 2007, Taipei, Taiwan. (EI Publication), Feb. 2009" href="/zh_tw/research/Journal_Papers/Yi-Ling-Yang-Paul-C-P-Chao-Cheng-Kuo-Sung-“Landing-Posture-Control-of-a-Generalized-Twin-body-System-with-a-three-DOF-joint-”-The-33rd-Annual-Conference-of-the-IEEE-Industrial-Electronics-Society-Nov-5-8-2007-Taipei-Taiwan-EI-Publication- -17743830" target="_blank">
119. Yi-Ling Yang, Paul C.-P. Chao, Cheng-Kuo Sung, “Landing Posture Control of a Generalized Twin-body System with a three-DOF joint,” The 33rd Annual Conference of the IEEE Industrial Electronics Society, Nov. 5-8, 2007, Taipei, Taiwan. (EI Publication), Feb. 2009
120. Paul C.-P. Chao*, Lun-De Liao, Ming-Hsun Chung and Jeng-Sheng Hunag, 2008, “Precision Positioning and Experimental Verification of a Parallel Piezo-Beam Lens Holder for Fine Track-Following in a Dual-Stage Actuator for Data Storage Devices,” Microsystem Technologies, submitted for review. (SCI Journal, Impact Factor =0.720, 95-2745-E-033-004-URD.), Feb. 2009" href="/zh_tw/research/Journal_Papers/Paul-C-P-Chao-Lun-De-Liao-Ming-Hsun-Chung-and-Jeng-Sheng-Hunag-2008-“Precision-Positioning-and-Experimental-Verification-of-a-Parallel-Piezo-Beam-Lens-Holder-for-Fine-Track-Following-in-a-Dual-Stage-Actuator-for-Data-Storage-Devices-”-Microsystem-Technologies-submitted-for-review-SCI-Journal-Impact-Factor-0-720-95-2745-E-033-004-URD-10480536" target="_blank">Paul C.-P. Chao*, Lun-De Liao, Ming-Hsun Chung and Jeng-Sheng Hunag, 2008, “Precision Positioning and Experimental Verification of a Parallel Piezo-Beam Lens Holder for Fine Track-Following in a Dual-Stage Actuator for Data Storage Devices,” Microsystem Technologies, submitted for review. (SCI Journal, Impact Factor =0.720, 95-2745-E-033-004-URD.), Feb. 2009
121. Paul C.-P. Chao*, Lun-De Liao, Ming-Hsun Chung and Jeng-Sheng Hunag, 2008, “Precision Positioning and Experimental Verification of a Parallel Piezo-Beam Lens Holder for Fine Track-Following in a Dual-Stage Actuator for Data Storage Devices,” Microsystem Technologies, submitted for review. (SCI Journal, Impact Factor =0.720, 95-2745-E-033-004-URD.), Feb. 2009" href="/zh_tw/research/Journal_Papers/Paul-C-P-Chao-Lun-De-Liao-Ming-Hsun-Chung-and-Jeng-Sheng-Hunag-2008-“Precision-Positioning-and-Experimental-Verification-of-a-Parallel-Piezo-Beam-Lens-Holder-for-Fine-Track-Following-in-a-Dual-Stage-Actuator-for-Data-Storage-Devices-”-Microsystem-Technologies-submitted-for-review-SCI-Journal-Impact-Factor-0-720-95-2745-E-033-004-URD-15852834" target="_blank">Paul C.-P. Chao*, Lun-De Liao, Ming-Hsun Chung and Jeng-Sheng Hunag, 2008, “Precision Positioning and Experimental Verification of a Parallel Piezo-Beam Lens Holder for Fine Track-Following in a Dual-Stage Actuator for Data Storage Devices,” Microsystem Technologies, submitted for review. (SCI Journal, Impact Factor =0.720, 95-2745-E-033-004-URD.), Feb. 2009
122. Paul C.-P. Chao* J.-Y. Shen and J.-S. Huang, 2008, “Deign and Experimental Verification of a Controller with Auto-Tuned Parameters for Precision Positioning of a Three-axis Optical Pickup,” Microsystem Technologies, submitted for review. (SCI Journal, Impact Factor =0.720, 95-2745-E-033-004-URD.), Feb. 2009" href="/zh_tw/research/Journal_Papers/Paul-C-P-Chao-J-Y-Shen-and-J-S-Huang-2008-“Deign-and-Experimental-Verification-of-a-Controller-with-Auto-Tuned-Parameters-for-Precision-Positioning-of-a-Three-axis-Optical-Pickup-”-Microsystem-Technologies-submitted-for-review-SCI-Journal-Impact-Factor-0-720-95-2745-E-033-004-URD-81384219" target="_blank">
123. Paul C.-P. Chao* J.-Y. Shen and J.-S. Huang, 2008, “Deign and Experimental Verification of a Controller with Auto-Tuned Parameters for Precision Positioning of a Three-axis Optical Pickup,” Microsystem Technologies, submitted for review. (SCI Journal, Impact Factor =0.720, 95-2745-E-033-004-URD.), Feb. 2009
124. C.-W. Chiu, Paul C.-P. Chao* and J.-Y. Shen, 2008, “Deign and Construction of an In-situ Inspection Machine for Ensuring the Dynamic Performance of Fluid Bearings in Data Storage Devices,” Microsystem Technologies, submitted for review. (SCI Journal, Impact Factor =0.720, 95-2745-E-033-004-URD.), Feb. 2009" href="/zh_tw/research/Journal_Papers/C-W-Chiu-Paul-C-P-Chao-and-J-Y-Shen-2008-“Deign-and-Construction-of-an-In-situ-Inspection-Machine-for-Ensuring-the-Dynamic-Performance-of-Fluid-Bearings-in-Data-Storage-Devices-”-Microsystem-Technologies-submitted-for-review-SCI-Journal-Impact-Factor-0-720-95-2745-E-033-004-URD-55512488" target="_blank">C.-W. Chiu, Paul C.-P. Chao* and J.-Y. Shen, 2008, “Deign and Construction of an In-situ Inspection Machine for Ensuring the Dynamic Performance of Fluid Bearings in Data Storage Devices,” Microsystem Technologies, submitted for review. (SCI Journal, Impact Factor =0.720, 95-2745-E-033-004-URD.), Feb. 2009
125. Chang-Po Chao* and Cheng-Liang Lai, 2003, “Boundary Control of an Axially Moving String via Fuzzy Sliding-Mode and Fuzzy Neural Network Methods,” Journal of Sound and Vibration, Vol. 262, No.4, pp 795 - 813. (SCI Journal, Impact Factor = 0.724, NSC NSC89-2218- E033-024), Feb. 2009" href="/zh_tw/research/Journal_Papers/Chang-Po-Chao-and-Cheng-Liang-Lai-2003-“Boundary-Control-of-an-Axially-Moving-String-via-Fuzzy-Sliding-Mode-and-Fuzzy-Neural-Network-Methods-”-Journal-of-Sound-and-Vibration-Vol-262-No-4-pp-795-813-SCI-Journal-Impact-Factor-0-724-NSC-NSC89-2218-E033-024-2544627" target="_blank">Chang-Po Chao* and Cheng-Liang Lai, 2003, “Boundary Control of an Axially Moving String via Fuzzy Sliding-Mode and Fuzzy Neural Network Methods,” Journal of Sound and Vibration, Vol. 262, No.4, pp 795 - 813. (SCI Journal, Impact Factor = 0.724, NSC NSC89-2218- E033-024), Feb. 2009
126. Paul C.-P. Chao*, Yaw-Der Huang and Cheng-Kuo Sung, Nov, 2003, “Non-planar Dynamic Modeling and Analysis of an Automatic Balancer System Equipped with Multiple Balancing Balls,” Mechanism and Machine Theory, Vol 38, No. 11, pp. 1289-1305. (SCI Journal, Impact Factor =0.459, NSC89-2218- E033-024), Feb. 2009" href="/zh_tw/research/Journal_Papers/Paul-C-P-Chao-Yaw-Der-Huang-and-Cheng-Kuo-Sung-Nov-2003-“Non-planar-Dynamic-Modeling-and-Analysis-of-an-Automatic-Balancer-System-Equipped-with-Multiple-Balancing-Balls-”-Mechanism-and-Machine-Theory-Vol-38-No-11-pp-1289-1305-SCI-Journal-Impact-Factor-0-459-NSC89-2218-E033-024-23183716" target="_blank">
127. Paul C.-P. Chao*, Yaw-Der Huang and Cheng-Kuo Sung, Nov, 2003, “Non-planar Dynamic Modeling and Analysis of an Automatic Balancer System Equipped with Multiple Balancing Balls,” Mechanism and Machine Theory, Vol 38, No. 11, pp. 1289-1305. (SCI Journal, Impact Factor =0.459, NSC89-2218- E033-024), Feb. 2009
128. Paul C.-P. Chao*, Jeng-Sheng Huang, and Cheng-Liang Lai, July, 2003, “Nonlinear Dynamic Modeling and Actuation Strategy for a Three-axis Four-wire Type Optical Pickup,” Sensors and Actuators: A. Physical, Vol. 105, No. 2, pp. 171- 182. (SCI Journal, Impact Factor =1.422, NSC 90-2212-E033-010), Feb. 2009" href="/zh_tw/research/Journal_Papers/Paul-C-P-Chao-Jeng-Sheng-Huang-and-Cheng-Liang-Lai-July-2003-“Nonlinear-Dynamic-Modeling-and-Actuation-Strategy-for-a-Three-axis-Four-wire-Type-Optical-Pickup-”-Sensors-and-Actuators-A-Physical-Vol-105-No-2-pp-171-182-SCI-Journal-Impact-Factor-1-422-NSC-90-2212-E033-010-20956457" target="_blank">Paul C.-P. Chao*, Jeng-Sheng Huang, and Cheng-Liang Lai, July, 2003, “Nonlinear Dynamic Modeling and Actuation Strategy for a Three-axis Four-wire Type Optical Pickup,” Sensors and Actuators: A. Physical, Vol. 105, No. 2, pp. 171- 182. (SCI Journal, Impact Factor =1.422, NSC 90-2212-E033-010), Feb. 2009
129. Chun-Chieh Wang, Cheng-Kuo Sung*, and Paul C. P. Chao, 2003, “Measurement system for the vibrations of an optical disc drive equipped with the automatic balancer system,” Mechatronics Magazine, Vol. 11, pp. 122-125. (Chinese magazine), Feb. 2009" href="/zh_tw/research/Journal_Papers/Chun-Chieh-Wang-Cheng-Kuo-Sung-and-Paul-C-P-Chao-2003-“Measurement-system-for-the-vibrations-of-an-optical-disc-drive-equipped-with-the-automatic-balancer-system-”-Mechatronics-Magazine-Vol-11-pp-122-125-Chinese-magazine-98264746" target="_blank">Chun-Chieh Wang, Cheng-Kuo Sung*, and Paul C. P. Chao, 2003, “Measurement system for the vibrations of an optical disc drive equipped with the automatic balancer system,” Mechatronics Magazine, Vol. 11, pp. 122-125. (Chinese magazine), Feb. 2009
130. Paul C.-P. Chao*, Jeng-Sheng Huang and Chi-Wei Chiu, 2004, “Optimal Profile Design for the Resonator Beam of an Ultrasonic Motor via Finite Element Modeling and Taguchi Methodology,” ASME Journal of Vibration and Acoustics, Vol. 126, pp. 465- 475. (SCI Journal, Impact Factor = 0.694, NSC 90-2212-E033-010), Feb. 2009" href="/zh_tw/research/Journal_Papers/Paul-C-P-Chao-Jeng-Sheng-Huang-and-Chi-Wei-Chiu-2004-“Optimal-Profile-Design-for-the-Resonator-Beam-of-an-Ultrasonic-Motor-via-Finite-Element-Modeling-and-Taguchi-Methodology-”-ASME-Journal-of-Vibration-and-Acoustics-Vol-126-pp-465-475-SCI-Journal-Impact-Factor-0-694-NSC-90-2212-E033-010-71774958" target="_blank">Paul C.-P. Chao*, Jeng-Sheng Huang and Chi-Wei Chiu, 2004, “Optimal Profile Design for the Resonator Beam of an Ultrasonic Motor via Finite Element Modeling and Taguchi Methodology,” ASME Journal of Vibration and Acoustics, Vol. 126, pp. 465- 475. (SCI Journal, Impact Factor = 0.694, NSC 90-2212-E033-010), Feb. 2009
131. Paul C.-P. Chao*, Cheng-Liang Lai, and Jeng-Sheng Huang, 2004, “Intelligent Actuation Strategy for a Three-DOF Four-wire Type Optical Pickup,” Sensors and Actuators: A. Physical, Vol. 117, No. 1, pp. 28- 40. (SCI Journal, Impact Factor =1.462, NSC 91-2212-E033-004), Feb. 2009" href="/zh_tw/research/Journal_Papers/Paul-C-P-Chao-Cheng-Liang-Lai-and-Jeng-Sheng-Huang-2004-“Intelligent-Actuation-Strategy-for-a-Three-DOF-Four-wire-Type-Optical-Pickup-”-Sensors-and-Actuators-A-Physical-Vol-117-No-1-pp-28-40-SCI-Journal-Impact-Factor-1-462-NSC-91-2212-E033-004-99592394" target="_blank">
132. Paul C.-P. Chao*, Cheng-Liang Lai, and Jeng-Sheng Huang, 2004, “Intelligent Actuation Strategy for a Three-DOF Four-wire Type Optical Pickup,” Sensors and Actuators: A. Physical, Vol. 117, No. 1, pp. 28- 40. (SCI Journal, Impact Factor =1.462, NSC 91-2212-E033-004), Feb. 2009
133. Paul C.-P. Chao* and Jeng-Sheng Huang, 2005, “Calculating Rotordynamic Coefficients of a Ferrofluid -lubricated and Herringbone-Grooved Journal Bearing via Finite Difference Analysis,” Tribology Letters, Vol. 19, No. 2. pp. 101-110. (SCI Journal, Impact Factor =1.504, NSC 92-2212-E033-01), Feb. 2009" href="/zh_tw/research/Journal_Papers/Paul-C-P-Chao-and-Jeng-Sheng-Huang-2005-“Calculating-Rotordynamic-Coefficients-of-a-Ferrofluid-lubricated-and-Herringbone-Grooved-Journal-Bearing-via-Finite-Difference-Analysis-”-Tribology-Letters-Vol-19-No-2-pp-101-110-SCI-Journal-Impact-Factor-1-504-NSC-92-2212-E033-01-59764958" target="_blank">Paul C.-P. Chao* and Jeng-Sheng Huang, 2005, “Calculating Rotordynamic Coefficients of a Ferrofluid -lubricated and Herringbone-Grooved Journal Bearing via Finite Difference Analysis,” Tribology Letters, Vol. 19, No. 2. pp. 101-110. (SCI Journal, Impact Factor =1.504, NSC 92-2212-E033-01), Feb. 2009
134. Paul C.-P. Chao*, Cheng-Kuo Sung and Hui-Chung Leu, 2005, “Effects of Rolling Friction of the Balancing Balls on the Automatic Ball Balancer for Optical Disk Drives,” ASME Journal of Tribology, Vol. 127, pp. 845-856. (SCI Journal, Impact Factor =0.682, NSC 92-2212-E033-01), Feb. 2009" href="/zh_tw/research/Journal_Papers/Paul-C-P-Chao-Cheng-Kuo-Sung-and-Hui-Chung-Leu-2005-“Effects-of-Rolling-Friction-of-the-Balancing-Balls-on-the-Automatic-Ball-Balancer-for-Optical-Disk-Drives-”-ASME-Journal-of-Tribology-Vol-127-pp-845-856-SCI-Journal-Impact-Factor-0-682-NSC-92-2212-E033-01-55200784" target="_blank">
135. Paul C.-P. Chao*, Cheng-Kuo Sung and Hui-Chung Leu, 2005, “Effects of Rolling Friction of the Balancing Balls on the Automatic Ball Balancer for Optical Disk Drives,” ASME Journal of Tribology, Vol. 127, pp. 845-856. (SCI Journal, Impact Factor =0.682, NSC 92-2212-E033-01), Feb. 2009
136. Paul C.-P. Chao*, Chun-Chieh Wang, and Cheng-Kuo Sung, 2005, “Dynamic Analysis of the Optical Disk Drives Equipped with an Automatic Ball Balancer with Consideration of Torsional Motion,” ASME Journal of Applied Mechanics, Vol. 72, pp. 826-842. (SCI Journal, Impact Factor =0.752, NSC 91-2212-E033-004), Feb. 2009" href="/zh_tw/research/Journal_Papers/Paul-C-P-Chao-Chun-Chieh-Wang-and-Cheng-Kuo-Sung-2005-“Dynamic-Analysis-of-the-Optical-Disk-Drives-Equipped-with-an-Automatic-Ball-Balancer-with-Consideration-of-Torsional-Motion-”-ASME-Journal-of-Applied-Mechanics-Vol-72-pp-826-842-SCI-Journal-Impact-Factor-0-752-NSC-91-2212-E033-004-64489180" target="_blank">
137. Paul C.-P. Chao*, Chun-Chieh Wang, and Cheng-Kuo Sung, 2005, “Dynamic Analysis of the Optical Disk Drives Equipped with an Automatic Ball Balancer with Consideration of Torsional Motion,” ASME Journal of Applied Mechanics, Vol. 72, pp. 826-842. (SCI Journal, Impact Factor =0.752, NSC 91-2212-E033-004), Feb. 2009
138. Paul C.-P. Chao*, Chun-Lung Huang, Cheng-Kuo Sung and Jeng-Sheng Haung, 2005, “Precision Re-positioning of the balancing ball in an auto-balancer system via a fuzzy speed regulator equipped with a sliding-mode observer,” IEEE Transactions on Control Systems Technology, Vol. 13, No. 6, pp. 1107-1118. (SCI Journal, Impact Factor =1.027, NSC 91-2212-E033-004), Feb. 2009" href="/zh_tw/research/Journal_Papers/Paul-C-P-Chao-Chun-Lung-Huang-Cheng-Kuo-Sung-and-Jeng-Sheng-Haung-2005-“Precision-Re-positioning-of-the-balancing-ball-in-an-auto-balancer-system-via-a-fuzzy-speed-regulator-equipped-with-a-sliding-mode-observer-”-IEEE-Transactions-on-Control-Systems-Technology-Vol-13-No-6-pp-1107-1118-SCI-Journal-Impact-Factor-1-027-NSC-91-2212-E033-004-23993783" target="_blank">
139. Paul C.-P. Chao*, Chun-Lung Huang, Cheng-Kuo Sung and Jeng-Sheng Haung, 2005, “Precision Re-positioning of the balancing ball in an auto-balancer system via a fuzzy speed regulator equipped with a sliding-mode observer,” IEEE Transactions on Control Systems Technology, Vol. 13, No. 6, pp. 1107-1118. (SCI Journal, Impact Factor =1.027, NSC 91-2212-E033-004), Feb. 2009
140. Paul C.-P. Chao*, Pen-Yen Liao and Jeng-Sheng Huang, 2006, “A Novel Microscopic Modeling on Hysteresis Effects of Piezoelectric Structures with Assistance from Finite Elements,” International Journal of Nonlinear Sciences and Numerical Simulations, Vol. 7, No. 3, pp. 269-274. (SCI Journal, Impact Factor =4.386, Ranking 1/150, Mathematics, Applied, NSC93-2212-E-033-001 and 94-2622-E-033-001-CC3)., Feb. 2009" href="/zh_tw/research/Journal_Papers/Paul-C-P-Chao-Pen-Yen-Liao-and-Jeng-Sheng-Huang-2006-“A-Novel-Microscopic-Modeling-on-Hysteresis-Effects-of-Piezoelectric-Structures-with-Assistance-from-Finite-Elements-”-International-Journal-of-Nonlinear-Sciences-and-Numerical-Simulations-Vol-7-No-3-pp-269-274-SCI-Journal-Impact-Factor-4-386-Ranking-1-150-Mathematics-Applied-NSC93-2212-E-033-001-and-94-2622-E-033-001-CC3-44010456" target="_blank">Paul C.-P. Chao*, Pen-Yen Liao and Jeng-Sheng Huang, 2006, “A Novel Microscopic Modeling on Hysteresis Effects of Piezoelectric Structures with Assistance from Finite Elements,” International Journal of Nonlinear Sciences and Numerical Simulations, Vol. 7, No. 3, pp. 269-274. (SCI Journal, Impact Factor =4.386, Ranking 1/150, Mathematics, Applied, NSC93-2212-E-033-001 and 94-2622-E-033-001-CC3)., Feb. 2009
141. Paul C.-P. Chao*, Pen-Yen Liao and Jeng-Sheng Huang, 2006, “A Novel Microscopic Modeling on Hysteresis Effects of Piezoelectric Structures with Assistance from Finite Elements,” International Journal of Nonlinear Sciences and Numerical Simulations, Vol. 7, No. 3, pp. 269-274. (SCI Journal, Impact Factor =4.386, Ranking 1/150, Mathematics, Applied, NSC93-2212-E-033-001 and 94-2622-E-033-001-CC3)., Feb. 2009" href="/zh_tw/research/Journal_Papers/Paul-C-P-Chao-Pen-Yen-Liao-and-Jeng-Sheng-Huang-2006-“A-Novel-Microscopic-Modeling-on-Hysteresis-Effects-of-Piezoelectric-Structures-with-Assistance-from-Finite-Elements-”-International-Journal-of-Nonlinear-Sciences-and-Numerical-Simulations-Vol-7-No-3-pp-269-274-SCI-Journal-Impact-Factor-4-386-Ranking-1-150-Mathematics-Applied-NSC93-2212-E-033-001-and-94-2622-E-033-001-CC3-64866648" target="_blank">Paul C.-P. Chao*, Pen-Yen Liao and Jeng-Sheng Huang, 2006, “A Novel Microscopic Modeling on Hysteresis Effects of Piezoelectric Structures with Assistance from Finite Elements,” International Journal of Nonlinear Sciences and Numerical Simulations, Vol. 7, No. 3, pp. 269-274. (SCI Journal, Impact Factor =4.386, Ranking 1/150, Mathematics, Applied, NSC93-2212-E-033-001 and 94-2622-E-033-001-CC3)., Feb. 2009
142. Paul C.-P. Chao*, Ben-Cheng Yo, Cheng-Kuo Sung and Chi-Wei Chiu, 2006, “Nonlinear Dynamic Effects of Damping Washers on the Performance of Automatic Ball Balancers in Optical Disc Drives,” International Journal of Nonlinear Sciences and Numerical Simulations, Vol. 7, No. 3, pp. 275-278. (SCI Journal, Impact Factor =4.386, Ranking 1/150, Mathematics, Applied, NSC 92-2622-E-033-014 and 92-2212-E-033-001), Feb. 2009" href="/zh_tw/research/Journal_Papers/Paul-C-P-Chao-Ben-Cheng-Yo-Cheng-Kuo-Sung-and-Chi-Wei-Chiu-2006-“Nonlinear-Dynamic-Effects-of-Damping-Washers-on-the-Performance-of-Automatic-Ball-Balancers-in-Optical-Disc-Drives-”-International-Journal-of-Nonlinear-Sciences-and-Numerical-Simulations-Vol-7-No-3-pp-275-278-SCI-Journal-Impact-Factor-4-386-Ranking-1-150-Mathematics-Applied-NSC-92-2622-E-033-014-and-92-2212-E-033-001-20116584" target="_blank">Paul C.-P. Chao*, Ben-Cheng Yo, Cheng-Kuo Sung and Chi-Wei Chiu, 2006, “Nonlinear Dynamic Effects of Damping Washers on the Performance of Automatic Ball Balancers in Optical Disc Drives,” International Journal of Nonlinear Sciences and Numerical Simulations, Vol. 7, No. 3, pp. 275-278. (SCI Journal, Impact Factor =4.386, Ranking 1/150, Mathematics, Applied, NSC 92-2622-E-033-014 and 92-2212-E-033-001), Feb. 2009
143. Paul C.-P. Chao*, Chi-Wei Chiu and C. Y. Tsai, 2006, “A Novel Method to Predict the Pull-in Voltage in a Closed Form for Deformed Micro-plates Actuated by a Distributed Electrostatic Force,” Journal of Micromechanics and Micro-engineering, Vol. 16, pp. 986-998. (SCI Journal, Impact Factor =2.321, Ranking 6/109, Mechanics, NSC94-2212-E-033-010), Feb. 2009" href="/zh_tw/research/Journal_Papers/Paul-C-P-Chao-Chi-Wei-Chiu-and-C-Y-Tsai-2006-“A-Novel-Method-to-Predict-the-Pull-in-Voltage-in-a-Closed-Form-for-Deformed-Micro-plates-Actuated-by-a-Distributed-Electrostatic-Force-”-Journal-of-Micromechanics-and-Micro-engineering-Vol-16-pp-986-998-SCI-Journal-Impact-Factor-2-321-Ranking-6-109-Mechanics-NSC94-2212-E-033-010-57887737" target="_blank">
144. Paul C.-P. Chao*, Chi-Wei Chiu and C. Y. Tsai, 2006, “A Novel Method to Predict the Pull-in Voltage in a Closed Form for Deformed Micro-plates Actuated by a Distributed Electrostatic Force,” Journal of Micromechanics and Micro-engineering, Vol. 16, pp. 986-998. (SCI Journal, Impact Factor =2.321, Ranking 6/109, Mechanics, NSC94-2212-E-033-010), Feb. 2009
145. Chi-Wei Chiu* and Paul C.-P. Chao, 2006, “Development of a Precision Inspection Machine for Assuring the Dynamic Quality of the Pick-ups Used in Optical Disc Drives,” Journal of Chinese Society of Mechanical Engineering, Series C, Vol. 27, No. 5, pp. 581- 586. (EI Journal, NSC 95-2622-E-009-014-CC3), Feb. 2009" href="/zh_tw/research/Journal_Papers/Chi-Wei-Chiu-and-Paul-C-P-Chao-2006-“Development-of-a-Precision-Inspection-Machine-for-Assuring-the-Dynamic-Quality-of-the-Pick-ups-Used-in-Optical-Disc-Drives-”-Journal-of-Chinese-Society-of-Mechanical-Engineering-Series-C-Vol-27-No-5-pp-581-586-EI-Journal-NSC-95-2622-E-009-014-CC3-2313305" target="_blank">
146. Chi-Wei Chiu* and Paul C.-P. Chao, 2006, “Development of a Precision Inspection Machine for Assuring the Dynamic Quality of the Pick-ups Used in Optical Disc Drives,” Journal of Chinese Society of Mechanical Engineering, Series C, Vol. 27, No. 5, pp. 581- 586. (EI Journal, NSC 95-2622-E-009-014-CC3), Feb. 2009
147. Paul C.-P. Chao* and Chien-Yu Shen, 2007, “Design and Implementation of a Sliding-mode Controller and a High-Gain Observer for Output Tracking of a Three-axis Pickup,” Sensors and Actuators: A. Physical, Vol. 135, pp. 713- 730. (SCI Journal, Impact Factor =1.434, NSC 93-2212-E-033-001 and 94-2622-E-033-001-CC3), Feb. 2009" href="/zh_tw/research/Journal_Papers/Paul-C-P-Chao-and-Chien-Yu-Shen-2007-“Design-and-Implementation-of-a-Sliding-mode-Controller-and-a-High-Gain-Observer-for-Output-Tracking-of-a-Three-axis-Pickup-”-Sensors-and-Actuators-A-Physical-Vol-135-pp-713-730- -SCI-Journal-Impact-Factor-1-434-NSC-93-2212-E-033-001-and-94-2622-E-033-001-CC3-88269323" target="_blank">Paul C.-P. Chao* and Chien-Yu Shen, 2007, “Design and Implementation of a Sliding-mode Controller and a High-Gain Observer for Output Tracking of a Three-axis Pickup,” Sensors and Actuators: A. Physical, Vol. 135, pp. 713- 730. (SCI Journal, Impact Factor =1.434, NSC 93-2212-E-033-001 and 94-2622-E-033-001-CC3), Feb. 2009
148. Paul C.-P. Chao*, Cheng-Kuo Sung, Szu-Tuo Wu and Jeng-Sheng Huang, 2007, “Non-planar Modeling and Experimental Validation of a Spindle-Disk System Equipped with an Automatic Ball Balancer System in Optical Disk Drives,” Microsystem Technologies, Vol. 13, pp. 1227-1239. (SCI Journal, Impact Factor =0.720, NSC 94-2622-E-033-011-CC3 and 94-2212-E-033-010), Feb. 2009" href="/zh_tw/research/Journal_Papers/Paul-C-P-Chao-Cheng-Kuo-Sung-Szu-Tuo-Wu-and-Jeng-Sheng-Huang-2007-“Non-planar-Modeling-and-Experimental-Validation-of-a-Spindle-Disk-System-Equipped-with-an-Automatic-Ball-Balancer-System-in-Optical-Disk-Drives-”-Microsystem-Technologies-Vol-13-pp-1227-1239-SCI-Journal-Impact-Factor-0-720-NSC-94-2622-E-033-011-CC3-and-94-2212-E-033-010-30206735" target="_blank">Paul C.-P. Chao*, Cheng-Kuo Sung, Szu-Tuo Wu and Jeng-Sheng Huang, 2007, “Non-planar Modeling and Experimental Validation of a Spindle-Disk System Equipped with an Automatic Ball Balancer System in Optical Disk Drives,” Microsystem Technologies, Vol. 13, pp. 1227-1239. (SCI Journal, Impact Factor =0.720, NSC 94-2622-E-033-011-CC3 and 94-2212-E-033-010), Feb. 2009
149. Paul C.-P. Chao* and Sung-Ching Wu, 2007, “Optimal Design of Magnetic Zooming Mechanism Used in Cameras of Mobile Phones via Genetic Algorithm,” IEEE Transactions on Magnetics, Vol. 43, No. 6, pp. 2579-2581. (SCI Journal, Impact Factor =1.014, NSC 95-2745-E-033-004-URD), Feb. 2009" href="/zh_tw/research/Journal_Papers/ Paul-C-P-Chao-and-Sung-Ching-Wu-2007-“Optimal-Design-of-Magnetic-Zooming-Mechanism-Used-in-Cameras-of-Mobile-Phones-via-Genetic-Algorithm-”-IEEE-Transactions-on-Magnetics-Vol-43-No-6-pp-2579-2581-SCI-Journal-Impact-Factor-1-014-NSC-95-2745-E-033-004-URD-1642975" target="_blank">
150. Paul C.-P. Chao* and Sung-Ching Wu, 2007, “Optimal Design of Magnetic Zooming Mechanism Used in Cameras of Mobile Phones via Genetic Algorithm,” IEEE Transactions on Magnetics, Vol. 43, No. 6, pp. 2579-2581. (SCI Journal, Impact Factor =1.014, NSC 95-2745-E-033-004-URD), Feb. 2009
151. Paul C.-P. Chao* and I-Ting Wang, 2007, “Dynamical Modeling and Experimental Validation of a Micro-speaker with Corrugated Diaphragm for Mobile Phones”, Microsystem Technologies, Vol. 13, pp. 1241-1252. (SCI Journal, Impact Factor =0.720, NSC94-2212-E-033-010, 94-2745-E-033-004-URD and 94-2622-E-033-011-CC3), Feb. 2009" href="/zh_tw/research/Journal_Papers/Paul-C-P-Chao-and-I-Ting-Wang-2007-“Dynamical-Modeling-and-Experimental-Validation-of-a-Micro-speaker-with-Corrugated-Diaphragm-for-Mobile-Phones”-Microsystem-Technologies-Vol-13-pp-1241-1252-SCI-Journal-Impact-Factor-0-720-NSC94-2212-E-033-010-94-2745-E-033-004-URD-and-94-2622-E-033-011-CC3-3854775" target="_blank">Paul C.-P. Chao* and I-Ting Wang, 2007, “Dynamical Modeling and Experimental Validation of a Micro-speaker with Corrugated Diaphragm for Mobile Phones”, Microsystem Technologies, Vol. 13, pp. 1241-1252. (SCI Journal, Impact Factor =0.720, NSC94-2212-E-033-010, 94-2745-E-033-004-URD and 94-2622-E-033-011-CC3), Feb. 2009
152. Paul C.-P. Chao*, Chi-Wei Chiu, and Yuan Hsu-Pang, 2007, “Magneto-Electro- Dynamical Modeling and Design of a Micro-Speaker Used for Mobile Phones with Considerations of Diaphragm Corrugation and Air Closure,” IEEE Transactions on Magnetics Vol. 43, No. 6, pp. 2585-2587. (SCI Journal, Impact Factor =1.014, 95-2745-E-033-004-URD), Feb. 2009" href="/zh_tw/research/Journal_Papers/Paul-C-P-Chao-Chi-Wei-Chiu-and-Yuan-Hsu-Pang-2007-“Magneto-Electro-Dynamical-Modeling-and-Design-of-a-Micro-Speaker-Used-for-Mobile-Phones-with-Considerations-of-Diaphragm-Corrugation-and-Air-Closure-”-IEEE-Transactions-on-Magnetics-Vol-43-No-6-pp-2585-2587-SCI-Journal-Impact-Factor-1-014-95-2745-E-033-004-URD-21687733" target="_blank">Paul C.-P. Chao*, Chi-Wei Chiu, and Yuan Hsu-Pang, 2007, “Magneto-Electro- Dynamical Modeling and Design of a Micro-Speaker Used for Mobile Phones with Considerations of Diaphragm Corrugation and Air Closure,” IEEE Transactions on Magnetics Vol. 43, No. 6, pp. 2585-2587. (SCI Journal, Impact Factor =1.014, 95-2745-E-033-004-URD), Feb. 2009
153. Paul C.-P. Chao* and Chien-Yu Shen, 2007, “Dynamic Modeling and Experimental Verification of a Piezoelectric Part Feeder in a Structure with Parallel Bimorph Beams,” Ultrasonics, Vol. 46, pp. 205-218. (SCI Journal, Impact Factor =1.322, NSC 95-2221-E-009-367), Feb. 2009" href="/zh_tw/research/Journal_Papers/Paul-C-P-Chao-and-Chien-Yu-Shen-2007-“Dynamic-Modeling-and-Experimental-Verification-of-a-Piezoelectric-Part-Feeder-in-a-Structure-with-Parallel-Bimorph-Beams-”-Ultrasonics-Vol-46-pp-205-218-SCI-Journal-Impact-Factor-1-322-NSC-95-2221-E-009-367-21038985" target="_blank">
154. Paul C.-P. Chao* and Chien-Yu Shen, 2007, “Dynamic Modeling and Experimental Verification of a Piezoelectric Part Feeder in a Structure with Parallel Bimorph Beams,” Ultrasonics, Vol. 46, pp. 205-218. (SCI Journal, Impact Factor =1.322, NSC 95-2221-E-009-367), Feb. 2009
155. Chi-Wei Chiu, Paul C.-P. Chao*, and Din-Yuan Wu, 2007, “Optimal Design of Magnetic Actuated Optical Image Stabilization Mechanism for Cameras in Mobile Phones via Genetic Algorithm,” IEEE Transactions on Magnetics, Vol. 43, No. 6, pp. 2582-2584. (SCI Journal, Impact Factor =1.014, NSC 95-2745-E-033-004-URD), Feb. 2009" href="/zh_tw/research/Journal_Papers/Chi-Wei-Chiu-Paul-C-P-Chao-and-Din-Yuan-Wu-2007-“Optimal-Design-of-Magnetic-Actuated-Optical-Image-Stabilization-Mechanism-for-Cameras-in-Mobile-Phones-via-Genetic-Algorithm-”-IEEE-Transactions-on-Magnetics-Vol-43-No-6-pp-2582-2584-SCI-Journal-Impact-Factor-1-014-NSC-95-2745-E-033-004-URD-39284427" target="_blank">Chi-Wei Chiu, Paul C.-P. Chao*, and Din-Yuan Wu, 2007, “Optimal Design of Magnetic Actuated Optical Image Stabilization Mechanism for Cameras in Mobile Phones via Genetic Algorithm,” IEEE Transactions on Magnetics, Vol. 43, No. 6, pp. 2582-2584. (SCI Journal, Impact Factor =1.014, NSC 95-2745-E-033-004-URD), Feb. 2009
156. Paul C.-P. Chao*, Lun-De Liao, Chi-Wei Chiu and Chien-Yu Shen, 2008, “Design of a Highly-Efficient Light Guide Plate for the Edge Lighting Backlight Module,” Key Engineering Material, Vol. 364-366, pp. 128-131. (EI Journal, NSC 95-2221-E-009-367), Feb. 2009" href="/zh_tw/research/Journal_Papers/Paul-C-P-Chao-Lun-De-Liao-Chi-Wei-Chiu-and-Chien-Yu-Shen-2008-“Design-of-a-Highly-Efficient-Light-Guide-Plate-for-the-Edge-Lighting-Backlight-Module-”-Key-Engineering-Material-Vol-364-366-pp-128-131-EI-Journal-NSC-95-2221-E-009-367-19732862" target="_blank">Paul C.-P. Chao*, Lun-De Liao, Chi-Wei Chiu and Chien-Yu Shen, 2008, “Design of a Highly-Efficient Light Guide Plate for the Edge Lighting Backlight Module,” Key Engineering Material, Vol. 364-366, pp. 128-131. (EI Journal, NSC 95-2221-E-009-367), Feb. 2009
157. Paul C.-P. Chao*, Lun-De Liao, Chi-Wei Chiu and Chien-Yu Shen, 2008, “Enhancement of the Optical Performances for the LED Backlight Systems with a Novel Lens-Cap,” Key Engineering Material, Vol. 364-366, pp. 132-137. (EI Journal, NSC 995-2622-E-009-014-CC3), Feb. 2009" href="/zh_tw/research/Journal_Papers/Paul-C-P-Chao-Lun-De-Liao-Chi-Wei-Chiu-and-Chien-Yu-Shen-2008-“Enhancement-of-the-Optical-Performances-for-the-LED-Backlight-Systems-with-a-Novel-Lens-Cap-”-Key-Engineering-Material-Vol-364-366-pp-132-137-EI-Journal-NSC-995-2622-E-009-014-CC3-2225666" target="_blank">Paul C.-P. Chao*, Lun-De Liao, Chi-Wei Chiu and Chien-Yu Shen, 2008, “Enhancement of the Optical Performances for the LED Backlight Systems with a Novel Lens-Cap,” Key Engineering Material, Vol. 364-366, pp. 132-137. (EI Journal, NSC 995-2622-E-009-014-CC3), Feb. 2009
158. Paul C.-P. Chao*, Lun-De Liao, Yi-Hua Fang, Chien-Yu Shen, Yung-Yuan Kao and Jeng-Sheng Huang, 2008, “Analytical Calculation of the Light Extraction Efficiency of Micro Cavities Light-emitting Diodes,” Key Engineering Material, Vol. 364-366, pp. 98-103. (EI Journal, NSC 94-2745-E-033-004-URD), Feb. 2009" href="/zh_tw/research/Journal_Papers/Paul-C-P-Chao-Lun-De-Liao-Yi-Hua-Fang-Chien-Yu-Shen-Yung-Yuan-Kao-and-Jeng-Sheng-Huang-2008-“Analytical-Calculation-of-the-Light-Extraction-Efficiency-of-Micro-Cavities-Light-emitting-Diodes-”-Key-Engineering-Material-Vol-364-366-pp-98-103-EI-Journal-NSC-94-2745-E-033-004-URD-88839008" target="_blank">Paul C.-P. Chao*, Lun-De Liao, Yi-Hua Fang, Chien-Yu Shen, Yung-Yuan Kao and Jeng-Sheng Huang, 2008, “Analytical Calculation of the Light Extraction Efficiency of Micro Cavities Light-emitting Diodes,” Key Engineering Material, Vol. 364-366, pp. 98-103. (EI Journal, NSC 94-2745-E-033-004-URD), Feb. 2009
159. Paul C.-P. Chao*, Chi-Wei Chiu and Kai-Teng Shih, 2008, “A Novel Low-Torque Ball Re-Positioning Scheme Based on a Sliding-mode Ball Observer for an Automatic Balancer System,” Shock and Vibration, vol. 15, no. 2, pp. 101-126. (SCI Journal, Impact Factor =0.173, NSC 94-2622-E-033-001 and NSC 94-2754-E-033-004), Feb. 2009" href="/zh_tw/research/Journal_Papers/Paul-C-P-Chao-Chi-Wei-Chiu-and-Kai-Teng-Shih-2008-“A-Novel-Low-Torque-Ball-Re-Positioning-Scheme-Based-on-a-Sliding-mode-Ball-Observer-for-an-Automatic-Balancer-System-”-Shock-and-Vibration-vol-15-no-2-pp-101-126-SCI-Journal-Impact-Factor-0-173-NSC-94-2622-E-033-001-and-NSC-94-2754-E-033-004-78386519" target="_blank">Paul C.-P. Chao*, Chi-Wei Chiu and Kai-Teng Shih, 2008, “A Novel Low-Torque Ball Re-Positioning Scheme Based on a Sliding-mode Ball Observer for an Automatic Balancer System,” Shock and Vibration, vol. 15, no. 2, pp. 101-126. (SCI Journal, Impact Factor =0.173, NSC 94-2622-E-033-001 and NSC 94-2754-E-033-004), Feb. 2009
160. Paul C.-P. Chao, J.-W. Hsueh, Y.-Y. Kao, C.-W. Chiu, Y.-C. Lin and T.-Y. Du, 2008, “Optomechatronic Design and Implementation of a Tunable LC Lens,” Invited Paper for Journal of Automation, Special Issue on Optomachatronics, Mar, 2008, pp. 24-30. (Local Chinese Journal), Feb. 2009" href="/zh_tw/research/Journal_Papers/Paul-C-P-Chao-J-W-Hsueh-Y-Y-Kao-C-W-Chiu-Y-C-Lin-and-T-Y-Du-2008-“Optomechatronic-Design-and-Implementation-of-a-Tunable-LC-Lens-”-Invited-Paper-for-Journal-of-Automation-Special-Issue-on-Optomachatronics-Mar-2008-pp-24-30-Local-Chinese-Journal-14538458" target="_blank">
161. Paul C.-P. Chao, J.-W. Hsueh, Y.-Y. Kao, C.-W. Chiu, Y.-C. Lin and T.-Y. Du, 2008, “Optomechatronic Design and Implementation of a Tunable LC Lens,” Invited Paper for Journal of Automation, Special Issue on Optomachatronics, Mar, 2008, pp. 24-30. (Local Chinese Journal), Feb. 2009
162. Chi-Wei Chiu, Paul C.-P. Chao*, Y.-Y. Kao and Fu-Kuan Young, 2008, “Optimal Design and Experimental Verification of Magnetically Actuated Optical Image Stabilization System for Cameras in Mobile Phones,” Journal of Applied Physics, Vol. 103, No. 7, 07F136-1-3. (SCI Journal, Impact Factor =2.316, 14/84, Physics, Applied), Feb. 2009" href="/zh_tw/research/Journal_Papers/Chi-Wei-Chiu-Paul-C-P-Chao-Y-Y-Kao-and-Fu-Kuan-Young-2008-“Optimal-Design-and-Experimental-Verification-of-Magnetically-Actuated-Optical-Image-Stabilization-System-for-Cameras-in-Mobile-Phones-”-Journal-of-Applied-Physics-Vol-103-No-7-07F136-1-3-SCI-Journal-Impact-Factor-2-316-14-84-Physics-Applied-90962490" target="_blank">Chi-Wei Chiu, Paul C.-P. Chao*, Y.-Y. Kao and Fu-Kuan Young, 2008, “Optimal Design and Experimental Verification of Magnetically Actuated Optical Image Stabilization System for Cameras in Mobile Phones,” Journal of Applied Physics, Vol. 103, No. 7, 07F136-1-3. (SCI Journal, Impact Factor =2.316, 14/84, Physics, Applied), Feb. 2009
163. Paul C.-P. Chao*, C.-Y. Shen, C.-W. Chiu, J.-S. Huang, Y.-Y. Kao, T.-Y. Tu, C.-L. Wang, H.-W. Lin, Solomon Chi and S.- Y. Tsai, 2008, “A Novel Lens Cap Designed for the RGB LEDs Installed in an Ultra-Thin and Directly Lit Backlight Unit of Large-Sized LCD TVs,” Journal of Society of Information Display, Vol. 16, No. 2, pp. 317-327. (SCIE Journal, 95-2745-E-033-004-URD), Feb. 2009" href="/zh_tw/research/Journal_Papers/Paul-C-P-Chao-C-Y-Shen-C-W-Chiu-J-S-Huang-Y-Y-Kao-T-Y-Tu-C-L-Wang-H-W-Lin-Solomon-Chi-and-S-Y-Tsai-2008-“A-Novel-Lens-Cap-Designed-for-the-RGB-LEDs-Installed-in-an-Ultra-Thin-and-Directly-Lit-Backlight-Unit-of-Large-Sized-LCD-TVs-”-Journal-of-Society-of-Information-Display-Vol-16-No-2-pp-317-327-SCIE-Journal-95-2745-E-033-004-URD-61903756" target="_blank">Paul C.-P. Chao*, C.-Y. Shen, C.-W. Chiu, J.-S. Huang, Y.-Y. Kao, T.-Y. Tu, C.-L. Wang, H.-W. Lin, Solomon Chi and S.- Y. Tsai, 2008, “A Novel Lens Cap Designed for the RGB LEDs Installed in an Ultra-Thin and Directly Lit Backlight Unit of Large-Sized LCD TVs,” Journal of Society of Information Display, Vol. 16, No. 2, pp. 317-327. (SCIE Journal, 95-2745-E-033-004-URD), Feb. 2009
164. Paul C.-P. Chao*, Chi-Wei Chiu, He-Kai Liang and Y.-Y. Kao, 2008, “Intelligent Actuation Strategy via Image Feedbacks for a Magnetically Actuated Autofocusing Module in Mobile Phones,” Journal of Applied Physics, Vol. 103, No. 7, 07F123-1-3. (SCI Journal, Impact Factor =2.316, 14/84, Physics, Applied), Feb. 2009" href="/zh_tw/research/Journal_Papers/Paul-C-P-Chao-Chi-Wei-Chiu-He-Kai-Liang-and-Y-Y-Kao-2008-“Intelligent-Actuation-Strategy-via-Image-Feedbacks-for-a-Magnetically-Actuated-Autofocusing-Module-in-Mobile-Phones-”-Journal-of-Applied-Physics-Vol-103-No-7-07F123-1-3-SCI-Journal-Impact-Factor-2-316-14-84-Physics-Applied-15873376" target="_blank">
165. Paul C.-P. Chao*, Chi-Wei Chiu, He-Kai Liang and Y.-Y. Kao, 2008, “Intelligent Actuation Strategy via Image Feedbacks for a Magnetically Actuated Autofocusing Module in Mobile Phones,” Journal of Applied Physics, Vol. 103, No. 7, 07F123-1-3. (SCI Journal, Impact Factor =2.316, 14/84, Physics, Applied), Feb. 2009
166. Paul C.-P. Chao*, C.-W. Chiu, T.-H. Liu, 2008, “DC dynamic pull-in predictions for a generalized clamped–clamped micro-beam based on a continuous model and bifurcation analysis,” Journal of Micromechanics and Micro-engineering, in press. (SCI Journal, Impact Factor =2.499, Ranking 4/110, Mechanics, NSC94-2212-E-033-010)., Feb. 2009" href="/zh_tw/research/Journal_Papers/ Paul-C-P-Chao-C-W-Chiu-T-H-Liu-2008-“DC-dynamic-pull-in-predictions-for-a-generalized-clamped–clamped-micro-beam-based-on-a-continuous-model-and-bifurcation-analysis-”-Journal-of-Micromechanics-and-Micro-engineering-in-press-SCI-Journal-Impact-Factor-2-499-Ranking-4-110-Mechanics-NSC94-2212-E-033-010-99467786" target="_blank"> Paul C.-P. Chao*, C.-W. Chiu, T.-H. Liu, 2008, “DC dynamic pull-in predictions for a generalized clamped–clamped micro-beam based on a continuous model and bifurcation analysis,” Journal of Micromechanics and Micro-engineering, in press. (SCI Journal, Impact Factor =2.499, Ranking 4/110, Mechanics, NSC94-2212-E-033-010)., Feb. 2009
167. Paul C.-P. Chao* and Chien-Yu Shen, 2008, “Sensorless Tilt Compensation for a Three-axis Optical Pickup Using a Sliding-mode Controller Equipped with a Sliding-mode Observer,” IEEE Transactions on Control System Technology, accepted. (SCI Journal, Impact Factor =1.211, NSC 94-2212-E-033-010 and NSC 94-2622-E-033-001-CC3), Feb. 2009
研討會論文
1. Yen-Ping Hsu, Paul C.-P. Chao, and Kuei-Yu Lee, “A New Prediction Model on the Luminance of OLEDs Subjected to Different Reverse Biases for Alleviating Degradation in AMOLED Displays,” The 2013 International Display Manufacturing Conference, held on August 27-30, 2013, Taipei, Taiwan., Nov. 2013
2. Yen-Lin Pan, Hung-Ming Tsai, Chen-Pang Kung, Heng-Yin Chen, and Paul C.-P. Chao*, and Jang-Lin Chen, “Numerical Modeling and Analysis of Flexible Projective Capacitive Touch Panel,” The 2013 International Display Manufacturing Conference, held on August 27-30, 2013, Taipei, Taiwan., Nov. 2013
3. Paul C.-P. Chao*, W. D. Chen and R. H. Wu, 2013, “A Battery Charge Controller for a Flyback Converter with Digital Primary Side Regulation,” The 23th Annual ASME Conference on Information Storage and Processing Systems, held on June 24-25, 2013 at the Santa Clara University in California, USA. (EI Publication), Nov. 2013
4. Paul C.-P. Chao*, Wei-Hsuan Hsu and C. H. Tsai, 2013, “A New Active 3D Optical Proximity Sensor Array and Its Readout Circuit,” The 23th Annual ASME Conference on Information Storage and Processing Systems, held on June 24-25, 2013 at the Santa Clara University in California, USA. (EI Publication), Nov. 2013
5. Paul C.-P. Chao*, Tse-Yi Tu, and Yung-Yuan Kao, 2013, “An LCL-Lens Array with Electrodes of Interlaced Structure in Applications of Auto-Stereoscopic Displays,” The 23th Annual ASME Conference on Information Storage and Processing Systems, held on June 24-25, 2013 at the Santa Clara University in California, USA. (EI Publication), Nov. 2013
6. Wei-Hsuan Hsu, Paul C.-P. Chao*, W. D. Chen and C. H. Tsai, 2013, “An On-line Digital Optical Bench Tester Based on Conscopy for Lens Quality Evaluation,” The 23th Annual ASME Conference on Information Storage and Processing Systems, held on June 24-25, 2013 at the Santa Clara University in California, USA. (EI Publication), Nov. 2013
7. Paul C.-P. Chao*, Jian-Ruei Chen, C. H. Tsai, and W. D. Chen, 2013, “Design and Realization of High Resolution (640x480) SWIR Image Acquisition,” The 23th Annual ASME Conference on
8. Information Storage and Processing Systems, held on June 24-25, 2013 at the Santa Clara University in California, USA. (EI Publication), Nov. 2013
9. Kuei-Yu Lee, Yen-Ping Hsu, and Paul C.-P. Chao*, 2012, “Sensing TFT Vth by an External Algorithm to Compensate Non-uniformity on AMOLED Panel,” 2012 IEEE Sensors Conference, Vol. 1-3, Taipei, Taiwan, Oct. 2011. (SCI Publication), Nov. 2013
10. Kuei-Yu Lee, Yen-Ping Hsu1, and Paul C.-P. Chao*, 2012, “Compensating OLED Degradation in an AMOLED Display Based on Measurements,” SID Digest, The Conference of Society of Information Display, 2012 in Boston, MA, USA, June 3 – 8, 2012. (EI Publication)., Nov. 2013
11. Bing-Ze Xue and Paul C.-P. Chao*, 2012, “A new bio-sensor in the structure of a micro machined clamped-clamped inertial beam and its readout circuit,” the ASME 2012 International Design Engineering Technical Conferences, held on August 12-15, 2012, Chicago, USA. (EI Publication), Nov. 2013
12. Kai-Teng Shih, Paul C.-P. Chao*, Yung-Yuan Kao, “Developing a Quality Assessment Method for Evaluating Focusing Quality of an LC lens used in an Optical Pickup,” 2012 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, July 11-14, Kaohsiung, Taiwan, 2012., Nov. 2013
13. Paul C.-P. Chao*, Wei-Dar Chen and Chih-Kuo Chang, 2012, “Maximum Power Tracking of a Generic Photovoltaic System via a Fuzzy Controller and a Two-Stage DC-DC Converter,” The 22th Annual ASME Conference on Information Storage and Processing Systems, held on June 18-20, 2012 at the Santa Clara University in California, USA. (EI Publication), Nov. 2013
14. Che-Hung Tsai and Paul C.-P. Chao*, 2012, “Optimal Design of ITO/organic Photonic Crystals in Polymer Light-emitting Diodes with Sidewall Reflectors for High Efficiency,” The 22th Annual
15. ASME Conference on Information Storage and Processing Systems, held on June 18-20, 2012 at the Santa Clara University in California, USA. (EI Publication), Nov. 2013
16. Tse-Yi Tu and Paul C.-P. Chao*, 2012, “A New Liquid Crystal Lens with Axis-Tunability via Three Sector Electrodes,” The 22th Annual ASME Conference on Information Storage and Processing Systems, held on June 18-20, 2012 at the Santa Clara University in California, USA. (EI Publication), Nov. 2013
17. T. C. Chan, C.-K. Sung and Paul C.-P. Chao, 2012, “Friction effect on ball positioning of an automatic balancer in optical disk drives,” The 22th Annual ASME Conference on Information Storage and Processing Systems, held on June 18-20, 2012 at the Santa Clara University in California, USA. (EI Publication), Nov. 2013
18. Paul C.-P. Chao* and Chun-Wei Chiu, 2012, “Design and Experimental Validation of a
19. Sliding-Mode Stabilizer for a Ship-Carried Satellite Antenna,” The 22th Annual ASME Conference on Information Storage and Processing Systems, held on June 18-20, 2012 at the Santa Clara University in California, USA. (EI Publication), Nov. 2013
20. Wan-Jun Lin, Paul C.-P. Chao * , Shir-Kuan Lin, Hsiao-Wen Zan, 2011, “A Novel Readout Circuit for an OTFD Gas Sensor with a New Front-end Trans-impedance Amplifier,” 2011 IEEE Sensors Conference, Vol. 1-3, Limerick, Ireland, Oct. 2011. (SCI Publication), Jun. 2013
21. Paul. C.-P. Chao * , Po-Hung Lu and Chun-Wei Chiu, 2011, “Dynamic modeling of a traveling-wave type ultrasonic motor with beam teeth via finite elements,” the ASME 2011 International Design Engineering Technical Conferences, held on August 29-31, 2011, Washington, DC, USA. (EI Publication), Jun. 2013
22. Paul C.-P. Chao*, Wei-Dar Chen and Chih-Kuo Chang, 2011, “Maximum Power Tracking of a Generic Photovoltaic System via a Fuzzy Controller and a Two-Stage DC-DC Converter,” The 21th Annual ASME Conference on Information Storage and Processing Systems, held on June 13-14, 2011 at the Santa Clara University in California. (EI Publication), Jun. 2013
23. T. C. Chan, C.-K. Sung and Paul C.-P. Chao “Friction effect on ball positioning of an automatic balancer in optical disk drives,” The 21th Annual ASME Conference on Information Storage and Processing Systems, held on June 13-14, 2011 at the Santa Clara University in California. (EI Publication), Jun. 2013
24. Che-Hung Tsai and Paul C.-P. Chao*, 2011 “Optimal Design of ITO/organic Photonic Crystals in Polymer Light-emitting Diodes with Sidewall Reflectors for High Efficiency,” The 21th Annual ASME Conference on Information Storage and Processing Systems, held on June 13-14, 2011 at the Santa Clara University in California. (EI Publication) , Jun. 2013
25. Paul C.-P. Chao* and Chun-Wei Chiu, 2011, “Design and Experimental Validation of a Sliding-Mode Stabilizer for a Ship-Carried Satellite Antenna,” The 21th Annual ASME Conference on Information Storage and Processing Systems, held on June 13-14, 2011 at the Santa Clara University in California. (EI Publication) , Jun. 2013
26. Chao-Jui Hsu and Paul C. -P. Chao, 2011, “A Negative Liquid-Crystal Lens with Multi-Ring Electrodes in Unequal Widths ,” SID Digest, 42 5, The Conference of Society of Information Display, 2011 in LA, CA, USA, May 15 – 20, 2011. (EI Publication). , Jun. 2013
27. Tse-Yi Tu and Paul C.-P. Chao*, 2011, “A New Liquid Crystal Lens with Axis-Tunability via Three Sector Electrodes,” The 21th Annual ASME Conference on Information Storage and Processing Systems, held on June 13-14, 2011 at the Santa Clara University in California. (EI Publication), Jun. 2013
28. Tzu-Fan Huang, Yung-Yuan Kao, and Paul C. -P. Chao, “Tracking Hand-gestures with Depth Detection for a 3D Interactive Display,” SID Digest, 42 1830, The Conference of Society of Information Display, 2011 in LA, CA, USA, May 15 – 20, 2011. (EI Publication)., Jun. 2013
29. Yung-Yuan Kao and Paul C. -P. Chao, “Sizing Multi-electrodes in an LCL-lens for Minimizing the Crosstalk in a 3D Auto-stereoscopic Display,” SID Digest, 42 13, The Conference of Society of Information Display, 2011 in LA, CA, USA, May 15 – 20, 2011. (EI Publication). , Jun. 2013
30. Kuei-Yu Lee, Jui-Hsin Chang, Paul C. -P. Chao, Chiu-Hao Chen, Zon-Tim Tsai, Hong-Shen Lin, Lee-Hsun Chang, and Yu-Sin Lin, “Realizing a New Pixel Circuit Design for Alleviating OLED Degradation in a 2.4 Inch AMOLED Panel,” SID Digest, 42 1173, The Conference of Society of Information Display, 2011 in LA, CA, USA, May 15 – 20, 2011. (EI Publication). , Jun. 2013
31. Yu-Han Chen, Paul C.-P. Chao, Che-Hung Tsai and Wei-Dar Chen, "Design and Development of a New Two-DOF Rotational Optical Image Stabilizer, "Proceedings of 2011 8th Asian Control Conference (ASCC), pp. 775-760, Kaohsiung, Taiwan, May 15-18, 2011., Jun. 2013
32. Tzu-Chia Huang, Fu-Ming Hsu, Paul C.-P. Chao*, 2011, “An Energy Harvesting System with a Novel Rectifier Charge Pump,” 2011 IEEE Sensors Conference, Vol. 1-3, Limerick, Ireland, Oct. 2011. (SCI Publication) , Jun. 2013
33. Bing-Ze Xue, Paul C.-P. Chao * , Bor-Shyh Lin , Chun-Yin Tsai, Tsung-Lin Chen, Hsin-Hao Liao, Hann-Huei Tsai, Ying-Zong Juang, 2011, “A Novel Gas Sensor in the Form of Micro-machined Resonator and its Readout Circui,” 2011 IEEE Sensors Conference, Vol. 1-3, Limerick, Ireland, Oct. 2011. (SCI Publication) , Jan. 2012
34. Paul C.-P. Chao J.-Y. Shen and J.-S. Huang, 2008, “Precision Positioning of a Three-axis Optical Pickup via a Double Phase-Lead Compensator Equipped with Auto-tuned Parameters,” The 17th Annual ASME Conference on Information Storage and Processing Systems, held on June 16-17, 2008 at the Santa Clara University in California. (EI Publication), Aug. 2011
35. Paul C.-P. Chao*, Lun-De Liao, Ming-Hsun Chung and Jeng-Sheng Hunag, 2008, “Robust Dual-stage and Repetitive Control Designs for an Optical Pickup with Parallel Cantilever Beams Powered by Piezo-Actuators,” The 17th Annual ASME Conference on Information Storage and Processing Systems, held on June 16-17, 2008 at the Santa Clara University in California. (EI Publication), Aug. 2011
36. Chun-Yin Tsai, Chi-Wei Chiu and Paul C.-P. Chao*, 2008, “Reliable hybrid fabrication processes for high sensitivity MEMS microphone,” The 34th International Conference on Micro and Nano Engineering, Hilton Athens, Greece, Sep. 15-18, 2008., Aug. 2011
37. Paul C.-P. Chao*, Lun-De Liao, Tsung-Shien Lu, Chien-Wei Liu and Chi-Wei Chiu, 2008, “Design and Fabrication of a Low-Stress Membrane for Microphones via Low Temperature Processes,” The 34th International Conference on Micro and Nano Engineering, Hilton Athens, Greece, Sep. 15-18, 2008., Aug. 2011
38. Lun-De Liao, Paul C.-P. Chao*, Chi-Wei Chiu, Yu-Jhu Lin, Shaou-Gang Miaou, Ming Chang and Jeng-Sheng Huang, 2008, “Precision Nano-machining in a Scanning Electron Microscope by Run-to-Run Control Based on Image Feedbacks,” The 34th International Conference on Micro and Nano Engineering, Hilton Athens, Greece, Sep. 15-18, 2008., Aug. 2011
39. T. C. Chan, C. K. Sung, Chang-Po Chao and Chun-Lung Huang, "A Study on the Performance of ABB Influenced by Rolling Friction," China Society for Mechanical Engineering 25th Conference, Taiwan, R.O.C., Nov. 22-23, 2008., Aug. 2011
40. Tse-Yi Tu , Paul C.-P. Chao*, Chi-Wei Chiu , Chun-Chieh Wang , Jeng-Sheng Huang, 2008, “Fuzzy Control Design of a Magnetically-Actuated Optical Image Stabilizer with Hystersis Compensation,” The 53th Magnetism and Magnetic Materials conference held in Austin, Texas on November 10-14, 2008. (EI Publication), Aug. 2011
41. Yung-Yuan Kao , Paul C.-P. Chao*, Chang-Chun Chang , Jeng-Sheng Huang, 2008, “Performance Prediction of a Small-sized Herringbone-grooved Bearing with Ferro-fluid Lubrication Considering Cavitation,” The 53th Magnetism and Magnetic Materials conference held in Austin, Texas on November 10-14, 2008. (EI Publication), Aug. 2011
42. Jiun-De Li, Lun-De Liao, Tse-yi Tu, Chi-Wei Chiu, Paul C.-P. Chao, 2009, “Optimize Placement Angles of RGB LEDs for Backlight Module by Genetic Algorithm,” International conference on Optics and Photonics in Taipei, Taiwan, Dec 5 – 6, 2008. (EI Publication), Aug. 2011
43. Yi-Ling Yang, Paul C.-P. Chao, C.-K. Sung, 2009, “Landing Posture Control via Trajectory Planning for a Generalized Twin-body System,” The 4th International Conference on Autonomous Robots and Agent, in Wellington, New Zealand, Feb 10 – 12., 2009. (EI Publication), Aug. 2011
44. Lun-De Liao, Paul C.-P. Chao, Yi-Shiun Luo, Hsin-Fei Meng, Chin-Teng Lin, 2009, “Achieving High Directionality and Extraction of Light Emission from Polymer Light Emit-ting Diodes via ITO/Organic Photonic Crystals,” SID Digest, The Conference of Society of Information Display, 2009 in San Antonio, Texas, USA, May 31 – June 5, 2009. (EI Publication), Aug. 2011
45. Yung-Yuan Kao, Yan-Pean Huang, Kai-Xian Yang and Paul C.-P. Chao, 2009, “An Auto-Stereoscopic 3D Display Using Tunable Liquid Crystal Lens Array that Mimics Effects of GRIN Lenticular Lens Array,” SID Digest, The Conference of Society of Information Display, 2009 in San Antonio, Texas, USA, May 31 – June 5, 2009. (EI Publication), Aug. 2011
46. Lun-De Liao, Paul C.-P. Chao, Jian-Ting Chen, Wei-Dar Chen, Wei-Hsuan Hsu, Chi-Wei Chiu and Chin-Teng Lin, 2009, “A Miniaturized Electromagnetic Generator with Planar Coils and Its Energy Harvest Circuit,” The Intermag Conference held in Sacramento, California, on May 4-8, 2009. (EI Publication), Aug. 2011
47. Tzu Chi Chan, C. K. Sung, Paul C.-P. Chao and Y. M. Hung, “Effects of rolling friction on Ball Positioning for an Automatic Ball Balancer,” The ASME 2009 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Oct. 30-Sep. 2, San Diego, CA, USA. (EI Publication), Aug. 2011
48. C. X. Lu, C. C. Wang, C. K. Sung and Paul C.-P. Chao, 2009, “Dynamic analysis of a motion transformer mimicking a hula hoop,” The ASME 2009 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Oct. 30-Sep. 2, San Diego, CA, USA. (EI Publication), Aug. 2011
49. Lun-De Liao, Wei-Huesh Hsu, Paul C.-P. Chao and Yan-Pean Huang, 2009, “Development of an On-line Digital Optical Bench Tester with Conoscopy for Lens Quality Evaluation,” 2009 JSME-IIP/ASME-ISPS Joint Conference on Micromechatronics for Information and Precision Equipment, June 17-20, 2009, Tsukuba International Congress Center, Ibaraki, Japan. (EI Publication), Aug. 2011 32. Prof SK Lin’s Conference paper, Aug. 2011
50. Lun-De Liao, Paul C.-P. Chao, Bor-Shyh Lin, Ming-Hsiu Chung, Arch W.-G. Sun, Shia-Chung Chen, Li-Wei Ko, Chin-Teng Lin, 2009, “A Novel Flexible and Zero-Preparation Dry EEG Injection Molding Sensor (DEIMS),” 2009 IEEE Sensors Conference, Christ Church, New Zealand, Oct. 2009. (EI Publication), Aug. 2011
51. Wei-Huesh Hsu and Paul C.-P. Chao, “An On-line Digital Optical Bench Tester for Evaluating Lens Quality,” The 14th North-East Asia Symposium on Nano, Information Technology and Reliability, Hsinchu, Taiwan, May 15, 2009., Aug. 2011
52. Lun-De Liao and Paul C.-P. Chao, “Run-to-Run Control Based on Image Feedbacks for Precision Micro-/Nano- machining in a Scanning Electron Microscope,” The 14th North-East Asia Symposium on Nano, Information Technology and Reliability, Hsinchu, Taiwan, May 15, 2009., Aug. 2011
53. Jian-Ting Chen and Paul C.-P. Chao, “A Micro-generator with Planar Coils and Its Energy Harvest Circuit,” The 14th North-East Asia Symposium on Nano, Information Technology and Reliability, Hsinchu, Taiwan, May 15, 2009., Aug. 2011
54. Chieh-Wen Hsueh and Paul C.-P. Chao, “Novel Hole and Ring Electrodes to Achieve High Focusing Power for a Large-aperture Liquid Crystal Lens,” The 14th North-East Asia Symposium on Nano, Information Technology and Reliability, Hsinchu, Taiwan, May 15, 2009., Aug. 2011
55. Chih-Kuo Chang and Paul C.-P. Chao, “Hybrid High Sensitivity MEMS Microphone Fabrication Processes,” The 14th North-East Asia Symposium on Nano, Information Technology and Reliability, Hsinchu, Taiwan, May 15, 2009., Aug. 2011
56. Paul C.-P. Chao, Nicholas Y.-Y. Kao, K.-X. Yang, Y.-P. Huang, “3D Display Technology by Means of 2D-muiltiplexed Method Based on Electric-controlled Liquid-crystal-lens Array,” The CPT-NCTU research results conference, Hsinchu, Taiwan, July, 2009., Aug. 2011
57. Che-Hung Tsai, Lun-De Liao, Paul C.-P. Chao, In-Chen Chen, Hsin-Fei Meng, Wei-Dar Chen, Shir-Kuan Lin and Chin-Teng Lin, “Optimal Design and Fabrication of ITO/Organic Photonic Crystals in Polymer Light Emitting Diodes using a Focused Ion Beam,” The 34th International Conference on Micro and Nano Engineering, Ghent, Belgium, Sep. 28-Oct. 1, 2009., Aug. 2011
58. Hsin-Yi Lai, You-Yin Chen, Lun-De Liao, Wei-Yi Chuang and Paul C.-P. Chao, 2009, “Design and Experimental Validations of a Novel Flexible Neural Probe for Deep Brain Stimulation and Recording,” The 34th International Conference on Micro and Nano Engineering, Ghent, Belgium, Sep. 28-Oct. 1, 2009., Aug. 2011
59. Y-Y. Chen, Y-J. Chang, P.C-P. Chao, S-W. Chen, K-C. Hung, P-Y. Zhou, K-M. Hung, Y-H. Kuo, M-Y. Tsai, TY. Pu, “Multi-electrode Arrays Chip Addressed by VCSEL Array System for Neural Recording,” The 34th International Conference on Micro and Nano Engineering, Ghent, Belgium, Sep. 28-Oct. 1, 2009., Aug. 2011
60. Lun-De Liao, Paul C.-P. Chao, Yu-Jhu Lin, Chi-Wei Chiu, Shaou-Gang Miaou, Ming Chang and Jeng-Sheng Huang, “Precision Micro-/Nano- machining in a Scanning Electron Microscope by Run-to-Run Control Based on Image Feedbacks,” Best Student Paper Award of the Conference, The 16th Symposium on Nano-Device Technology, Apr, 2009, Hsinchu, Taiwan., Aug. 2011
61. T. C. Chan, Cheng-Kuo Sung and Paul C.-P. Chao “Precision Ball Positioning of an Automatic Balancer System,” Best Paper Award of the Conference, The 12-th National Conference on Mechanism and Machine Theory, Nov., 2009, pp. 1-6, Chia-Yi, Taiwan., Aug. 2011
62. Lun-De Liao, Paul C.-P. Chao, Bor-Shyh Lin, Ming-Hsiu Chung, Arch W.-G. Sun, Shia-Chung Chen, Li-Wei Ko and Chin-Teng Lin, “A Novel Flexible and Zero-Preparation Dry EEG Injection Molding Sensor (DEIMS),” Biomedical Engineering Society 2009 Annual Symposium, Dec. 11-12, 2009, National Yang-Ming University, Taipei, Taiwan., Aug. 2011
63. Chi-Wei Chiu, Yu-Han Chen, Tzu-Fan Huang, Paul C.-P. Chao, 2010, “Robust and Optimal Design of a Novel Optical Image Stabilizer with the Capability of Suppressing Magnetic Torque Variations,” The 11th joint MMM-Intermag Conference, Jan 18-22, 2010, Washington DC, USA. (EI Publication), Aug. 2011
64. Wei-Yi Chuang and Paul C.-P. Chao, 2010, “Adjusting Electrode Potentials to Compensate Thermal/Tissue Effects in Deep Brain Stimulation via Finite Element Electromagnetic Analysis,” The 11th joint MMM-Intermag Conference, Jan 18-22, 2010, Washington DC, USA. (EI Publication), Aug. 2011
65. Lun-De Liao, Meng-Lin Lib, Hsin-Yi Lai, You-Yin Chen, Paul C.-P. Chao and Po-Hsun Wang, “In vivo functional photoacoustic micro-imaging of the electrically stimulated rat brain with multi-wavelengths,” the SPIE Symposium on SPIE BiOS: Biomedical Optics, Photons Plus Ultrasound: Imaging and Sensing 2010, 23-28 January 2010 at SPIE Photonics West in San Francisco, California, USA. (EI Publication), Aug. 2011
66. Lun-De Liao, Paul C.-P. Chao, Bor-Shyh Lin, Ming-Hsiu Chung, Arch W.-G. Sun, Shia-Chung Chen, Li-Wei Ko, Chin-Teng Lin, 2009, “A Novel Flexible and Zero-Preparation Dry EEG Injection Molding Sensor (DEIMS),” 2010 IEEE Sensors Conferences, Christ Church, New Zealand, Oct. 2009. (EI Publication), Aug. 2011
67. Lun-De Liao, Paul C.-P. Chao, Bor-Shyh Lin, Ming-Hsiu Chung, Arch W.-G. Sun, Shia-Chung Chen, Li-Wei Ko, Chin-Teng Lin, 2009, “A Novel Hybrid Bioelectrode Module for the Zero-Prep EEG Measurements,” 2009 IEEE Sensors Conference, Vol. 1-3, pp. 894-897, Christ Church, New Zealand, Oct. 2009. (SCI Publication), Aug. 2011
68. Paul C.-P. Chao, Chao-Jui Hsu and Yung-Yuan Kao, 2010, “A Thin Multi-Ring Negative Liquid Crystal Lens Enabled by High-κ Dielectric Material,” The 20th Annual ASME Conference on Information Storage and Processing Systems, held on June 14-15, 2010 at the Santa Clara University in California. (EI Publication), Aug. 2011
69. Yu-Han Chen, Paul C.-P. Chao*, Chi-Wei Chiu, Meng-Yen Tsai, Jyh-Yeong Chang and Shir-Kuan Lin, 2010, “A New Two-DOF Rotational Optical Image Stabilizer,” The 20th Annual ASME Conference on Information Storage and Processing Systems, held on June 14-15, 2010 at the Santa Clara University in California. (EI Publication, Best Paper Award), Aug. 2011
70. Paul C.-P. Chao*, C. I. Shao, C. X. Lu and C. K. Sung, 2010, “A New Energy Harvest System with a Hula-Hoop Transformer, Micro-generator and Interface Energy-Harvesting Circuit,” The 20th Annual ASME Conference on Information Storage and Processing Systems, held on June 14-15, 2010 at the Santa Clara University in California. (EI Publication), Aug. 2011
71. Paul C.-P. Chao*, Pen-Yen Liao and Meng-Yen Tsai, 2010, “Robust Control Design for Precision Positioning of a Generic Piezoelectric System with Consideration of Microscopic Hysteresis Effects,” The 20th Annual ASME Conference on Information Storage and Processing Systems, held on June 14-15, 2010 at the Santa Clara University in California. (EI Publication), Aug. 2011
72. Y. Y. Kao, C. W. Chiu, and Paul P. C. Chao, 2010, “A DFLC Lens with Ring-and-Pie Electrodes and a New Driving Scheme to Minimize Response Time,” Proceedings of The fifth Asia-Pacific Conference on Transducers and Micro-Nano Technology, in Perth, Australia, July 6 – 9, 2010., Aug. 2011
73. T. Y. Tu, C. W. Chiu, and Paul P. C. Chao, 2010, “Optical Design and Fabrication of the Tunable-axis Liquid Crystal Lens,” Proceedings of The fifth Asia-Pacific Conference on Transducers and Micro-Nano Technology, in Perth, Australia, July 6 – 9, 2010.., Aug. 2011
74. Kuei-Yu Lee, Jui-Hsin Chang, Paul C.-P. Chao and Fang-Chung Chen, 2010, “A new driving pixel circuit to alleviate AMOLED degradation,” SID Digest, The Conference of Society of Information Display, 2010 in Seattle, WA, USA, May 23 – 28, 2010. (EI Publication)., Aug. 2011
75. Yung-Yuan Kao, Paul C.-P. Chao and Yan-Pean Huang, "A LC Lenticular Lens Array with Staggered Electrodes for WXGA LCD in Applications of Auto-Stereoscopic 3D Display," The Micro-optics Conference 2010, Hsinchu, Taiwan, October 31 – Nov 3, 2010., Aug. 2011
76. Yu-Han Chen, Paul C.-P. Chao and Chi-Wei Chiu, "Optimal Design and Realization of a Novel Optical Image Stabilizer," The Micro-optics Conference 2010, Hsinchu, Taiwan, October 31 – Nov 3, 2010., Aug. 2011
77. Chao-Jui Hsu, Yung-Yuan Kao and Paul C.-P. Chao*, "An Liquid Crystal Negative Lens with Unequal Width Electrodes," The Micro-optics Conference 2010, Hsinchu, Taiwan, October 31 – Nov 3, 2010., Aug. 2011
78. Juan-Yao Ruan, Paul C.-P. Chao and Wei-Dar Chen, 2010, “A Multi-Touch Interface Circuit for a Large-Sized Capacitive Touch Panel,” 2010 IEEE Sensors Conference, Vol. 1-3, pp. 309-314, Waikoloa, Big Island, Hawaii, USA, Nov. 2010. (SCI Publication), Aug. 2011
79. Tzu-Yang Lin, Paul C.-P. Chao, Wei-Dar Chen, and Che-Hung Tsai, 2010, “A Novel 3D Optical Proximity Sensor Panel and its Readout Circuit,” 2010 IEEE Sensors Conference, Vol. 1-3, pp. 108-113, Waikoloa, Big Island, Hawaii, USA, Nov. 2010. (SCI Publication), Aug. 2011WY’s paper, Aug. 2011
80. Chun-Chieh Wang, Cheng-Kuo Sung, and Paul C. P. Chao, “Dynamic analysis of the optical disk derive system equipped with an automatic ball balancer with consideration of torsional motion,” ASME 2003 International Design Engineering Technical Conference, 19th Biennial conference on Mechanical Vibration and Noise, Sept., 2003, DETC2003/VIB48407, Chicago, USA. (EI Publication), Feb. 2009" href="/zh_tw/research/Conference_Papers/Chun-Chieh-Wang-Cheng-Kuo-Sung-and-Paul-C-P-Chao-“Dynamic-analysis-of-the-optical-disk-derive-system-equipped-with-an-automatic-ball-balancer-with-consideration-of-torsional-motion-”-ASME-2003-International-Design-Engineering-Technical-Conference-19th-Biennial-conference-on-Mechanical-Vibration-and-Noise-Sept-2003-DETC2003-VIB48407-Chicago-USA-EI-Publication-80995502" target="_blank">
81. Chun-Chieh Wang, Cheng-Kuo Sung, and Paul C. P. Chao, “Dynamic analysis of the optical disk derive system equipped with an automatic ball balancer with consideration of torsional motion,” ASME 2003 International Design Engineering Technical Conference, 19th Biennial conference on Mechanical Vibration and Noise, Sept., 2003, DETC2003/VIB48407, Chicago, USA. (EI Publication), Feb. 2009
82. Chun-Chieh Wang, Cheng-Kuo Sung, and Paul C. P. Chao, “Dynamic analysis of the optical disk derive system equipped with an automatic ball balancer with consideration of torsional motion,” ASME 2003 International Design Engineering Technical Conference, 19th Biennial conference on Mechanical Vibration and Noise, Sept., 2003, DETC2003/VIB48407, Chicago, USA. (EI Publication), Feb. 2009" href="/zh_tw/research/Conference_Papers/Chun-Chieh-Wang-Cheng-Kuo-Sung-and-Paul-C-P-Chao-“Dynamic-analysis-of-the-optical-disk-derive-system-equipped-with-an-automatic-ball-balancer-with-consideration-of-torsional-motion-”-ASME-2003-International-Design-Engineering-Technical-Conference-19th-Biennial-conference-on-Mechanical-Vibration-and-Noise-Sept-2003-DETC2003-VIB48407-Chicago-USA-EI-Publication-77930094" target="_blank">
83. Chun-Chieh Wang, Cheng-Kuo Sung, and Paul C. P. Chao, “Dynamic analysis of the optical disk derive system equipped with an automatic ball balancer with consideration of torsional motion,” ASME 2003 International Design Engineering Technical Conference, 19th Biennial conference on Mechanical Vibration and Noise, Sept., 2003, DETC2003/VIB48407, Chicago, USA. (EI Publication), Feb. 2009
84. Paul C. P. Chao, J. S. Huang and H. C. Tseng, “Dynamic Finite Element Analysis of a Piezoeletric Bimorph Beam Deflector with Consideration of Hysteresis Effect,” ASME 2003 International Design Engineering Technical Conference, 19th Biennial conference on Mechanical Vibration and Noise, Sept., 2003, DETC2003/VIB48528, Chicago, USA. (EI Publication), Feb. 2009" href="/zh_tw/research/Conference_Papers/Paul-C-P-Chao-J-S-Huang-and-H-C-Tseng-“Dynamic-Finite-Element-Analysis-of-a-Piezoeletric-Bimorph-Beam-Deflector-with-Consideration-of-Hysteresis-Effect-”-ASME-2003-International-Design-Engineering-Technical-Conference-19th-Biennial-conference-on-Mechanical-Vibration-and-Noise-Sept-2003-DETC2003-VIB48528-Chicago-USA-EI-Publication-42849806" target="_blank">
85. Paul C. P. Chao, J. S. Huang and H. C. Tseng, “Dynamic Finite Element Analysis of a Piezoeletric Bimorph Beam Deflector with Consideration of Hysteresis Effect,” ASME 2003 International Design Engineering Technical Conference, 19th Biennial conference on Mechanical Vibration and Noise, Sept., 2003, DETC2003/VIB48528, Chicago, USA. (EI Publication), Feb. 2009
86. Paul C. P. Chao, J. S. Huang and H. C. Tseng, “Dynamic Finite Element Analysis of a Piezoeletric Bimorph Beam Deflector with Consideration of Hysteresis Effect,” CSME 20-th National Conference of Mechanical Engineering, Dec., 2003, Taipei, Taiwan., Feb. 2009" href="/zh_tw/research/Conference_Papers/Paul-C-P-Chao-J-S-Huang-and-H-C-Tseng-“Dynamic-Finite-Element-Analysis-of-a-Piezoeletric-Bimorph-Beam-Deflector-with-Consideration-of-Hysteresis-Effect-”-CSME-20-th-National-Conference-of-Mechanical-Engineering-Dec-2003-Taipei-Taiwan-41552412" target="_blank">
87. Paul C. P. Chao, J. S. Huang and H. C. Tseng, “Dynamic Finite Element Analysis of a Piezoeletric Bimorph Beam Deflector with Consideration of Hysteresis Effect,” CSME 20-th National Conference of Mechanical Engineering, Dec., 2003, Taipei, Taiwan., Feb. 2009
88. Chun-Chieh Wang, Cheng-Kuo Sung, and Paul C. P. Chao, “Measurement system for the vibrations of an optical disc drive equipped with the automatic balancer system,” NIDAYS conference, March., 2003, pp. 1-7, Taipei, Taiwan., Feb. 2009" href="/zh_tw/research/Conference_Papers/Chun-Chieh-Wang-Cheng-Kuo-Sung-and-Paul-C-P-Chao-“Measurement-system-for-the-vibrations-of-an-optical-disc-drive-equipped-with-the-automatic-balancer-system-”-NIDAYS-conference-March-2003-pp-1-7-Taipei-Taiwan-59910633" target="_blank">Chun-Chieh Wang, Cheng-Kuo Sung, and Paul C. P. Chao, “Measurement system for the vibrations of an optical disc drive equipped with the automatic balancer system,” NIDAYS conference, March., 2003, pp. 1-7, Taipei, Taiwan., Feb. 2009
89. Ben-Cheng Yo, Cheng-Kuo Sung, and Paul C. P. Chao, “The effects of nonlinear suspension on the dynamic performance of the automatic ball balancer,” The 7-th National Conference on Mechanism and Machine Theory, Nov., 2004, pp. 1-6, Tainan, Taiwan., Feb. 2009" href="/zh_tw/research/Conference_Papers/Ben-Cheng-Yo-Cheng-Kuo-Sung-and-Paul-C-P-Chao-“The-effects-of-nonlinear-suspension-on-the-dynamic-performance-of-the-automatic-ball-balancer-”-The-7-th-National-Conference-on-Mechanism-and-Machine-Theory-Nov-2004-pp-1-6-Tainan-Taiwan-8944947" target="_blank">
90. Ben-Cheng Yo, Cheng-Kuo Sung, and Paul C. P. Chao, “The effects of nonlinear suspension on the dynamic performance of the automatic ball balancer,” The 7-th National Conference on Mechanism and Machine Theory, Nov., 2004, pp. 1-6, Tainan, Taiwan., Feb. 2009
91. Paul C.-P. Chao, Cheng-Kuo Sung, Hui-Chung Leu, and Chi-Wei Chiu, “The Dynamic Effect of Rolling Resistance of the Balancing Ball on the Performance of Automatic Ball Balancer,” Eleventh International Congress on Sound and Vibration (ICSV11), July, 2004, St. Pertersburg, Russia, pp.2711-2718., Feb. 2009" href="/zh_tw/research/Conference_Papers/Paul-C-P-Chao-Cheng-Kuo-Sung-Hui-Chung-Leu-and-Chi-Wei-Chiu-“The-Dynamic-Effect-of-Rolling-Resistance-of-the-Balancing-Ball-on-the-Performance-of-Automatic-Ball-Balancer-”-Eleventh-International-Congress-on-Sound-and-Vibration-ICSV11-July-2004-St-Pertersburg-Russia-pp-2711-2718-46554225" target="_blank">
92. Paul C.-P. Chao, Cheng-Kuo Sung, Hui-Chung Leu, and Chi-Wei Chiu, “The Dynamic Effect of Rolling Resistance of the Balancing Ball on the Performance of Automatic Ball Balancer,” Eleventh International Congress on Sound and Vibration (ICSV11), July, 2004, St. Pertersburg, Russia, pp.2711-2718., Feb. 2009
93. Paul C.-P. Chao, Cheng-Kuo Sung, Hui-Chung Leu, and Chi-Wei Chiu, “The Dynamic Effect of Rolling Resistance of the Balancing Ball on the Performance of Automatic Ball Balancer,” Eleventh International Congress on Sound and Vibration (ICSV11), July, 2004, St. Pertersburg, Russia, pp.2711-2718.
94. , Feb. 2009" href="/zh_tw/research/Conference_Papers/Paul-C-P-Chao-Cheng-Kuo-Sung-Hui-Chung-Leu-and-Chi-Wei-Chiu-“The-Dynamic-Effect-of-Rolling-Resistance-of-the-Balancing-Ball-on-the-Performance-of-Automatic-Ball-Balancer-”-Eleventh-International-Congress-on-Sound-and-Vibration-ICSV11-July-2004-St-Pertersburg-Russia-pp-2711-2718-63761590" target="_blank">
95. Paul C.-P. Chao, Cheng-Kuo Sung, Hui-Chung Leu, and Chi-Wei Chiu, “The Dynamic Effect of Rolling Resistance of the Balancing Ball on the Performance of Automatic Ball Balancer,” Eleventh International Congress on Sound and Vibration (ICSV11), July, 2004, St. Pertersburg, Russia, pp.2711-2718., Feb. 2009
96. Paul C.-P. Chao, Jeng-Sheng Huang and Po-Wen Liu, “Calculating Rotordynamic Coefficients of a Ferrofluid-Lubricated and Herringbone-Grooved Journal Bearing via Finite Difference Analysis.” ASME/STLE International Joint Tribology Conference, Oct. 2004, California, U. S. A., TRIB2004-64282. (EI Publication), Feb. 2009" href="/zh_tw/research/Conference_Papers/Paul-C-P-Chao-Jeng-Sheng-Huang-and-Po-Wen-Liu-“Calculating-Rotordynamic-Coefficients-of-a-Ferrofluid-Lubricated-and-Herringbone-Grooved-Journal-Bearing-via-Finite-Difference-Analysis-”-ASME-STLE-International-Joint-Tribology-Conference-Oct-2004-California-U-S-A-TRIB2004-64282-EI-Publication-54924793" target="_blank">
97. Paul C.-P. Chao, Jeng-Sheng Huang and Po-Wen Liu, “Calculating Rotordynamic Coefficients of a Ferrofluid-Lubricated and Herringbone-Grooved Journal Bearing via Finite Difference Analysis.” ASME/STLE International Joint Tribology Conference, Oct. 2004, California, U. S. A., TRIB2004-64282. (EI Publication), Feb. 2009
98. Paul C.-P. Chao, Cheng-Kuo Sung, Hui-Chung Leu and Chi-Wei Chiu, “Effects of Rolling Friction of the Balancing Balls on the Automatic Ball Balancer for Optical Disk Drives,” ASME/STLE International Joint Tribology Conference, Oct. 2004, California, U. S. A., TRIB2004-64275. (EI Publication) , Feb. 2009" href="/zh_tw/research/Conference_Papers/ Paul-C-P-Chao-Cheng-Kuo-Sung-Hui-Chung-Leu-and-Chi-Wei-Chiu-“Effects-of-Rolling-Friction-of-the-Balancing-Balls-on-the-Automatic-Ball-Balancer-for-Optical-Disk-Drives-”-ASME-STLE-International-Joint-Tribology-Conference-Oct-2004-California-U-S-A-TRIB2004-64275-EI-Publication-22112991" target="_blank"> Paul C.-P. Chao, Cheng-Kuo Sung, Hui-Chung Leu and Chi-Wei Chiu, “Effects of Rolling Friction of the Balancing Balls on the Automatic Ball Balancer for Optical Disk Drives,” ASME/STLE International Joint Tribology Conference, Oct. 2004, California, U. S. A., TRIB2004-64275. (EI Publication) , Feb. 2009
99. Ben-Cheng Yo, Cheng-Kuo Sung, and Paul C. P. Chao, “The effects of nonlinear suspension on the dynamic performance of the automatic ball balancer,” The 7-th National Conference on Mechanism and Machine Theory, Nov., 2004, pp. 1-6, Tainan, Taiwan., Feb. 2009" href="/zh_tw/research/Conference_Papers/Ben-Cheng-Yo-Cheng-Kuo-Sung-and-Paul-C-P-Chao-“The-effects-of-nonlinear-suspension-on-the-dynamic-performance-of-the-automatic-ball-balancer-”-The-7-th-National-Conference-on-Mechanism-and-Machine-Theory-Nov-2004-pp-1-6-Tainan-Taiwan-16033080" target="_blank">
100. Ben-Cheng Yo, Cheng-Kuo Sung, and Paul C. P. Chao, “The effects of nonlinear suspension on the dynamic performance of the automatic ball balancer,” The 7-th National Conference on Mechanism and Machine Theory, Nov., 2004, pp. 1-6, Tainan, Taiwan., Feb. 2009
101. Paul C.-P. Chao, Jeng-Sheng Huang, Chi-Wei Chiu and Chien-Yu Shen, “Design and experimental study of an observer-based controller for three-DOF four-wire-type optical pickup,” CSME 21-th National Conference of Mechanical Engineering, Dec., 2004, pp. 1353-1359, Taipei, Taiwan., Feb. 2009" href="/zh_tw/research/Conference_Papers/Paul-C-P-Chao-Jeng-Sheng-Huang-Chi-Wei-Chiu-and-Chien-Yu-Shen-“Design-and-experimental-study-of-an-observer-based-controller-for-three-DOF-four-wire-type-optical-pickup-”-CSME-21-th-National-Conference-of-Mechanical-Engineering-Dec-2004-pp-1353-1359-Taipei-Taiwan-18466365" target="_blank">
102. Paul C.-P. Chao, Jeng-Sheng Huang, Chi-Wei Chiu and Chien-Yu Shen, “Design and experimental study of an observer-based controller for three-DOF four-wire-type optical pickup,” CSME 21-th National Conference of Mechanical Engineering, Dec., 2004, pp. 1353-1359, Taipei, Taiwan., Feb. 2009
103. Jeng-Sheng Huang and Paul C.-P. Chao, Chi-Wei Chiu and J. Y. Wu-Chi, “Dynamic Formulation and Experimental Verification of a Piezo-Feeder,” The 28-th National Conference on Theoretical and Applied Mechanics, Dec., 2004, pp. 2136-2143, Taipei, Taiwan., Feb. 2009" href="/zh_tw/research/Conference_Papers/Jeng-Sheng-Huang-and-Paul-C-P-Chao-Chi-Wei-Chiu-and-J-Y-Wu-Chi-“Dynamic-Formulation-and-Experimental-Verification-of-a-Piezo-Feeder-”-The-28-th-National-Conference-on-Theoretical-and-Applied-Mechanics-Dec-2004-pp-2136-2143-Taipei-Taiwan- -33237639" target="_blank">Jeng-Sheng Huang and Paul C.-P. Chao, Chi-Wei Chiu and J. Y. Wu-Chi, “Dynamic Formulation and Experimental Verification of a Piezo-Feeder,” The 28-th National Conference on Theoretical and Applied Mechanics, Dec., 2004, pp. 2136-2143, Taipei, Taiwan., Feb. 2009
104. Paul C.-P. Chao, Jeng-Sheng Huang, Chi-Wei Chiu and Chien-Yu Shen, “Design and experimental study of an observer-based controller for three-DOF four-wire-type optical pickup,” in proc. of American Control Conference, 2005, Portland, Oregon, USA. (EI Publication), Feb. 2009" href="/zh_tw/research/Conference_Papers/ Paul-C-P-Chao-Jeng-Sheng-Huang-Chi-Wei-Chiu-and-Chien-Yu-Shen-“Design-and-experimental-study-of-an-observer-based-controller-for-three-DOF-four-wire-type-optical-pickup-”-in-proc-of-American-Control-Conference-2005-Portland-Oregon-USA-EI-Publication-61055410" target="_blank">
105. Paul C.-P. Chao, Jeng-Sheng Huang, Chi-Wei Chiu and Chien-Yu Shen, “Design and experimental study of an observer-based controller for three-DOF four-wire-type optical pickup,” in proc. of American Control Conference, 2005, Portland, Oregon, USA. (EI Publication), Feb. 2009
106. Paul C.-P. Chao, Jeng-Sheng Huang, Chi-Wei Chiu and J. Y. Wu-Chi, “Dynamic Modeling and Experimental Verification of a parallel-beam piezo-feeder,” in proc. of ASME 2005 International Design Engineering Technical Conference, 20th Biennial conference on Mechanical Vibration and Noise, Sept., 2005, Long Beach, CA, USA. (EI Publication), Feb. 2009" href="/zh_tw/research/Conference_Papers/Paul-C-P-Chao-Jeng-Sheng-Huang-Chi-Wei-Chiu-and-J-Y-Wu-Chi-“Dynamic-Modeling-and-Experimental-Verification-of-a-parallel-beam-piezo-feeder-”-in-proc-of-ASME-2005-International-Design-Engineering-Technical-Conference-20th-Biennial-conference-on-Mechanical-Vibration-and-Noise-Sept-2005-Long-Beach-CA-USA-EI-Publication-60532557" target="_blank">
107. Paul C.-P. Chao, Jeng-Sheng Huang, Chi-Wei Chiu and J. Y. Wu-Chi, “Dynamic Modeling and Experimental Verification of a parallel-beam piezo-feeder,” in proc. of ASME 2005 International Design Engineering Technical Conference, 20th Biennial conference on Mechanical Vibration and Noise, Sept., 2005, Long Beach, CA, USA. (EI Publication), Feb. 2009
108. Paul C.-P. Chao, Cheng-Kuo Sung and Ben-Cheng Yo, “Effects of nonlinear washers on the automatic ball balancer for optical disk drives,” in proc. of ASME 2005 International Design Engineering Technical Conference, 20th Biennial conference on Mechanical Vibration and Noise, Sept., 2005, Long Beach, CA, USA. (EI Publication), Feb. 2009" href="/zh_tw/research/Conference_Papers/Paul-C-P-Chao-Cheng-Kuo-Sung-and-Ben-Cheng-Yo-“Effects-of-nonlinear-washers-on-the-automatic-ball-balancer-for-optical-disk-drives-”-in-proc-of-ASME-2005-International-Design-Engineering-Technical-Conference-20th-Biennial-conference-on-Mechanical-Vibration-and-Noise-Sept-2005-Long-Beach-CA-USA-EI-Publication-73222852" target="_blank">Paul C.-P. Chao, Cheng-Kuo Sung and Ben-Cheng Yo, “Effects of nonlinear washers on the automatic ball balancer for optical disk drives,” in proc. of ASME 2005 International Design Engineering Technical Conference, 20th Biennial conference on Mechanical Vibration and Noise, Sept., 2005, Long Beach, CA, USA. (EI Publication), Feb. 2009
109. Paul C.-P. Chao and Chi-Wei Chiu, “Nonlinear dynamic analysis on the MEMS microphones,” in proc. of 2005 ASME International Mechanical Engineering Congress and Exposition, Nov.., 2005, Orlando, FL, USA. (EI Publication), Feb. 2009" href="/zh_tw/research/Conference_Papers/Paul-C-P-Chao-and-Chi-Wei-Chiu-“Nonlinear-dynamic-analysis-on-the-MEMS-microphones-”-in-proc-of-2005-ASME-International-Mechanical-Engineering-Congress-and-Exposition-Nov-2005-Orlando-FL-USA-EI-Publication-74080222" target="_blank">
110. Paul C.-P. Chao and Chi-Wei Chiu, “Nonlinear dynamic analysis on the MEMS microphones,” in proc. of 2005 ASME International Mechanical Engineering Congress and Exposition, Nov.., 2005, Orlando, FL, USA. (EI Publication), Feb. 2009
111. Paul C.-P. Chao* and Pen-Yen Liao, “A Novel Microscopic Modeling on Hysteresis Effects of Piezoelectric Structures with Assistance from Finite Elements,” in proc. of El-Naschie Symposium on Nonlinear Dynamics, December 20-21, 2005, Shanghai, China., Feb. 2009" href="/zh_tw/research/Conference_Papers/Paul-C-P-Chao-and-Pen-Yen-Liao-“A-Novel-Microscopic-Modeling-on-Hysteresis-Effects-of-Piezoelectric-Structures-with-Assistance-from-Finite-Elements-”-in-proc-of-El-Naschie-Symposium-on-Nonlinear-Dynamics-December-20-21-2005-Shanghai-China-70388804" target="_blank">
112. Paul C.-P. Chao* and Pen-Yen Liao, “A Novel Microscopic Modeling on Hysteresis Effects of Piezoelectric Structures with Assistance from Finite Elements,” in proc. of El-Naschie Symposium on Nonlinear Dynamics, December 20-21, 2005, Shanghai, China., Feb. 2009
113. Paul C.-P. Chao*, Ben-Cheng Yo and Cheng-Kuo Sung, “ Nonlinear Dynamic Effects of Damping Washers on the Performance of Automatic Ball Balancers in Optical Disc Drives,” in proc. of El-Naschie Symposium on Nonlinear Dynamics, December 20-21, 2005, Shanghai, China., Feb. 2009" href="/zh_tw/research/Conference_Papers/Paul-C-P-Chao-Ben-Cheng-Yo-and-Cheng-Kuo-Sung-“-Nonlinear-Dynamic-Effects-of-Damping-Washers-on-the-Performance-of-Automatic-Ball-Balancers-in-Optical-Disc-Drives-”-in-proc-of-El-Naschie-Symposium-on-Nonlinear-Dynamics-December-20-21-2005-Shanghai-China-58585283" target="_blank">
114. Paul C.-P. Chao*, Ben-Cheng Yo and Cheng-Kuo Sung, “ Nonlinear Dynamic Effects of Damping Washers on the Performance of Automatic Ball Balancers in Optical Disc Drives,” in proc. of El-Naschie Symposium on Nonlinear Dynamics, December 20-21, 2005, Shanghai, China., Feb. 2009
115. Jeng-Sheng Huang and Paul C.-P. Chao, Chi-Wei Chiu and J. Y. Wu-Chi, “Dynamic Formulation and Experimental Verification of a Piezo-Feeder,” The 29-th National Conference on Theoretical and Applied Mechanics, pp. M029-1-8, Dec., 2005, Hsinchu, Taiwan., Feb. 2009" href="/zh_tw/research/Conference_Papers/ Jeng-Sheng-Huang-and-Paul-C-P-Chao-Chi-Wei-Chiu-and-J-Y-Wu-Chi-“Dynamic-Formulation-and-Experimental-Verification-of-a-Piezo-Feeder-”-The-29-th-National-Conference-on-Theoretical-and-Applied-Mechanics-pp-M029-1-8-Dec-2005-Hsinchu-Taiwan-28169231" target="_blank">
116. Jeng-Sheng Huang and Paul C.-P. Chao, Chi-Wei Chiu and J. Y. Wu-Chi, “Dynamic Formulation and Experimental Verification of a Piezo-Feeder,” The 29-th National Conference on Theoretical and Applied Mechanics, pp. M029-1-8, Dec., 2005, Hsinchu, Taiwan., Feb. 2009
117. Paul C.-P. Chao* and Chi-Wei Chiu, “ Paul C.-P. Chao* and Pen-Yen Liao, “Experiment validation of an observer-based ball re-positioning scheme for an auto-balancer system of DVD-ROMs,” in proc. of The 25th IASTED international conference on modeling, identification and control, Feb, 2006, Spain. (EI Publication), Feb. 2009" href="/zh_tw/research/Conference_Papers/ Paul-C-P-Chao-and-Chi-Wei-Chiu-“-Paul-C-P-Chao-and-Pen-Yen-Liao-“Experiment-validation-of-an-observer-based-ball-re-positioning-scheme-for-an-auto-balancer-system-of-DVD-ROMs-”-in-proc-of-The-25th-IASTED-international-conference-on-modeling-identification-and-control-Feb-2006-Spain-EI-Publication-56663598" target="_blank">
118. Paul C.-P. Chao* and Chi-Wei Chiu, “ Paul C.-P. Chao* and Pen-Yen Liao, “Experiment validation of an observer-based ball re-positioning scheme for an auto-balancer system of DVD-ROMs,” in proc. of The 25th IASTED international conference on modeling, identification and control, Feb, 2006, Spain. (EI Publication), Feb. 2009
119. Paul C.-P. Chao, Lun-De Liao and Chi-Wei Chiu, 2006, “Design of a Novel LED Lens Cap and Optimization of LED Placement in a Large Area Direct Backlight for LCD-TVs,” in porc. of SPIE Europe conference Photonics in Multimedia, 3-7, April, 2006, Strasbourg, France, Proc. of SPIE, v 6196, Photonics in Multimedia, 2006, pp. 61960N. (EI Publication), Feb. 2009" href="/zh_tw/research/Conference_Papers/Paul-C-P-Chao-Lun-De-Liao-and-Chi-Wei-Chiu-2006-“Design-of-a-Novel-LED-Lens-Cap-and-Optimization-of-LED-Placement-in-a-Large-Area-Direct-Backlight-for-LCD-TVs-”-in-porc-of-SPIE-Europe-conference-Photonics-in-Multimedia-3-7-April-2006-Strasbourg-France-Proc-of-SPIE-v-6196-Photonics-in-Multimedia-2006-pp-61960N-EI-Publication-27200770" target="_blank">
120. Paul C.-P. Chao, Lun-De Liao and Chi-Wei Chiu, 2006, “Design of a Novel LED Lens Cap and Optimization of LED Placement in a Large Area Direct Backlight for LCD-TVs,” in porc. of SPIE Europe conference Photonics in Multimedia, 3-7, April, 2006, Strasbourg, France, Proc. of SPIE, v 6196, Photonics in Multimedia, 2006, pp. 61960N. (EI Publication), Feb. 2009
121. Lun-De Liao, Paul C.-P. Chao and Chi-Wei Chiu, 2006, “Design of a Novel LED Lens Cap and Optimization of LED Placement in a Large Area Direct Backlight for LCD-TVs,” in porc. of Taiwan Optics Conference, 9-10, Dec, 2006, Tainan, Taiwan., Feb. 2009" href="/zh_tw/research/Conference_Papers/Lun-De-Liao-Paul-C-P-Chao-and-Chi-Wei-Chiu-2006-“Design-of-a-Novel-LED-Lens-Cap-and-Optimization-of-LED-Placement-in-a-Large-Area-Direct-Backlight-for-LCD-TVs-”-in-porc-of-Taiwan-Optics-Conference-9-10-Dec-2006-Tainan-Taiwan-70563099" target="_blank">
122. Lun-De Liao, Paul C.-P. Chao and Chi-Wei Chiu, 2006, “Design of a Novel LED Lens Cap and Optimization of LED Placement in a Large Area Direct Backlight for LCD-TVs,” in porc. of Taiwan Optics Conference, 9-10, Dec, 2006, Tainan, Taiwan., Feb. 2009
123. Paul C. P. Chao and I.-T. Wang, “Modeling and Experimental Validation of a Micro-speaker with Corrugated Diaphragm for Mobile Phones,” the 2006 ASME/JSME Joint Conference on Micromechatronics for Information and Precision Equipment (MIPE 2006) held on June 21-23, 2006, at the Santa Clara University in California. (EI Publication), Feb. 2009" href="/zh_tw/research/Conference_Papers/Paul-C-P-Chao-and-I-T-Wang-“Modeling-and-Experimental-Validation-of-a-Micro-speaker-with-Corrugated-Diaphragm-for-Mobile-Phones-”-the-2006-ASME-JSME-Joint-Conference-on-Micromechatronics-for-Information-and-Precision-Equipment-MIPE-2006-held-on-June-21-23-2006-at-the-Santa-Clara-University-in-California-EI-Publication-48585097" target="_blank">
124. Paul C. P. Chao and I.-T. Wang, “Modeling and Experimental Validation of a Micro-speaker with Corrugated Diaphragm for Mobile Phones,” the 2006 ASME/JSME Joint Conference on Micromechatronics for Information and Precision Equipment (MIPE 2006) held on June 21-23, 2006, at the Santa Clara University in California. (EI Publication), Feb. 2009
125. Paul C.P. Chao*, Cheng-Kuo Sung and Szu-Tuo Wu, “Non-planar modeling and experimental validation of a spindle-disk system equipped with an automatic balancer system in optical disc drives,” the 2006 ASME/JSME Joint Conference on Micromechatronics for Information and Precision Equipment (MIPE 2006) held on June 21-23, 2006, at the Santa Clara University in California. (EI Publication), Feb. 2009" href="/zh_tw/research/Conference_Papers/Paul-C-P-Chao-Cheng-Kuo-Sung-and-Szu-Tuo-Wu-“Non-planar-modeling-and-experimental-validation-of-a-spindle-disk-system-equipped-with-an-automatic-balancer-system-in-optical-disc-drives-”-the-2006-ASME-JSME-Joint-Conference-on-Micromechatronics-for-Information-and-Precision-Equipment-MIPE-2006-held-on-June-21-23-2006-at-the-Santa-Clara-University-in-California-EI-Publication-68699157" target="_blank">Paul C.P. Chao*, Cheng-Kuo Sung and Szu-Tuo Wu, “Non-planar modeling and experimental validation of a spindle-disk system equipped with an automatic balancer system in optical disc drives,” the 2006 ASME/JSME Joint Conference on Micromechatronics for Information and Precision Equipment (MIPE 2006) held on June 21-23, 2006, at the Santa Clara University in California. (EI Publication), Feb. 2009
126. Paul C.P. Chao and Chi-Wei Chiu, “Development of a precision inspection machine for assuring the dynamic quality of the pick-ups used in optical disc drives,” the 2006 ASME/JSME Joint Conference on Micromechatronics for Information and Precision Equipment (MIPE 2006) to be held on June 21-23, 2006, at the Santa Clara University in California. (EI Publication), Feb. 2009" href="/zh_tw/research/Conference_Papers/ Paul-C-P-Chao-and-Chi-Wei-Chiu-“Development-of-a-precision-inspection-machine-for-assuring-the-dynamic-quality-of-the-pick-ups-used-in-optical-disc-drives-”-the-2006-ASME-JSME-Joint-Conference-on-Micromechatronics-for-Information-and-Precision-Equipment-MIPE-2006-to-be-held-on-June-21-23-2006-at-the-Santa-Clara-University-in-California-EI-Publication-8045978" target="_blank">
127. Paul C.P. Chao and Chi-Wei Chiu, “Development of a precision inspection machine for assuring the dynamic quality of the pick-ups used in optical disc drives,” the 2006 ASME/JSME Joint Conference on Micromechatronics for Information and Precision Equipment (MIPE 2006) to be held on June 21-23, 2006, at the Santa Clara University in California. (EI Publication), Feb. 2009
128. Paul C.P. Chao and Chi-Wei Chiu, “A novel precision inspection machine for assuring the dynamic quality of the pick-ups used in optical disc drives,” International Symposium on Precision Mechanical Measurements (ISPMM), 2006, SPIE Proceedings. (EI Publication), Feb. 2009" href="/zh_tw/research/Conference_Papers/Paul-C-P-Chao-and-Chi-Wei-Chiu-“A-novel-precision-inspection-machine-for-assuring-the-dynamic-quality-of-the-pick-ups-used-in-optical-disc-drives-”-International-Symposium-on-Precision-Mechanical-Measurements-ISPMM-2006-SPIE-Proceedings-EI-Publication-66914674" target="_blank">
129. Paul C.P. Chao and Chi-Wei Chiu, “A novel precision inspection machine for assuring the dynamic quality of the pick-ups used in optical disc drives,” International Symposium on Precision Mechanical Measurements (ISPMM), 2006, SPIE Proceedings. (EI Publication), Feb. 2009
130. Paul C.P. Chao and Ju-Ho Chen, 2006, “A novel microscopic inverse Preisach model embedded in finite elements used for precision positioning,” the 17th International Conference on Adaptive Structure Techniques, Taipei, Taiwan, R. O. C., Feb. 2009" href="/zh_tw/research/Conference_Papers/Paul-C-P-Chao-and-Ju-Ho-Chen-2006-“A-novel-microscopic-inverse-Preisach-model-embedded-in-finite-elements-used-for-precision-positioning-”-the-17th-International-Conference-on-Adaptive-Structure-Techniques-Taipei-Taiwan-R-O-C-4630847" target="_blank">Paul C.P. Chao and Ju-Ho Chen, 2006, “A novel microscopic inverse Preisach model embedded in finite elements used for precision positioning,” the 17th International Conference on Adaptive Structure Techniques, Taipei, Taiwan, R. O. C., Feb. 2009
131. Chi-Wei Chiu and Paul C.-P. Chao, 2006, “A Novel Method to Predict the Pull-in Voltage in a Closed Form for Deformed Micro-plates Actuated by a Distributed Electrostatic Force,” The 30-th National Conference on Theoretical and Applied Mechanics, Dec., 2006, pp. 2136-2143, December 15-16, 2006, DYU, Changhwa, Taiwan, R.O.C., Feb. 2009" href="/zh_tw/research/Conference_Papers/Chi-Wei-Chiu-and-Paul-C-P-Chao-2006-“A-Novel-Method-to-Predict-the-Pull-in-Voltage-in-a-Closed-Form-for-Deformed-Micro-plates-Actuated-by-a-Distributed-Electrostatic-Force-”-The-30-th-National-Conference-on-Theoretical-and-Applied-Mechanics-Dec-2006-pp-2136-2143-December-15-16-2006-DYU-Changhwa-Taiwan-R-O-C-2064443" target="_blank">
132. Chi-Wei Chiu and Paul C.-P. Chao, 2006, “A Novel Method to Predict the Pull-in Voltage in a Closed Form for Deformed Micro-plates Actuated by a Distributed Electrostatic Force,” The 30-th National Conference on Theoretical and Applied Mechanics, Dec., 2006, pp. 2136-2143, December 15-16, 2006, DYU, Changhwa, Taiwan, R.O.C., Feb. 2009
133. Paul C.P. Chao and Sung-Ching Wu, 2007, “Optimal Design of Magnetic Zooming Mechanism Used in Cameras of Mobile Phones via Genetic Algorithm,” The 10th Joint MMM/Intermag Conference in Baltimore, Maryland on January 7-11, 2007. (EI Publication), Feb. 2009" href="/zh_tw/research/Conference_Papers/Paul-C-P-Chao-and-Sung-Ching-Wu-2007-“Optimal-Design-of-Magnetic-Zooming-Mechanism-Used-in-Cameras-of-Mobile-Phones-via-Genetic-Algorithm-”-The-10th-Joint-MMM-Intermag-Conference-in-Baltimore-Maryland-on-January-7-11-2007-EI-Publication-44111339" target="_blank">
134. Paul C.P. Chao and Sung-Ching Wu, 2007, “Optimal Design of Magnetic Zooming Mechanism Used in Cameras of Mobile Phones via Genetic Algorithm,” The 10th Joint MMM/Intermag Conference in Baltimore, Maryland on January 7-11, 2007. (EI Publication), Feb. 2009
135. Paul C.-P. Chao and Yuan Hsu-Pang, 2007, “Magneto-Electro-Dynamical Modeling and Design of a Micro-Speaker Used for Mobile Phones with Considerations of Diaphragm Corrugation and Air Closures,” The 10th Joint MMM/Intermag Conference, Baltimore, Maryland on January 7-11, 2007. (EI Publication), Feb. 2009" href="/zh_tw/research/Conference_Papers/Paul-C-P-Chao-and-Yuan-Hsu-Pang-2007-“Magneto-Electro-Dynamical-Modeling-and-Design-of-a-Micro-Speaker-Used-for-Mobile-Phones-with-Considerations-of-Diaphragm-Corrugation-and-Air-Closures-”-The-10th-Joint-MMM-Intermag-Conference-Baltimore-Maryland-on-January-7-11-2007-EI-Publication-68339619" target="_blank">
136. Paul C.-P. Chao and Yuan Hsu-Pang, 2007, “Magneto-Electro-Dynamical Modeling and Design of a Micro-Speaker Used for Mobile Phones with Considerations of Diaphragm Corrugation and Air Closures,” The 10th Joint MMM/Intermag Conference, Baltimore, Maryland on January 7-11, 2007. (EI Publication), Feb. 2009
137. Chi-Wei Chiu, Paul C.-P. Chao, and Din-Yuan Wu, 2007, “Optimal Design of Magnetic Actuated Optical Image Stabilization Mechanism for Cameras in Mobile Phones via Genetic Algorithm,” The 10th Joint MMM/Intermag Conference to be held in Baltimore, Maryland on January 7-11, 2007. (EI Publication), Feb. 2009" href="/zh_tw/research/Conference_Papers/Chi-Wei-Chiu-Paul-C-P-Chao-and-Din-Yuan-Wu-2007-“Optimal-Design-of-Magnetic-Actuated-Optical-Image-Stabilization-Mechanism-for-Cameras-in-Mobile-Phones-via-Genetic-Algorithm-”-The-10th-Joint-MMM-Intermag-Conference-to-be-held-in-Baltimore-Maryland-on-January-7-11-2007-EI-Publication-91479212" target="_blank">
138. Chi-Wei Chiu, Paul C.-P. Chao, and Din-Yuan Wu, 2007, “Optimal Design of Magnetic Actuated Optical Image Stabilization Mechanism for Cameras in Mobile Phones via Genetic Algorithm,” The 10th Joint MMM/Intermag Conference to be held in Baltimore, Maryland on January 7-11, 2007. (EI Publication), Feb. 2009
139. Paul C.-P. Chao, Lun-De Liao, Chi-Wei Chiu, 2007, “Electromagnetic Numerical Characterization of the Liquid Crystal Lens Using Finite-Difference Time Domain Method,” Asian Pacific Conference on Optics Manufacture, January, 2007, Hong Kong, China., Feb. 2009" href="/zh_tw/research/Conference_Papers/Paul-C-P-Chao-Lun-De-Liao-Chi-Wei-Chiu-2007-“Electromagnetic-Numerical-Characterization-of-the-Liquid-Crystal-Lens-Using-Finite-Difference-Time-Domain-Method-”-Asian-Pacific-Conference-on-Optics-Manufacture-January-2007-Hong-Kong-China-499605" target="_blank">
140. Paul C.-P. Chao, Lun-De Liao, Chi-Wei Chiu, 2007, “Electromagnetic Numerical Characterization of the Liquid Crystal Lens Using Finite-Difference Time Domain Method,” Asian Pacific Conference on Optics Manufacture, January, 2007, Hong Kong, China., Feb. 2009
141. Chi-Wei Chiu, Chien-Yu Shen and Paul C.-P. Chao, Jan, 2007, “Novel Lens Design and Experimental Verification for High Efficiency Direct Type Backlight Module of LCD-TV,” Asian Pacific Conference on Optics Manufacture, January, 2007, Hong Kong, China., Feb. 2009" href="/zh_tw/research/Conference_Papers/Chi-Wei-Chiu-Chien-Yu-Shen-and-Paul-C-P-Chao-Jan-2007-“Novel-Lens-Design-and-Experimental-Verification-for-High-Efficiency-Direct-Type-Backlight-Module-of-LCD-TV-”-Asian-Pacific-Conference-on-Optics-Manufacture-January-2007-Hong-Kong-China-77272851" target="_blank">Chi-Wei Chiu, Chien-Yu Shen and Paul C.-P. Chao, Jan, 2007, “Novel Lens Design and Experimental Verification for High Efficiency Direct Type Backlight Module of LCD-TV,” Asian Pacific Conference on Optics Manufacture, January, 2007, Hong Kong, China., Feb. 2009
142. Paul C.-P. Chao, Lun-De Liao, Chi-Wei Chiu, Jan, 2007, “Electromagnetic Numerical Characterization of the Liquid Crystal Lens Using Finite-Difference Time Domain Method,” Asian Pacific Conference on Optics Manufacture, January, 2007, Hong Kong, China., Feb. 2009" href="/zh_tw/research/Conference_Papers/Paul-C-P-Chao-Lun-De-Liao-Chi-Wei-Chiu-Jan-2007-“Electromagnetic-Numerical-Characterization-of-the-Liquid-Crystal-Lens-Using-Finite-Difference-Time-Domain-Method-”-Asian-Pacific-Conference-on-Optics-Manufacture-January-2007-Hong-Kong-China- -74061858" target="_blank">Paul C.-P. Chao, Lun-De Liao, Chi-Wei Chiu, Jan, 2007, “Electromagnetic Numerical Characterization of the Liquid Crystal Lens Using Finite-Difference Time Domain Method,” Asian Pacific Conference on Optics Manufacture, January, 2007, Hong Kong, China., Feb. 2009
143. Chi-Wei Chiu, Chien-Yu Shen and Paul C.-P. Chao, “Novel Lens Design and Experimental Verification for High Efficiency Direct Type Backlight Module of LCD-TV,” The 1st International Conference on Display for LEDs, Jan, 2007, Seoul, Korea., Feb. 2009" href="/zh_tw/research/Conference_Papers/Chi-Wei-Chiu-Chien-Yu-Shen-and-Paul-C-P-Chao-“Novel-Lens-Design-and-Experimental-Verification-for-High-Efficiency-Direct-Type-Backlight-Module-of-LCD-TV-”-The-1st-International-Conference-on-Display-for-LEDs-Jan-2007-Seoul-Korea-15967826" target="_blank">Chi-Wei Chiu, Chien-Yu Shen and Paul C.-P. Chao, “Novel Lens Design and Experimental Verification for High Efficiency Direct Type Backlight Module of LCD-TV,” The 1st International Conference on Display for LEDs, Jan, 2007, Seoul, Korea., Feb. 2009
144. C.-W. Chiu, Paul C.-P. Chao and J.-Y. Shen, 2007, “Deign and Construction of an In-situ Inspection Machine for Ensuring the Dynamic Performance of Fluid Bearings in Data Storage Devices,” The 17th Annual ASME Conference on Information Storage and Processing Systems, held on June 18-19, 2007 at the Santa Clara University in California. (EI Publication), Feb. 2009" href="/zh_tw/research/Conference_Papers/ C-W-Chiu-Paul-C-P-Chao-and-J-Y-Shen-2007-“Deign-and-Construction-of-an-In-situ-Inspection-Machine-for-Ensuring-the-Dynamic-Performance-of-Fluid-Bearings-in-Data-Storage-Devices-”-The-17th-Annual-ASME-Conference-on-Information-Storage-and-Processing-Systems-held-on-June-18-19-2007-at-the-Santa-Clara-University-in-California-EI-Publication-99188105" target="_blank">
145. C.-W. Chiu, Paul C.-P. Chao and J.-Y. Shen, 2007, “Deign and Construction of an In-situ Inspection Machine for Ensuring the Dynamic Performance of Fluid Bearings in Data Storage Devices,” The 17th Annual ASME Conference on Information Storage and Processing Systems, held on June 18-19, 2007 at the Santa Clara University in California. (EI Publication), Feb. 2009
146. Paul C.-P. Chao J.-Y. Shen and J.-S. Huang, 2007, “Deign and Experimental Verification of a Controller with Auto-Tuned Parameters for Precision Positioning of a Three-axis Optical Pickup,” The 17th Annual ASME Conference on Information Storage and Processing Systems, held on June 18-19, 2007 at the Santa Clara University in California. (EI Publication), Feb. 2009" href="/zh_tw/research/Conference_Papers/Paul-C-P-Chao-J-Y-Shen-and-J-S-Huang-2007-“Deign-and-Experimental-Verification-of-a-Controller-with-Auto-Tuned-Parameters-for-Precision-Positioning-of-a-Three-axis-Optical-Pickup-”-The-17th-Annual-ASME-Conference-on-Information-Storage-and-Processing-Systems-held-on-June-18-19-2007-at-the-Santa-Clara-University-in-California-EI-Publication-87214654" target="_blank">
147. Paul C.-P. Chao J.-Y. Shen and J.-S. Huang, 2007, “Deign and Experimental Verification of a Controller with Auto-Tuned Parameters for Precision Positioning of a Three-axis Optical Pickup,” The 17th Annual ASME Conference on Information Storage and Processing Systems, held on June 18-19, 2007 at the Santa Clara University in California. (EI Publication), Feb. 2009
148. Paul C.-P. Chao*, Lun-De Liao, Ming-Hsun Chung and Jeng-Sheng Hunag, 2007, “Precision Positioning and Experimental Verification of a Parallel Piezo-Beam Lens Holder for Fine Track-Following in a Dual-Stage Actuator for Data Storage Devices,” The 17th Annual ASME Conference on Information Storage and Processing Systems, held on June 18-19, 2007 at the Santa Clara University in California. (EI Publication), Feb. 2009" href="/zh_tw/research/Conference_Papers/Paul-C-P-Chao-Lun-De-Liao-Ming-Hsun-Chung-and-Jeng-Sheng-Hunag-2007-“Precision-Positioning-and-Experimental-Verification-of-a-Parallel-Piezo-Beam-Lens-Holder-for-Fine-Track-Following-in-a-Dual-Stage-Actuator-for-Data-Storage-Devices-”-The-17th-Annual-ASME-Conference-on-Information-Storage-and-Processing-Systems-held-on-June-18-19-2007-at-the-Santa-Clara-University-in-California-EI-Publication-18202014" target="_blank">
149. Paul C.-P. Chao*, Lun-De Liao, Ming-Hsun Chung and Jeng-Sheng Hunag, 2007, “Precision Positioning and Experimental Verification of a Parallel Piezo-Beam Lens Holder for Fine Track-Following in a Dual-Stage Actuator for Data Storage Devices,” The 17th Annual ASME Conference on Information Storage and Processing Systems, held on June 18-19, 2007 at the Santa Clara University in California. (EI Publication), Feb. 2009
150. C. C. Wang, C. K. Sung and Paul C.-P. Chao, “Dynamic Analysis on a Hula Hoop Functioning as a Motion Transformer,” 12th IFToMM World Congress, Besançon (France), June18-21, 2007. (EI Publication), Feb. 2009" href="/zh_tw/research/Conference_Papers/C-C-Wang-C-K-Sung-and-Paul-C-P-Chao-“Dynamic-Analysis-on-a-Hula-Hoop-Functioning-as-a-Motion-Transformer-”-12th-IFToMM-World-Congress-Besançon-France-June18-21-2007-EI-Publication-29862460" target="_blank">
151. C. C. Wang, C. K. Sung and Paul C.-P. Chao, “Dynamic Analysis on a Hula Hoop Functioning as a Motion Transformer,” 12th IFToMM World Congress, Besançon (France), June18-21, 2007. (EI Publication), Feb. 2009
152. Cheng-Kuo Sung and Paul C.-P. Chao, “Impulsive responses of a hula hoop,” The Fourteenth International Congress on Sound and Vibration (ICSV14), July 9-12, 2007, Cairns, Australia., Feb. 2009" href="/zh_tw/research/Conference_Papers/Cheng-Kuo-Sung-and-Paul-C-P-Chao-“Impulsive-responses-of-a-hula-hoop-”-The-Fourteenth-International-Congress-on-Sound-and-Vibration-ICSV14-July-9-12-2007-Cairns-Australia-72726438" target="_blank">
153. Cheng-Kuo Sung and Paul C.-P. Chao, “Impulsive responses of a hula hoop,” The Fourteenth International Congress on Sound and Vibration (ICSV14), July 9-12, 2007, Cairns, Australia., Feb. 2009
154. Yi-Ling Yang, Paul C.-P. Chao, Cheng-Kuo Sung, “Landing Posture Control of a Generalized Twin-body System via Methods of Input-output Linearization and Computed Torque,” ASME 2007 International Design Engineering Technical Conference, Sep. 4-7, 2007, Las Vegas, Nevada, USA. (EI Publication), Feb. 2009" href="/zh_tw/research/Conference_Papers/Yi-Ling-Yang-Paul-C-P-Chao-Cheng-Kuo-Sung-“Landing-Posture-Control-of-a-Generalized-Twin-body-System-via-Methods-of-Input-output-Linearization-and-Computed-Torque-”-ASME-2007-International-Design-Engineering-Technical-Conference-Sep-4-7-2007-Las-Vegas-Nevada-USA-EI-Publication-21770734" target="_blank">
155. Yi-Ling Yang, Paul C.-P. Chao, Cheng-Kuo Sung, “Landing Posture Control of a Generalized Twin-body System via Methods of Input-output Linearization and Computed Torque,” ASME 2007 International Design Engineering Technical Conference, Sep. 4-7, 2007, Las Vegas, Nevada, USA. (EI Publication), Feb. 2009
156. Lun-De. Liao, Paul C.-P. Chao and Chi-Wei. Chiu, “Optimal Design of the Photonic Crystal Fiber by means of the Genetic Algorithm and Three-Dimensional Finite-Difference Time-Domain Methods ,” The 14h International Display Workshops, December 5-7, 2007, Sapporo Convention Center, Sapporo, Japan., Feb. 2009" href="/zh_tw/research/Conference_Papers/ Lun-De-Liao-Paul-C-P-Chao-and-Chi-Wei-Chiu-“Optimal-Design-of-the-Photonic-Crystal-Fiber-by-means-of-the-Genetic-Algorithm-and-Three-Dimensional-Finite-Difference-Time-Domain-Methods-”-The-14h-International-Display-Workshops-December-5-7-2007-Sapporo-Convention-Center-Sapporo-Japan-48629239" target="_blank">
157. Lun-De. Liao, Paul C.-P. Chao and Chi-Wei. Chiu, “Optimal Design of the Photonic Crystal Fiber by means of the Genetic Algorithm and Three-Dimensional Finite-Difference Time-Domain Methods ,” The 14h International Display Workshops, December 5-7, 2007, Sapporo Convention Center, Sapporo, Japan., Feb. 2009
158. Paul C.-P. Chao, Rong-Jhe Chen, Lun-De Liao, Chi-Wei Chiu, “A Novel Design of Micro-Lens Array on Liquid Crystal Displays for the Backlight Efficiency Enhancement,” The 14h International Display Workshops, December 5-7, 2007, Sapporo Convention Center, Sapporo, Japan., Feb. 2009" href="/zh_tw/research/Conference_Papers/Paul-C-P-Chao-Rong-Jhe-Chen-Lun-De-Liao-Chi-Wei-Chiu-“A-Novel-Design-of-Micro-Lens-Array-on-Liquid-Crystal-Displays-for-the-Backlight-Efficiency-Enhancement-”-The-14h-International-Display-Workshops-December-5-7-2007-Sapporo-Convention-Center-Sapporo-Japan-90607739" target="_blank">
159. Paul C.-P. Chao, Rong-Jhe Chen, Lun-De Liao, Chi-Wei Chiu, “A Novel Design of Micro-Lens Array on Liquid Crystal Displays for the Backlight Efficiency Enhancement,” The 14h International Display Workshops, December 5-7, 2007, Sapporo Convention Center, Sapporo, Japan., Feb. 2009
160. C.-Y. Shen, C.-W. Chiu, C.-P. Chao, J.-S. Huang, H.-W. Lin, “Novel Lens Design for Ultra-Thin, High Efficiency of Light Utilization, Direct Type RGB LED Backlight Module,” The 14h International Display Workshops, December 5-7, 2007, Sapporo Convention Center, Sapporo, Japan., Feb. 2009" href="/zh_tw/research/Conference_Papers/C-Y-Shen-C-W-Chiu-C-P-Chao-J-S-Huang-H-W-Lin-“Novel-Lens-Design-for-Ultra-Thin-High-Efficiency-of-Light-Utilization-Direct-Type-RGB-LED-Backlight-Module-”-The-14h-International-Display-Workshops-December-5-7-2007-Sapporo-Convention-Center-Sapporo-Japan-45049472" target="_blank">
161. C.-Y. Shen, C.-W. Chiu, C.-P. Chao, J.-S. Huang, H.-W. Lin, “Novel Lens Design for Ultra-Thin, High Efficiency of Light Utilization, Direct Type RGB LED Backlight Module,” The 14h International Display Workshops, December 5-7, 2007, Sapporo Convention Center, Sapporo, Japan., Feb. 2009
162. Paul C.-P. Chao, Chi-Wei Chiu and He-Kai Liang, 2007, “Design and Actuation Strategy of a Magnetically-Actuated Auto-Focusing Module for Mobile Phones,” The 52th Magnetism and Magnetic Materials conference to be held in Tempa, Florida on November 5-9, 2007. (EI Publication), Feb. 2009" href="/zh_tw/research/Conference_Papers/Paul-C-P-Chao-Chi-Wei-Chiu-and-He-Kai-Liang-2007-“Design-and-Actuation-Strategy-of-a-Magnetically-Actuated-Auto-Focusing-Module-for-Mobile-Phones-”-The-52th-Magnetism-and-Magnetic-Materials-conference-to-be-held-in-Tempa-Florida-on-November-5-9-2007-EI-Publication-92565602" target="_blank">
163. Paul C.-P. Chao, Chi-Wei Chiu and He-Kai Liang, 2007, “Design and Actuation Strategy of a Magnetically-Actuated Auto-Focusing Module for Mobile Phones,” The 52th Magnetism and Magnetic Materials conference to be held in Tempa, Florida on November 5-9, 2007. (EI Publication), Feb. 2009
164. Chi-Wei Chiu, Paul C.-P. Chao and Fu-Kuan Young, 2007 “Optimal Design and Experimental Verification of Magnetic Actuated Optical Image Stabilization System for Camera Phone,” The 10th Joint MMM/Intermag Conference to be held in Tempa, Florida on November 5-9, 2007. (EI Publication), Feb. 2009" href="/zh_tw/research/Conference_Papers/Chi-Wei-Chiu-Paul-C-P-Chao-and-Fu-Kuan-Young-2007-“Optimal-Design-and-Experimental-Verification-of-Magnetic-Actuated-Optical-Image-Stabilization-System-for-Camera-Phone-”-The-10th-Joint-MMM-Intermag-Conference-to-be-held-in-Tempa-Florida-on-November-5-9-2007-EI-Publication-91508132" target="_blank">
165. Chi-Wei Chiu, Paul C.-P. Chao and Fu-Kuan Young, 2007 “Optimal Design and Experimental Verification of Magnetic Actuated Optical Image Stabilization System for Camera Phone,” The 10th Joint MMM/Intermag Conference to be held in Tempa, Florida on November 5-9, 2007. (EI Publication), Feb. 2009
166. Yi-Ling Yang, Paul C.-P. Chao, Cheng-Kuo Sung, 2007, “Landing Posture Control of a Generalized 5-RDOF Twin-body System via Methods of Input-output Linearization and PD Control,” The 46th IEEE Conference on Decision and Control, Dec 12-14, New Orlean, LA, USA, pp. 1681-1686. (EI Publication) , Feb. 2009" href="/zh_tw/research/Conference_Papers/Yi-Ling-Yang-Paul-C-P-Chao-Cheng-Kuo-Sung-2007-“Landing-Posture-Control-of-a-Generalized-5-RDOF-Twin-body-System-via-Methods-of-Input-output-Linearization-and-PD-Control-”-The-46th-IEEE-Conference-on-Decision-and-Control-Dec-12-14-New-Orlean-LA-USA-pp-1681-1686- -EI-Publication-59225272" target="_blank">Yi-Ling Yang, Paul C.-P. Chao, Cheng-Kuo Sung, 2007, “Landing Posture Control of a Generalized 5-RDOF Twin-body System via Methods of Input-output Linearization and PD Control,” The 46th IEEE Conference on Decision and Control, Dec 12-14, New Orlean, LA, USA, pp. 1681-1686. (EI Publication) , Feb. 2009
167. Paul C.- P. Chao, C.- W. Chiu, Tsu-Hsien Liu, “Pull-in Predictions for a Electrostatically Actuated Micro-Beam Based on a Continuous Model and Bifurcation Analysis,” The 31st National Conference on Theoretical and Applied Mechanics, December 21-22, 2007, ISU, Kaohsiung, Taiwan, R.O.C., Feb. 2009" href="/zh_tw/research/Conference_Papers/Paul-C-P-Chao-C-W-Chiu-Tsu-Hsien-Liu-“Pull-in-Predictions-for-a-Electrostatically-Actuated-Micro-Beam-Based-on-a-Continuous-Model-and-Bifurcation-Analysis-”-The-31st-National-Conference-on-Theoretical-and-Applied-Mechanics-December-21-22-2007-ISU-Kaohsiung-Taiwan-R-O-C-76736975" target="_blank">
168. Paul C.- P. Chao, C.- W. Chiu, Tsu-Hsien Liu, “Pull-in Predictions for a Electrostatically Actuated Micro-Beam Based on a Continuous Model and Bifurcation Analysis,” The 31st National Conference on Theoretical and Applied Mechanics, December 21-22, 2007, ISU, Kaohsiung, Taiwan, R.O.C., Feb. 2009
169. Bo-Hong Lu, Yi-Chang Huang, Yu-Jhu Lin1, Paul C.-P. Chao, Shaou-Gang Miaou, Ming Chang and Jeng-Sheng Huang, “Image Servo Control for Three-dimensional Nano-machining System,” The 2007 CACS International Automatic Control Conference, National Chung Hsing University, Taichung, Taiwan, Nov. 9-11, 2007., Feb. 2009" href="/zh_tw/research/Conference_Papers/Bo-Hong-Lu-Yi-Chang-Huang-Yu-Jhu-Lin1-Paul-C-P-Chao-Shaou-Gang-Miaou-Ming-Chang-and-Jeng-Sheng-Huang-“Image-Servo-Control-for-Three-dimensional-Nano-machining-System-”-The-2007-CACS-International-Automatic-Control-Conference-National-Chung-Hsing-University-Taichung-Taiwan-Nov-9-11-2007-98232705" target="_blank">Bo-Hong Lu, Yi-Chang Huang, Yu-Jhu Lin1, Paul C.-P. Chao, Shaou-Gang Miaou, Ming Chang and Jeng-Sheng Huang, “Image Servo Control for Three-dimensional Nano-machining System,” The 2007 CACS International Automatic Control Conference, National Chung Hsing University, Taichung, Taiwan, Nov. 9-11, 2007., Feb. 2009
170. H.-K. Liang , Paul C.-P. Chao and Jeng-Sheng Huang, “A Study of Fast Auto-focusing Method using GA-based Neural Network,” Proceedings of the 2007 Congress of Chinese Society of Mechanical Engineering, Chungli, Taiwan, Nov. 23-24, 2007., Feb. 2009" href="/zh_tw/research/Conference_Papers/H-K-Liang-Paul-C-P-Chao-and-Jeng-Sheng-Huang-“A-Study-of-Fast-Auto-focusing-Method-using-GA-based-Neural-Network-”-Proceedings-of-the-2007-Congress-of-Chinese-Society-of-Mechanical-Engineering-Chungli-Taiwan-Nov-23-24-2007-98073106" target="_blank">H.-K. Liang , Paul C.-P. Chao and Jeng-Sheng Huang, “A Study of Fast Auto-focusing Method using GA-based Neural Network,” Proceedings of the 2007 Congress of Chinese Society of Mechanical Engineering, Chungli, Taiwan, Nov. 23-24, 2007., Feb. 2009
171. Yu-Zheng Lin, Chi-Wei Chiu and Paul C.-P. Chao, “Tunable Focus Length Liquid Crystal Lens with Multi-ring Type Electrode Pattern,” OPT2007, Taipei, Taiwan., Feb. 2009" href="/zh_tw/research/Conference_Papers/Yu-Zheng-Lin-Chi-Wei-Chiu-and-Paul-C-P-Chao-“Tunable-Focus-Length-Liquid-Crystal-Lens-with-Multi-ring-Type-Electrode-Pattern-”-OPT2007-Taipei-Taiwan-7260333" target="_blank">
172. Yu-Zheng Lin, Chi-Wei Chiu and Paul C.-P. Chao, “Tunable Focus Length Liquid Crystal Lens with Multi-ring Type Electrode Pattern,” OPT2007, Taipei, Taiwan., Feb. 2009
173. Paul C.-P. Chao, Wei-Dar Chen, and Chi-Wei Chiu, “Design, Fabrication and Experimental Validation of a Miniaturized Rotary Generator with Planar Coils and Optimization via Genetic Algorithm,” The Intermag Conference held in Madrid, Spain, on May 4-8, 2008. (EI Publication), Feb. 2009" href="/zh_tw/research/Conference_Papers/Paul-C-P-Chao-Wei-Dar-Chen-and-Chi-Wei-Chiu-“Design-Fabrication-and-Experimental-Validation-of-a-Miniaturized-Rotary-Generator-with-Planar-Coils-and-Optimization-via-Genetic-Algorithm-”-The-Intermag-Conference-held-in-Madrid-Spain-on-May-4-8-2008-EI-Publication-89764067" target="_blank">Paul C.-P. Chao, Wei-Dar Chen, and Chi-Wei Chiu, “Design, Fabrication and Experimental Validation of a Miniaturized Rotary Generator with Planar Coils and Optimization via Genetic Algorithm,” The Intermag Conference held in Madrid, Spain, on May 4-8, 2008. (EI Publication), Feb. 2009
174. Paul C.-P. Chao, C.-Y. Shen, C.-W. Chiu, J.-S. Huang, C.-L. Wang, Solomon Chi, H.-W. Lin and S.- Y. Tsai, “Achieving Color Balance of a Large Sized BLU Directly–Lit by LEDs capped with Customized Optical Lenses,” The SID2008 Conference, Los Angles, USA. May 20-23, 2008, SID 08 Digest, pp. 870-873., Feb. 2009" href="/zh_tw/research/Conference_Papers/Paul-C-P-Chao-C-Y-Shen-C-W-Chiu-J-S-Huang-C-L-Wang-Solomon-Chi-H-W-Lin-and-S-Y-Tsai-“Achieving-Color-Balance-of-a-Large-Sized-BLU-Directly–Lit-by-LEDs-capped-with-Customized-Optical-Lenses-”-The-SID2008-Conference-Los-Angles-USA-May-20-23-2008-SID-08-Digest-pp-870-873-47895361" target="_blank">Paul C.-P. Chao, C.-Y. Shen, C.-W. Chiu, J.-S. Huang, C.-L. Wang, Solomon Chi, H.-W. Lin and S.- Y. Tsai, “Achieving Color Balance of a Large Sized BLU Directly–Lit by LEDs capped with Customized Optical Lenses,” The SID2008 Conference, Los Angles, USA. May 20-23, 2008, SID 08 Digest, pp. 870-873., Feb. 2009
175. Paul C.-P. Chao J.-Y. Shen and J.-S. Huang, 2008, “Precision Positioning of a Three-axis Optical Pickup via a Double Phase-Lead Compensator Equipped with Auto-tuned Parameters,” The 17th Annual ASME Conference on Information Storage and Processing Systems, held on June 16-17, 2007 at the Santa Clara University in California. (EI Publication), Feb. 2009" href="/zh_tw/research/Conference_Papers/Paul-C-P-Chao-J-Y-Shen-and-J-S-Huang-2008-“Precision-Positioning-of-a-Three-axis-Optical-Pickup-via-a-Double-Phase-Lead-Compensator-Equipped-with-Auto-tuned-Parameters-”-The-17th-Annual-ASME-Conference-on-Information-Storage-and-Processing-Systems-held-on-June-16-17-2007-at-the-Santa-Clara-University-in-California-EI-Publication- -85184108" target="_blank">
176. Paul C.-P. Chao J.-Y. Shen and J.-S. Huang, 2008, “Precision Positioning of a Three-axis Optical Pickup via a Double Phase-Lead Compensator Equipped with Auto-tuned Parameters,” The 17th Annual ASME Conference on Information Storage and Processing Systems, held on June 16-17, 2007 at the Santa Clara University in California. (EI Publication), Feb. 2009
177. Paul C.-P. Chao*, Lun-De Liao, Ming-Hsun Chung and Jeng-Sheng Hunag, 2008, “Robus Dual-stage and Repetitive Control Designs for an Optical Pickup with Parallel Cantilever Beams Powered by Piezo-Actuators,” The 17th Annual ASME Conference on Information Storage and Processing Systems, held on June 16-17, 2008 at the Santa Clara University in California. (EI Publication), Feb. 2009" href="/zh_tw/research/Conference_Papers/Paul-C-P-Chao-Lun-De-Liao-Ming-Hsun-Chung-and-Jeng-Sheng-Hunag-2008-“Robus-Dual-stage-and-Repetitive-Control-Designs-for-an-Optical-Pickup-with-Parallel-Cantilever-Beams-Powered-by-Piezo-Actuators-”-The-17th-Annual-ASME-Conference-on-Information-Storage-and-Processing-Systems-held-on-June-16-17-2008-at-the-Santa-Clara-University-in-California-EI-Publication-62760429" target="_blank">
178. Paul C.-P. Chao*, Lun-De Liao, Ming-Hsun Chung and Jeng-Sheng Hunag, 2008, “Robus Dual-stage and Repetitive Control Designs for an Optical Pickup with Parallel Cantilever Beams Powered by Piezo-Actuators,” The 17th Annual ASME Conference on Information Storage and Processing Systems, held on June 16-17, 2008 at the Santa Clara University in California. (EI Publication), Feb. 2009
專書/專書章節
1. 4. Chang-Po Chao, August, 1993, “Modeling a Radio Control Scale Helicopter for Robust Control Design,” Master Thesis, Michigan State University., Nov. 2013" href="/zh_tw/research/Book/4-Chang-Po-Chao-August-1993-“Modeling-a-Radio-Control-Scale-Helicopter-for-Robust-Control-Design-”-Master-Thesis-Michigan-State-University-41201419" target="_blank">4. Chang-Po Chao, August, 1993, “Modeling a Radio Control Scale Helicopter for Robust Control Design,” Master Thesis, Michigan State University., Nov. 2013
2. 3. Chang-Po Chao, June, 1997, “On the Nonlinear Dynamics of a rotating system attached with multiple centrifugal pendulum vibration absorbers,” Ph.D. Dissertation, Michigan State University. , Nov. 2013" href="/zh_tw/research/Book/3-Chang-Po-Chao-June-1997-“On-the-Nonlinear-Dynamics-of-a-rotating-system-attached-with-multiple-centrifugal-pendulum-vibration-absorbers-”-Ph-D-Dissertation-Michigan-State-University-25928360" target="_blank">3. Chang-Po Chao, June, 1997, “On the Nonlinear Dynamics of a rotating system attached with multiple centrifugal pendulum vibration absorbers,” Ph.D. Dissertation, Michigan State University. , Nov. 2013
3. 2. Y. Kang and Chang-Po Chao, “An Integration Method for Response Observation of Nonlinear Mechanical Systems Subjected to Double Excitations,” in the book of Applicable Mathematics: Its Perspectives and Challenges, Editor J. C. Misra, Narosa Publishing House, 2001, pp. 163-170., Feb. 2009" href="/zh_tw/research/Book/2-Y-Kang-and-Chang-Po-Chao-“An-Integration-Method-for-Response-Observation-of-Nonlinear-Mechanical-Systems-Subjected-to-Double-Excitations-”-in-the-book-of-Applicable-Mathematics-Its-Perspectives-and-Challenges-Editor-J-C-Misra-Narosa-Publishing-House-2001-pp-163-170-81152322" target="_blank">
4. 2. Y. Kang and Chang-Po Chao, “An Integration Method for Response Observation of Nonlinear Mechanical Systems Subjected to Double Excitations,” in the book of Applicable Mathematics: Its Perspectives and Challenges, Editor J. C. Misra, Narosa Publishing House, 2001, pp. 163-170., Feb. 2009
5. 1. 趙昌博，賴政良，“光機電伺服系統概論”，(教育部光機電中心補助撰寫)，2005., Feb. 2009" href="/zh_tw/research/Book/1-趙昌博-賴政良-“光機電伺服系統概論”-教育部光機電中心補助撰寫-2005-31650256" target="_blank">1. 趙昌博，賴政良，“光機電伺服系統概論”，(教育部光機電中心補助撰寫)，2005., Feb. 2009
研究計畫
- 產學合作計畫 2011 高發電效能壓電轉換元件開發趙昌博 2011.01 ~ 2011.12 國防部軍備局中山科學研究院
- 產學合作計畫 2011 主動式有機發光二極體顯示器驅動面板不均勻度之模擬與補償與新型畫素電路設計趙昌博 2011.01 ~ 2011.12 友達光電股份有限公司
- 研究計畫 2010 可攜式EEG/EKG/fNIRS腦神經影像系統研發暨其整合型生醫感測處理晶片系統設計-子計畫二：EEG/EKG/fNIRS 之整合型微機電生醫感測器及前端類比電路設計(3/3) 趙昌博 2010.08 ~ 2011.07
- 研究計畫 2010 CNC伺服馬達的智慧型串列界面控制技術發展(2/3) 趙昌博 2009.08 ~ 2012.08
- 研究計畫 2010 3D姿勢感測、追蹤與顯示系統與嵌入式晶片系統開發(2/2) 趙昌博 2009.08 ~ 2011.07
專　　利
- 2015/11/06 觸控裝置及其雜訊補償電路及雜訊補償方法Touch control apparatus and noise compensating circuit and method thereof I569185 臺灣
- 2013/04/01 生理訊號感測裝置Physiology signal sensing device I631930 臺灣趙昌博
- 2014/03/27 溫度感測電路及其轉換電路 I585378 臺灣
- 2021/08/04 生物資訊檢測裝置 110128799 臺灣趙昌博
- 2020/06/10 具有可撓式感測貼片的橈動脈訊號量測裝置 I788673 臺灣趙昌博
- 2017/06/29 生物感測元件及其製造方法以及生物分子檢測方法 106121830 臺灣
- 2017/11/28 觸控面板驅動裝置Touch panel driving apparatus I627619 臺灣趙昌博
- 2016/12/28 驅動裝置以及驅動方法Driving device and driving method I613636 臺灣
- 2020/08/21 穿戴式生醫感測裝置Wearable Bio-Sensor Patch I763010 臺灣趙昌博
- 2019/06/12 可撓式生理感測裝置Flexible Bio-Sensor Patch I743491 臺灣趙昌博
- 2017/05/08 用於光體積變化描記圖法之感測系統的自適應性控制器Adaptive controller used in Photo plethysmography sensing system I646322 臺灣趙昌博
- 2009/02/03
- A類，新式觸控面板之驅動及讀取方式中華民國、美國專利審查中，趙昌博， NSC 97-2220-E-009-029
- 2009/02/03
- A類，結合圓環與圓洞電極之液晶變焦透鏡，中華民國專利審查中，趙昌博， NSC95-2745-E-033-001
- 2009/02/03 A類，具不等圓環電極寬度之液晶變焦透鏡，中華民國及美國專利審查中，趙昌博，NSC95-2745-E-033-001
- 2009/02/03
- A類，以光纖結合液態變焦透鏡達成三維空間中微奈米單體與群體操控之光鉗系統，中華民國專利審查中，趙昌博，NSC95-2745-E-033-001-URD
- 2009/02/03
- A類，發光二極體之透鏡結構設計，中華民國專利審查中，廖倫德，NSC94-2745-E-033-001-URD
- 2009/02/03
- A類，發光二極體之導光元件，中華民國專利編號 I286613，趙昌博、廖倫德、丘祺緯，09/2007，NSC94-2745-E-033-001-URD
- 2009/02/03 A類，微小液態軸承之動態係數量測平台，中華民國專利編號 I262369，趙昌博、黃健生、章廣賢、陳俊名， 07/2006，NSC-92-2212-E-033-002
研　　究
- 2009 趙昌博，“次世代光碟機關鍵技術研究--子計畫四：具參數自動調變功能之智慧型光學讀寫頭伺服系統研究與實現(3/3)”，行政院國家科學委員會補助專題研究計畫結案報告，NSC 96-2212-E-033-010。2009-02-03
- 2009 趙昌博，“微奈米系統特性分析、設計製造與光電檢測技術之建置與研究-子計畫三:具即時即時監測功能之奈微米光機電檢測及操作系統關鍵技術研究(3/3)”，行政院國家科學委員會補助專題研究計畫結案報告，NSC 96-2212-E-033-001。2009-02-03
- 2009 趙昌博，“LCD背光模組之LED光源結構設計與系統最佳化”，友達結案報告。 2009-02-03
- 2009 趙昌博，“次世代光碟機關鍵技術研究--子計畫四：具參數自動調變功能之智慧型光學讀寫頭伺服系統研究與實現(2/3)”，行政院國家科學委員會補助專題研究計畫結案報告，NSC 95-2212-E-033-010。2009-02-03
- 2009 趙昌博，“微奈米系統特性分析、設計製造與光電檢測技術之建置與研究-子計畫三:具即時即時監測功能之奈微米光機電檢測及操作系統關鍵技術研究(2/3)”，行政院國家科學委員會補助專題研究計畫結案報告，NSC 95-2212-E-033-001。 2009-02-03
- 2009 趙昌博，“次世代光碟機關鍵技術研究--子計畫四：具參數自動調變功能之智慧型光學讀寫頭伺服系統研究與實現(1/3)”，行政院國家科學委員會補助專題研究計畫結案報告，NSC 94-2212-E-033-010。2009-02-03
- 2009 趙昌博，“微奈米系統特性分析、設計製造與光電檢測技術之建置與研究-子計畫三:具即時即時監測功能之奈微米光機電檢測及操作系統關鍵技術研究(1/3)”，行政院國家科學委員會補助專題研究計畫結案報告，NSC 94-2212-E-033-001。2009-02-03
- 2009 趙昌博，“微揚聲器之機磁電動態建模、實驗驗證與優化”，行政院國家科學委員會補助專題研究計畫結案報告，NSC 94-2622-E-033-001-CC3。 2009-02-03
- 2009 趙昌博，“咖啡機噪音分析與進給機構設計”，UCHI結案報告。2009-02-03
- 2009
- 趙昌博，“LED光源微結構及其最佳化設計-直下式LED背光模組之解決方案”，友達影像顯示專題競賽獎計畫結案報告。2009-02-03
- 2009 趙昌博，“子計畫二：創新半主動式自動平衡裝置之設計分析與驗證 (3/3)”，行政院國家科學委員會補助專題研究計畫結案報告，NSC 93-2212-E-033-001。 2009-02-03
- 2009 趙昌博，“光學讀寫頭自動調變控制器”，工研院機械所結案報告。 2009-02-03
- 2009 趙昌博，“微型麥克風設計與製作”，經濟部工業局結案報告。 2009-02-03
- 2009 趙昌博，“微型麥克風設計與製作”，經濟部工業局結案報告。 2009-02-03
- 2009 趙昌博，“微揚聲器之薄膜振動與音場分析”，行政院國家科學委員會補助專題研究計畫進度報告，NSC 92-2622-E-033-014。2009-02-03
- 2009 趙昌博，“微揚聲器之薄膜振動與音場分析”，行政院國家科學委員會補助專題研究計畫進度報告，NSC 92-2622-E-033-014。2009-02-03
- 2009 趙昌博，“子計畫二：創新半主動式自動平衡裝置之設計分析與驗證 (2/3)”，行政院國家科學委員會補助專題研究計畫進度報告，NSC 92-2212-E-033-001。2009-02-03
- 2009 趙昌博，“微揚聲器之薄膜振動與音場分析”，侯門行結案報告。2009-02-03
- 2009 趙昌博，“微小發電機應用系統研究”，工研院機械所結案報告。2009-02-03
- 2009 趙昌博，“超高解析度致動器之控制系統設計”，工研院光電所結案報告。 2009-02-03
- 2009 趙昌博，“薄殼電子產品撞擊之模擬與分析”，行政院國家科學委員會補助專題研究計畫成果報告，NSC 91-2622-E-033-014。 2009-02-03
- 2009 趙昌博，“子計畫二：創新半主動式自動平衡裝置之設計分析與驗證 (1/3)”，行政院國家科學委員會補助專題研究計畫進度報告，NSC 91-2212-E-033-004。2009-02-03
- 2009 趙昌博，“顯微干涉技術”，工研院量測中心結案報告。 2009-02-03
- 2009 趙昌博，“二維影像處理技術應用在精密齒型量測上之研究”，中科院結案報告。 2009-02-03
- 2009 趙昌博，“光碟機主動式減振裝置”，工研院光電所結案報告。 2009-02-03
- 2009 趙昌博，“六軸工具機伺服控制系統開發”，行政院國家科學委員會補助專題研究計畫成果報告，NSC 90-2212-E033-010。 2009-02-03
- 2009
- 趙昌博，“高速軌道車輛系統轉向架設計與系統鑑別”，行政院國家科學委員會補助專題研究計畫成果報告，NSC89-2218-E-033-024。2009-02-03
- 2009 趙昌博，“軌道車輛的動力分析及電腦模擬系統之建立”，行政院國家科學委員會補助專題研究計畫成果報告，NSC89-2212-E-161-003。 2009-02-03
- 2009 趙昌博，“光碟機主動式減振裝置”，經濟部科技研究發展專案計畫成果報告。 2009-02-03
- 2009 Steven W. Shaw and Chang-Po Chao, March, 20, 1996, “Estimation of the Required Absorber Inertia for Use on I3 Diesel Engine,” submitted to Ford Motor Company in Dearborn.2009-02-03
學　　歷

臺灣   國立成功大學   機器工程   學士
美國   密西根州立大學   Control/ME   碩士
美國   密西根州立大學   Control/ME   博士
經　　歷
- ASME Journal of Vibration and Acoustics (JVA) (an ASME SCI Journal)
- IEEE Sensors Journal (a flagship journal of IEEE Sensors Council and an SCI Journal)
- 交通大學電控系
- 交通大學推廣教育中心
- 台灣福特汽車公司產品研發部
- 美國克萊斯勒汽車公司動力傳輸部門
榮　　譽

2013   校外榮譽事項
   獎項名稱 ASME Fellow (美國機械工程學會會士)
   頒獎單位 ASME

2010   校外榮譽事項
   獎項名稱指導學生電控碩9712552陳昱翰、電控博9512806丘祺緯榮獲IEEE/ASME ISPS-2010 最佳論文
   頒獎單位

2009   校外榮譽事項
  獎項名稱 2009，擔任 IEEE Taipei Section 秘書長期間，獲 IEEE 亞太區(Region 10) 頒發 IEEE MGA Award.
   頒獎單位

2009   校外榮譽事項
   獎項名稱 2009，擔任 IEEE Taipei Section 秘書長期間，獲 IEEE 總會頒發 IEEE Large Section Award.
   頒獎單位

2009   校外榮譽事項
   獎項名稱指導學生廖倫德等同學榮獲2009第十六屆奈米元件技術研討會最佳論文
   頒獎單位第十六屆奈米元件技術研討會

2008   校外榮譽事項
   獎項名稱 2008 Keynote Speech in 台北國際光電週系列研討會, Market & Technology Trend Conference, 題目為“液晶鏡頭技術剖析”。
   頒獎單位

2007   校外榮譽事項
   獎項名稱 2007 指導學生得 31 st 中國力學協會論文佳作獎，論文為”Pull-in Predictions for a Electrostatically Actuated Micro-Beam Based on a Continuous Model and Bifurcation Analysis”。
   頒獎單位

2007   校外榮譽事項
   獎項名稱指導學生丘祺緯、林育正、施凱騰榮獲2007 龍騰微笑專題競賽獎—貳獎(壹獎從缺)，題目為”液晶變焦透鏡”，獎金壹百萬元。
   頒獎單位

2007   校外榮譽事項
   獎項名稱 2007 SPIE proceedings, June 2007 – The published SPIE Journal paper is listed in one of Top Notch Researches, which is “Design of a Novel LED Lens Cap and Optimization of LED Placement in a Large Area Direct Backlight for LCD-TVs.”
   頒獎單位

2007   校外榮譽事項
   獎項名稱 2007、2008、2009、2010、2011 國立交通大學電資學院傑出人士榮譽獎。
   頒獎單位

2006   校外榮譽事項
   獎項名稱 2006 獲龍騰微笑專題競賽獎--佳作，題目為”應用 LED 顯示系統之最佳解決方案”，獎金十萬元。
   頒獎單位

2006   校外榮譽事項
   獎項名稱 2006 Merited as one of most cited authors for Journal of Sound and Vibration. (A Formal Congratulation Letter)
   頒獎單位

2005   校外榮譽事項
   獎項名稱 2005 中原大學 Award of excellence in 研究創作。
   頒獎單位

2005   校外榮譽事項
   獎項名稱 2005 指導學生得中國工程師協會中原分會論文推薦獎，論文為”A Direct LED Backlighting module for LCD-TV Design and Optics Color Compensate Simulation and Design the LED Compensation Circuit”。
   頒獎單位

2005   校外榮譽事項
   獎項名稱 2005 指導學生得中國工程師協會全國論文特優(第一名)，論文為”Design of the auto-tuning strategy for an optical pickup”。
   頒獎單位

2005   校外榮譽事項
   獎項名稱受邀於 12/23/2005 至香港中文大學演講，講題為“A Novel Method to Predict the Pull-in Voltage in a Closed Form for Deformed Micro-plates Actuated by a Distributed Electrostatic Force”。
   頒獎單位

2005   校外榮譽事項
   獎項名稱 2005 獲友達影像顯示專題競賽獎(AUO Award 2005)，題目為”LED 光源微結構及其最佳化設計-直下式 LED 背光模組之解決方案”，獎金二十萬元。
   頒獎單位

2004   校外榮譽事項
   獎項名稱 2004 指導學生參加中原大學機械系學生專題實作競賽得特優(第一名)。論文為” LED 背光模組均勻化之光機系統設計”。
   頒獎單位

2004   校外榮譽事項
   獎項名稱 2004 獲得財團法人中華古機械文教基金會蔡隆文教授紀念獎。
   頒獎單位

2004   校外榮譽事項
   獎項名稱 2004 獲得中華民國第七屆全國機構與機器設計學術研討會蔡隆文紀念獎----表彰研究傑出。
   頒獎單位

2004   校外榮譽事項
   獎項名稱 2004 論文”非線性承載底座對於滾珠型自動平衡裝置動態性能之影響” 獲得中華民國第七屆全國機構與機器設計學術研討會最佳論文獎。
   頒獎單位

2004   校外榮譽事項
   獎項名稱 2004 指導學生參加教育部光機電資源中心學生專題實作競賽得第三名。
   頒獎單位

2004   校外榮譽事項
   獎項名稱 2004 指導學生參加中原大學機械系學生專題實作競賽得第二、三名。
   頒獎單位

2004   校外榮譽事項
   獎項名稱 2004 中原大學 Award of excellence in 研究創作.
   頒獎單位

2004   校外榮譽事項
   獎項名稱 2004 所著論文 “Optimal Design of an Ultrasonic Resonator via Finite Element Modeling and Taguchi Methodology”獲選為 ASME Journal of Vibration and Acoustics 於 2004 年 October 期之第一篇論文 (with email recognition)。
   頒獎單位

2003   校外榮譽事項
   獎項名稱 2003 中原大學 Award of excellence in 研究創作.
   頒獎單位

2002   校外榮譽事項
   獎項名稱 2002 指導學生參加教育部光機電資源中心學生專題實作競賽得第三名。
   頒獎單位

2000   校外榮譽事項
   獎項名稱受邀在 2000 年的 12 月 20 日至 22 日至 Indian Institute of Technology 參加 International Conference on Recent Advances in Mathematical Sciences and Symposium on Challenges for the New Millennium 做專題演講。
   頒獎單位

1999   校外榮譽事項
   獎項名稱 The paper “Attenuation of Engine Torsional Vibration Using Tuned Absorbers” received 1999 Arch T. Colwell Merit Best Paper Award from Society of Automotive Engineering (SAE) as contributions to mobility engineering. (This paper is 1 of 20 sele
   頒獎單位

1994   校外榮譽事項
   獎項名稱 1994 年七月獲得 Michigan State University (USA) 機械工程系教學優良獎。
   頒獎單位

1911   校外榮譽事項
   獎項名稱 Invited papers by ISA transactions (SCI Journal) and a Special session in Journals of System Sciences (SCI Journal).
   頒獎單位
行政範疇

年度 2007
著作名稱趙昌博，“次世代光碟機關鍵技術研究--子計畫四：具參數自動調變功能之智慧型光學讀寫頭伺服系統研究與實現(3/3)”，行政院國家科學委員會補助專題研究計畫結案報告，NSC 96-2212-E-033-010。
其他技術報告
參考連結

年度 2007
著作名稱趙昌博，“微奈米系統特性分析、設計製造與光電檢測技術之建置與研究-子計畫三:具即時即時監測功能之奈微米光機電檢測及操作系統關鍵技術研究(3/3)”，行政院國家科學委員會補助專題研究計畫結案報告，NSC 96-2212-E-033-001。
其他技術報告
參考連結

年度 2006
著作名稱趙昌博，“LCD背光模組之LED光源結構設計與系統最佳化”，友達結案報告。
其他技術報告
參考連結
年度 2006
著作名稱趙昌博，“次世代光碟機關鍵技術研究--子計畫四：具參數自動調變功能之智慧型光學讀寫頭伺服系統研究與實現(2/3)”，行政院國家科學委員會補助專題研究計畫結案報告，NSC 95-2212-E-033-010。
其他技術報告
參考連結

年度 2006
著作名稱趙昌博，“微奈米系統特性分析、設計製造與光電檢測技術之建置與研究-子計畫三:具即時即時監測功能之奈微米光機電檢測及操作系統關鍵技術研究(2/3)”，行政院國家科學委員會補助專題研究計畫結案報告，NSC 95-2212-E-033-001。
其他技術報告
參考連結

年度 2005
著作名稱趙昌博，“次世代光碟機關鍵技術研究--子計畫四：具參數自動調變功能之智慧型光學讀寫頭伺服系統研究與實現(1/3)”，行政院國家科學委員會補助專題研究計畫結案報告，NSC 94-2212-E-033-010。
其他技術報告
參考連結

年度 2005
著作名稱趙昌博，“微奈米系統特性分析、設計製造與光電檢測技術之建置與研究-子計畫三:具即時即時監測功能之奈微米光機電檢測及操作系統關鍵技術研究(1/3)”，行政院國家科學委員會補助專題研究計畫結案報告，NSC 94-2212-E-033-001。
其他技術報告
參考連結

年度 2005
著作名稱趙昌博，“微揚聲器之機磁電動態建模、實驗驗證與優化”，行政院國家科學委員會補助專題研究計畫結案報告，NSC 94-2622-E-033-001-CC3。
其他技術報告
參考連結

年度 2004
著作名稱趙昌博，“咖啡機噪音分析與進給機構設計”，UCHI結案報告。
其他技術報告
參考連結

年度 2004
著作名稱趙昌博，“LED光源微結構及其最佳化設計-直下式LED背光模組之解決方案”，友達影像顯示專題競賽獎計畫結案報告。
其他技術報告
參考連結

年度 2004
著作名稱趙昌博，“子計畫二：創新半主動式自動平衡裝置之設計分析與驗證 (3/3)”，行政院國家科學委員會補助專題研究計畫結案報告，NSC 93-2212-E-033-001。
其他技術報告
參考連結

年度 2003
著作名稱趙昌博，“光學讀寫頭自動調變控制器”，工研院機械所結案報告。
其他技術報告
參考連結

年度 2003
著作名稱趙昌博，“微型麥克風設計與製作”，經濟部工業局結案報告。
其他技術報告
參考連結

年度 2003
著作名稱趙昌博，“微型麥克風設計與製作”，經濟部工業局結案報告。
其他技術報告
參考連結

年度 2003
著作名稱趙昌博，“微揚聲器之薄膜振動與音場分析”，行政院國家科學委員會補助專題研究計畫進度報告，NSC 92-2622-E-033-014。
其他技術報告
參考連結

年度 2003
著作名稱趙昌博，“微揚聲器之薄膜振動與音場分析”，行政院國家科學委員會補助專題研究計畫進度報告，NSC 92-2622-E-033-014。
其他技術報告
參考連結

年度 2003
著作名稱趙昌博，“子計畫二：創新半主動式自動平衡裝置之設計分析與驗證 (2/3)”，行政院國家科學委員會補助專題研究計畫進度報告，NSC 92-2212-E-033-001。
其他技術報告
參考連結

年度 2003
著作名稱趙昌博，“微揚聲器之薄膜振動與音場分析”，侯門行結案報告。
其他技術報告
參考連結

年度 2002
著作名稱趙昌博，“微小發電機應用系統研究”，工研院機械所結案報告。
其他技術報告
參考連結

年度 2002
著作名稱趙昌博，“超高解析度致動器之控制系統設計”，工研院光電所結案報告。
其他技術報告
參考連結

年度 2002
著作名稱趙昌博，“薄殼電子產品撞擊之模擬與分析”，行政院國家科學委員會補助專題研究計畫成果報告，NSC 91-2622-E-033-014。
其他技術報告
參考連結

年度 2002
著作名稱趙昌博，“子計畫二：創新半主動式自動平衡裝置之設計分析與驗證 (1/3)”，行政院國家科學委員會補助專題研究計畫進度報告，NSC 91-2212-E-033-004。
其他技術報告
參考連結

年度 2001
著作名稱趙昌博，“顯微干涉技術”，工研院量測中心結案報告。
其他技術報告
參考連結

年度 2001
著作名稱趙昌博，“二維影像處理技術應用在精密齒型量測上之研究”，中科院結案報告。
其他技術報告
參考連結

年度 2001
著作名稱趙昌博，“光碟機主動式減振裝置”，工研院光電所結案報告。
其他技術報告
參考連結

年度 2001
著作名稱趙昌博，“六軸工具機伺服控制系統開發”，行政院國家科學委員會補助專題研究計畫成果報告，NSC 90-2212-E033-010。
其他技術報告
參考連結

年度 2000
著作名稱趙昌博，“高速軌道車輛系統轉向架設計與系統鑑別”，行政院國家科學委員會補助專題研究計畫成果報告，NSC89-2218-E-033-024。
其他技術報告
參考連結

年度 2000
著作名稱趙昌博，“軌道車輛的動力分析及電腦模擬系統之建立”，行政院國家科學委員會補助專題研究計畫成果報告，NSC89-2212-E-161-003。
其他技術報告
參考連結

年度 2000
著作名稱趙昌博，“光碟機主動式減振裝置”，經濟部科技研究發展專案計畫成果報告。
其他技術報告
參考連結

年度 1996
著作名稱 Steven W. Shaw and Chang-Po Chao, March, 20, 1996, “Estimation of the Required Absorber Inertia for Use on I3 Diesel Engine,” submitted to Ford Motor Company in Dearborn.
其他技術報告
參考連結

回上頁