Chao, Chang-Po
Job title Chair Professor
Name Chao, Chang-Po
Email
Office Tel No. Office: 31377; lab: 54301 , 54395 and (03)5737634
website http://pchao.nctu.edu.tw/
研究專長 Research interests focus on the electronics for optical systems; micro-mechatronics, control technology, micro- sensors/actuators and advanced displays.
Teaching field Linear Theory and System; Addressing Schemes of Modern
laboratory Sensors IC Laboratory
Autobiography
Paul C.-P. Chao received his B.S. in 1989 from National Cheng-Kung University, Tainan, Taiwan. He received M.S. and Ph.D. degree from Michigan State University, USA, respectively, in 1993 and 1997. After graduation, he worked for the CAE department of Chrysler Corp in Auburn Hill, Detroit, USA for two years. He is currently a faculty member of the electrical and control engineering department at National Chiao Tung University, Taiwan. Prof. Chao was the recipient of the 1999 Arch T. Colwell Merit Best Paper Award from Society of Automotive Engineering, Detroit, USA; the 2004 Long-Wen Tsai Best Paper Award from National Society of Machine Theory and Mechanism, Taiwan; the 2005 Best Paper Award from National Society of Engineers, Taiwan; and the 2002/2003/2004 CYCU Innovative Research Award; 2006 the AUO Award; 2007 the Acer Long-Term 2nd-prize Award; The 2007/2008 NCTU EEC Outstanding Research Award. He serves as the Secretary, IEEE Taipei Section, 2009-2010. In recent years, his research interests focus on the analog circuit design for optical devices/systems; micro-mechatronics, control technology, micro- sensors and actuators
Year Paper Title
2013 Paul C.-P. Chao*, W. D. Chen and C. W. Cheng, 2013, “An Intelligent Battery Fast Charging mechanism in a Generic photovoltaic system with On-line Temperature Compensation,”
Microsystem Technologies, in press. (SCI Journal, Impact Factor =0.931, NSC
97-2220-E-009-029), Nov. 2013
2013 Tse-Yi Tu, Paul C.-P. Chao*, and Yueh-Teng Mai, 2013, “A Low-Power Low-Voltage Preamplifier for Capacitor-Type Condenser Microphone,” Microsystem Technologies, in press. (SCI Journal, Impact Factor =0.931, NSC 97-2220-E-009-029), Nov. 2013
2013 Wei-Yi Chuang, Paul C.-P. Chao*, and Kuu-Young Young, 2013, “Computerized Stimulation
Parameter Adjustment that Avoids Side Effects and Minimizes Power Consumption for Deep
Brain Stimulation in Parkinson's Disease,” Journal of Biomedical Engineering, in press. (SCI
Journal, Impact Factor =1.405, NSC 95-2745-E-033-004-URD), Nov. 2013
2013 Paul C.-P. Chao*, Chun-Yin Tsai, and Chi-Wei Chiu, 2013, “Hybrid fabrication processes for a high sensitivity MEMS microphone,” Microsystem Technologies, in press. (SCI Journal, Impact Factor =0.931, NSC 97-2220-E-009-029), Nov. 2013
2013
, Nov. 2013
2013

Kuei-Yu Lee and Paul C.-P. Chao*, 2011, “A New AMOLED Pixel Circuit with Pulsed Drive and Reverse Bias to Alleviate OLED Degradation Energy Harvesting Electronics for Vibratory Devices in Self-Powered Sensors,” IEEE Transaction on Electron Device, recommended for publication. (Impact Factor = 2.719, NSC 99-2911-I-010-101)

, Jun. 2013
2013 Paul C.-P. Chao*, 2011, “Energy Harvesting Electronics for Vibratory Devices in Self-Powered Sensors,” IEEE Sensors Journal, Vol. 11, No. 12, pp. 3106-3121. (Invited Paper for celebrating 10-year anniversary issue of IEEE Sensors Journal, SCI Journal, Impact Factor =1.587, NSC 97-2221-E-007-050, NSC 99-2911-I-010-101), Jun. 2013
2012 A New AMOLED Pixel Circuit With Pulsed Drive and Reverse Bias to Alleviate OLED Degradation", Volume: 59   Issue: 4   Pages: 1123-1130   DOI: 10.1109/TED.2012.2184289   Published: APR 2012  , Oct. 2012" href="/en/research/Journal_Papers/Lee-Kuei-Yu-Chao-Paul-C-P-A-New-AMOLED-Pixel-Circuit-With-Pulsed-Drive-and-Reverse-Bias-to-Alleviate-OLED-Degradation- Volume-59-  Issue-4-  Pages-1123-1130-  DOI-10-1109-TED-2012-2184289-  Published-APR-2012  -7080140" target="_blank">Lee, Kuei-Yu;Chao, Paul C. -P. "A New AMOLED Pixel Circuit With Pulsed Drive and Reverse Bias to Alleviate OLED Degradation", Volume: 59   Issue: 4   Pages: 1123-1130   DOI: 10.1109/TED.2012.2184289   Published: APR 2012  , Oct. 2012
2012 A New Negative Liquid Crystal Lens With Multiple Ring Electrodes in Unequal Widths', Volume: 4   Issue: 1   Pages: 250-266   DOI: 10.1109/JPHOT.2012.2183583   Published: FEB 2012  , Oct. 2012" href="/en/research/Journal_Papers/Chao-P-C-P-Kao-Y-Y-Hsu-C-J-A-New-Negative-Liquid-Crystal-Lens-With-Multiple-Ring-Electrodes-in-Unequal-Widths- Volume-4-  Issue-1-  Pages-250-266-  DOI-10-1109-JPHOT-2012-2183583-  Published-FEB-2012  -68003236" target="_blank">Chao, P. C. -P.; Kao, Y. -Y.; Hsu, C. -J. "A New Negative Liquid Crystal Lens With Multiple Ring Electrodes in Unequal Widths', Volume: 4   Issue: 1   Pages: 250-266   DOI: 10.1109/JPHOT.2012.2183583   Published: FEB 2012  , Oct. 2012
2012 A New 4T0.5C AMOLED Pixel Circuit With Reverse Bias to Alleviate OLED Degradation", Volume: 33   Issue: 7   Pages: 1024-1026   DOI: 10.1109/LED.2012.2194983   Published: JUL 2012, Oct. 2012" href="/en/research/Journal_Papers/Lee-Kuei-Yu-Hsu-Yen-Ping-Chao-Paul-C-P-A-New-4T0-5C-AMOLED-Pixel-Circuit-With-Reverse-Bias-to-Alleviate-OLED-Degradation- Volume-33-  Issue-7-  Pages-1024-1026-  DOI-10-1109-LED-2012-2194983-  Published-JUL-2012-98656503" target="_blank">Lee, Kuei-Yu; Hsu, Yen-Ping; Chao, Paul C. -P."A New 4T0.5C AMOLED Pixel Circuit With Reverse Bias to Alleviate OLED Degradation", Volume: 33   Issue: 7   Pages: 1024-1026   DOI: 10.1109/LED.2012.2194983   Published: JUL 2012, Oct. 2012
2011 Paul C.-P. Chao* and Chien-Yu Shen, 2009, “Sensorless Tilt Compensation for a Three-axis Optical Pickup Using a Sliding-mode Controller Equipped with a Sliding-mode Observer,” IEEE Transactions on Control System Technology, Vol. 17, Issue 2, pp. 267-282. (SCI Journal, Impact Factor =1.211, NSC 96-2221-E-009-069 and NSC 96-2622-E-009-010-CC3), Aug. 2011
2011 Chun-Yin Tsai, Chi-Wei Chiu and Paul C.-P. Chao*, 2009, “Reliable hybrid fabrication processes for high sensitivity MEMS microphone,” Microelectronic Engineering, accepted for publication. (SCI Journal, Impact Factor =1.503, NSC96-2220-E-009-029 and 96-2622-E-009-010-CC3), Aug. 2011
2011 Lun-De Liao, Paul C.-P. Chao*, Yu-Jhu Lin, Chi-Wei Chiu, Shaou-Gang Miaou, Ming Chang and Jeng-Sheng Huang, 2009, “Precision Micro-/Nano-machining in a Scanning Electron Microscope by Run-to-Run Control Based on Image Feedbacks,” Microelectronic Engineering, Vol. 86, Issue 4-6, pp. 1162-1168, 2009. (SCI Journal, Impact Factor =1.503, NSC96-2220-E-009-029 and NSC95-2745-E-033-004-URD), Aug. 2011
2011 Lun-De Liao, Paul C.-P. Chao*, Yu-Jhu Lin, Chi-Wei Chiu, Shaou-Gang Miaou, Ming Chang and Jeng-Sheng Huang, 2009, “Precision Micro-/Nano-machining in a Scanning Electron Microscope by Run-to-Run Control Based on Image Feedbacks,” Microelectronic Engineering, Vol. 86, Issue 4-6, pp. 1162-1168, 2009. (SCI Journal, Impact Factor =1.503, NSC96-2220-E-009-029 and NSC95-2745-E-033-004-URD), Aug. 2011
2011 Tse-Yi Tu , Paul C.-P. Chao*, Chi-Wei Chiu, Chun-Chieh Wang, and Jeng-Sheng Huang, 2009, “Fuzzy Control Design of a Magnetically-Actuated Optical Image Stabilizer with Hystersis Compensation,” Journal of Applied Physics, Vol. 105, Issue 7, pp. 07F124-1-07F124-3. (SCI Journal, Impact Factor =2.171, 17/94, Physics, Applied, NSC 96-2220-E-009-029)., Aug. 2011
2011 Paul C.-P. Chao*, Chi-Wei Chiu, J.-S. Huang and Chien-Ming Chen, 2009, “Design and Construction of an In-situ Inspection Machine for Ensuring the Dynamic Performance of Fluid Bearings in Data Storage Devices,” Microsystem Technologies, Vol. 15, No. 1-2, pp. 1547-1556. (SCI Journal, Impact Factor =1.036, 95-2745-E-033-004-URD), Aug. 2011
2011 Yung-Yuan Kao, Paul C.-P. Chao*, Zong-Bin Liu, Zhi-Kuan Wang, Po-Wen Liu, Jeng-Sheng Huang, and Chang-Chun Chang, 2009, “Performance Prediction of a Small-sized Herringbone-grooved Bearing with Ferro-fluid Lubrication Considering Cavitation,” Journal of Applied Physics, Vol. 105, Issue 7, pp. 07A334-1-07A334-3. (SCI Journal, Impact Factor =2.171, 17/94, Physics, Applied, NSC 96-2220-E-009-029).
, Aug. 2011
2011 Andy Ying-Guey Fuh, Cheng-Kai Liu, Ko-Ting Cheng*, Chi-Lung Ting, Che-Chang Chen, Paul C.-P. Chao, and Hsu-Kuan Hsu, 2009, “Variable liquid crystal pre-tilt angles generated by photoalignment in homeotropically aligned azo dye-doped liquid crystals,” Applied Physics Letters, Vol. 45, 161104. (SCI Journal, Impact Factor =3.709, Ranking 2/64, Optics, NSC 97-2220-E-009-029)., Aug. 2011
2011

Lun-De Liao, Paul C.-P. Chao*, Jian-Ting Chen, Wei-Dar Chen, Wei-Hsuan Hsu, Chi-Wei Chiu, and Chin-Teng Li, 2009, “A Miniaturized Electromagnetic Generator with Planar Coils and Its Energy Harvest Circuit,” IEEE Transactions on Magnetics, Vol. 45, No. 10, pp. 4621-4627, an honored invited paper. (SCI Journal, Impact Factor =1.014, NSC97-2221-E-009-057-MY3 and NSC97-2220-E-009-029).

, Aug. 2011
2011 Lun-De Liao, Paul C.-P. Chao*, Ming-Hsun Chung and Jeng-Sheng Huang, 2010, “Robust Dual-Stage and Repetitive Control Designs for an Optical Pickup with Parallel Cantilever Beams Powered by Piezo-Actuation,” Microsystem Technologies, Vol. 16, No. 1, pp. 317-331. (SCI Journal, Impact Factor=1.036, NSC 96-2200-E-009-029 and NSC 97-2221-E-009-057-MY3)., Aug. 2011
2011 Paul C.-P. Chao*, C.-W. Chiu, J.-Y. Shen, 2010, “Precision Positioning of a Three-axis Optical Pickup via a Double Phase-Lead Compensator Equipped with Auto-tuned Parameters,” Microsystem Technologies, Vol. 16, No. 1, pp. 117-141. (SCI Journal, Impact Factor =1.036, NSC 96-2622-E-009-010-CC3 and NSC 97-2221-E-009-057-MY3)., Aug. 2011
2011 Lun-De Liao, Paul C.-P. Chao*, Chi-Wei Chiu, Chih-Wei Huang, 2010, “DC dynamic and static pull-in predictions and analysis for electrostatically actuated clamped circular micro-plates based on a continuous model,” Journal of Micromechanics and Micro-engineering, Vol. 20, pp. 025013. (SCI Journal, Impact Factor =1.930, Ranking 10/112, Mechanics, NSC 97-2221-E-009-057-MY3 and NSC 97-2220-E-009-029)., Aug. 2011
2011 Che-Hung Tsai, Lun-De Liao, Paul C.-P. Chao*, In-Chen Chen, Hsin-Fei Meng, Wei-Dar Chen, Shir-Kuan Lin and Chin-Teng Lin, 2010, “Optimal Design and Fabrication of ITO/Organic Photonic Crystals in Polymer Light Emitting Diodes using a Focused Ion Beam,” Microelectronic Engineering, Vol. 87. Issue 5-8, pp. 1331-1335. (SCI Journal, Impact Factor =1.503, NSC 97-2221-E-009-057-MY3 and NSC 97-2220-E-009-029)., Aug. 2011
2011 L. D. Liao, M. L. Li, H. Y. Lai, Y. Y. Shih, Y. C. Lo, S. Tsang, Paul C.-P. Chao, C. T. Lin, F. S. Jaw, Y. Y. Chen*, 2010, “Imaging Brain Hemodynamic Changes during Rat Forepaw Electrical Stimulation Using Functional Photoacoustic Microscopy,” NeuroImage, Vol. 52, No. 2, pp. 562-570. (SCI Journal, Impact Factor =5.739, NSC 96-2220-E-009-029, NSC97-2220-E-009-029, and NSC 97-2221-E-007-084-MY3)., Aug. 2011
2011 Wei-Yi Chuang, Paul C.-P. Chao*, and Kuu-Young Young, 2010, “Adjusting Electrode Potentials to Compensate Thermal/Tissue Effects in Deep Brain Stimulation via Finite Element Electromagnetic Analysis,” IEEE Transactions on Magnetics, Vol. 46, No. 6, pp.2397-400. (SCI Journal, Impact Factor =1.014, NSC 95-2745-E-033-004-URD)., Aug. 2011
2011 Yung-Yuan Kao, Paul C.-P. Chao* and Chieh-Wen Hsueh, 2010, “A New Low-Voltage-Driven GRIN Liquid Crystal Lens with Multiple Ring Electrodes in Unequal Width,” Optics Express, Vol. 18, No. 18, pp. 18506–18518. (SCI Journal, Impact Factor =3.709, Ranking 2/64, Optics, NSC 98-2220-E-009-018 and 97-2221-E-009-057-MY3)., Aug. 2011
2011 Paul C.-P. Chao*, Yu-Han Chen, Chi-Wei Chiu, Meng-Yen Tsai, Jyh-Yeong Chang and Shir-Kuan Lin, 2011, “A New Two-DOF Rotational Optical Image Stabilizer,” Microsystem Technologies, accepted. (SCI Journal, Impact Factor =1.036, NSC 97-2220-E-009-029), Aug. 2011
2011 Paul C.-P. Chao*, C. I. Shao, C. X. Lu and C. K. Sung, 2011, “A New Energy Harvest System with a Hula-Hoop Transformer, Micro-generator and Interface Energy-Harvesting Circuit,” Microsystem Technologies, accepted. (SCI Journal, Impact Factor =1.036, NSC 97-2220-E-009-029), Aug. 2011
2011 Paul C.-P. Chao*, Chao-Jui Hsu and Yung-Yuan Kao, 2011, “A Thin Multi-Ring Negative Liquid Crystal Lens Enabled by High-κ Dielectric Material,” Microsystem Technologies, in press. (SCI Journal, Impact Factor =1.036, NSC 97-2220-E-009-029), Aug. 2011
2011 Paul C.-P. Chao*, Pen-Yen Liao and Meng-Yen Tsai, 2011, “Robust Control Design for Precision Positioning of a Generic Piezoelectric System with Consideration of Microscopic Hysteresis Effects,” Microsystem Technologies, in press. (SCI Journal, Impact Factor =1.036, NSC 97-2220-E-009-029), Aug. 2011
2011 T. C. Chan, C.-K. Sung and Paul C.-P. Chao, 2011, “Non-linear suspension of an automatic ball balancer,” International Journal of Non-Linear Mechanics, Vol. 46, pp. 415-424. (SCI Journal, Impact Factor =1.461)., Aug. 2011
2011 C. X. Lu, C. C. Wang, C. K. Sung* and Paul C.-P Chao, 2011, “Dynamic analysis of a motion transformer mimicking a hula hoop,” ASME Journal of Vibration and Acoustics, Vol. 133, Iss. 1, pp. 014501-1-8. (SCI Journal, Impact Factor =1.211, NSC 97-2220-E-009-029)., Aug. 2011
2011 Yi-Ling Yang*, Paul C.-P. Chao, C.-K. Sung, 2011, “Optimal Control of an Under-Actuated System for Landing at Desired Postures,” IEEE Transactions on Control System Technology, Vol. 19, No. 2, pp. 248-255. (SCI Journal, Impact Factor =1.211, NSC 97-2220-E-009-029)., Aug. 2011
2009 Yi-Ling Yang, Paul C.-P. Chao*, C.-K. Sung, 2008, “Landing Posture Control of a Generalized Twin-body System Using Methods of Input-output Linearization and Computed Torque,” IEEE Transactions on Mechatronics, accepted. (SCI Journal, Impact Factor =1.211, NSC 97-2220-E-009-029), Nov. 2009
2009 Paul C.P. Chao and Chi-Wei Chiu, 2006, “The development of an on-line precision inspection machine for assuring the dynamic quality of the pick-ups used in optical disc drives,” National Conference on Non-destructive Inspection, 2006, Taoyuan, Taiwan, R. O. C.

, Feb. 2009" href="/en/research/Journal_Papers/Paul-C-P-Chao-and-Chi-Wei-Chiu-2006-“The-development-of-an-on-line-precision-inspection-machine-for-assuring-the-dynamic-quality-of-the-pick-ups-used-in-optical-disc-drives-”-National-Conference-on-Non-destructive-Inspection-2006-Taoyuan-Taiwan-R-O-C-99941152" target="_blank">

Paul C.P. Chao and Chi-Wei Chiu, 2006, “The development of an on-line precision inspection machine for assuring the dynamic quality of the pick-ups used in optical disc drives,” National Conference on Non-destructive Inspection, 2006, Taoyuan, Taiwan, R. O. C.

, Feb. 2009
2009  Yi-Ling Yang, Paul C.-P. Chao and Cheng-Kuo Sung, 2007, “Landing Posture Control of a Generalized Twin-body System via Methods of Input-output Linearization and Computed Torque,” Automation 2007 held on June 13-14, 2007 in Taipei, Taiwan.

 

, Feb. 2009" href="/en/research/Journal_Papers/ Yi-Ling-Yang-Paul-C-P-Chao-and-Cheng-Kuo-Sung-2007-“Landing-Posture-Control-of-a-Generalized-Twin-body-System-via-Methods-of-Input-output-Linearization-and-Computed-Torque-”-Automation-2007-held-on-June-13-14-2007-in-Taipei-Taiwan-  -40105444" target="_blank">

 Yi-Ling Yang, Paul C.-P. Chao and Cheng-Kuo Sung, 2007, “Landing Posture Control of a Generalized Twin-body System via Methods of Input-output Linearization and Computed Torque,” Automation 2007 held on June 13-14, 2007 in Taipei, Taiwan.

 

, Feb. 2009
2009 Yi-Ling Yang, Paul C.-P. Chao, Cheng-Kuo Sung, “Landing Posture Control of a Generalized Twin-body System with a three-DOF joint,” The 33rd Annual Conference of the IEEE Industrial Electronics Society, Nov. 5-8, 2007, Taipei, Taiwan. (EI Publication)

 

, Feb. 2009" href="/en/research/Journal_Papers/Yi-Ling-Yang-Paul-C-P-Chao-Cheng-Kuo-Sung-“Landing-Posture-Control-of-a-Generalized-Twin-body-System-with-a-three-DOF-joint-”-The-33rd-Annual-Conference-of-the-IEEE-Industrial-Electronics-Society-Nov-5-8-2007-Taipei-Taiwan-EI-Publication-  -17743830" target="_blank">

Yi-Ling Yang, Paul C.-P. Chao, Cheng-Kuo Sung, “Landing Posture Control of a Generalized Twin-body System with a three-DOF joint,” The 33rd Annual Conference of the IEEE Industrial Electronics Society, Nov. 5-8, 2007, Taipei, Taiwan. (EI Publication)

 

, Feb. 2009
2009 Paul C.-P. Chao*, Lun-De Liao, Ming-Hsun Chung and Jeng-Sheng Hunag, 2008, “Precision Positioning and Experimental Verification of a Parallel Piezo-Beam Lens Holder for Fine Track-Following in a Dual-Stage Actuator for Data Storage Devices,” Microsystem Technologies, submitted for review. (SCI Journal, Impact Factor =0.720, 95-2745-E-033-004-URD.), Feb. 2009" href="/en/research/Journal_Papers/Paul-C-P-Chao-Lun-De-Liao-Ming-Hsun-Chung-and-Jeng-Sheng-Hunag-2008-“Precision-Positioning-and-Experimental-Verification-of-a-Parallel-Piezo-Beam-Lens-Holder-for-Fine-Track-Following-in-a-Dual-Stage-Actuator-for-Data-Storage-Devices-”-Microsystem-Technologies-submitted-for-review-SCI-Journal-Impact-Factor-0-720-95-2745-E-033-004-URD-10480536" target="_blank">Paul C.-P. Chao*, Lun-De Liao, Ming-Hsun Chung and Jeng-Sheng Hunag, 2008, “Precision Positioning and Experimental Verification of a Parallel Piezo-Beam Lens Holder for Fine Track-Following in a Dual-Stage Actuator for Data Storage Devices,” Microsystem Technologies, submitted for review. (SCI Journal, Impact Factor =0.720, 95-2745-E-033-004-URD.), Feb. 2009
2009 Paul C.-P. Chao*, Lun-De Liao, Ming-Hsun Chung and Jeng-Sheng Hunag, 2008, “Precision Positioning and Experimental Verification of a Parallel Piezo-Beam Lens Holder for Fine Track-Following in a Dual-Stage Actuator for Data Storage Devices,” Microsystem Technologies, submitted for review. (SCI Journal, Impact Factor =0.720, 95-2745-E-033-004-URD.), Feb. 2009" href="/en/research/Journal_Papers/Paul-C-P-Chao-Lun-De-Liao-Ming-Hsun-Chung-and-Jeng-Sheng-Hunag-2008-“Precision-Positioning-and-Experimental-Verification-of-a-Parallel-Piezo-Beam-Lens-Holder-for-Fine-Track-Following-in-a-Dual-Stage-Actuator-for-Data-Storage-Devices-”-Microsystem-Technologies-submitted-for-review-SCI-Journal-Impact-Factor-0-720-95-2745-E-033-004-URD-15852834" target="_blank">Paul C.-P. Chao*, Lun-De Liao, Ming-Hsun Chung and Jeng-Sheng Hunag, 2008, “Precision Positioning and Experimental Verification of a Parallel Piezo-Beam Lens Holder for Fine Track-Following in a Dual-Stage Actuator for Data Storage Devices,” Microsystem Technologies, submitted for review. (SCI Journal, Impact Factor =0.720, 95-2745-E-033-004-URD.), Feb. 2009
2009 Paul C.-P. Chao* J.-Y. Shen and J.-S. Huang, 2008, “Deign and Experimental Verification of a Controller with Auto-Tuned Parameters for Precision Positioning of a Three-axis Optical Pickup,” Microsystem Technologies, submitted for review. (SCI Journal, Impact Factor =0.720, 95-2745-E-033-004-URD.)

, Feb. 2009" href="/en/research/Journal_Papers/Paul-C-P-Chao-J-Y-Shen-and-J-S-Huang-2008-“Deign-and-Experimental-Verification-of-a-Controller-with-Auto-Tuned-Parameters-for-Precision-Positioning-of-a-Three-axis-Optical-Pickup-”-Microsystem-Technologies-submitted-for-review-SCI-Journal-Impact-Factor-0-720-95-2745-E-033-004-URD-81384219" target="_blank">

Paul C.-P. Chao* J.-Y. Shen and J.-S. Huang, 2008, “Deign and Experimental Verification of a Controller with Auto-Tuned Parameters for Precision Positioning of a Three-axis Optical Pickup,” Microsystem Technologies, submitted for review. (SCI Journal, Impact Factor =0.720, 95-2745-E-033-004-URD.)

, Feb. 2009
2009 C.-W. Chiu, Paul C.-P. Chao* and J.-Y. Shen, 2008, “Deign and Construction of an In-situ Inspection Machine for Ensuring the Dynamic Performance of Fluid Bearings in Data Storage Devices,” Microsystem Technologies, submitted for review. (SCI Journal, Impact Factor =0.720, 95-2745-E-033-004-URD.), Feb. 2009" href="/en/research/Journal_Papers/C-W-Chiu-Paul-C-P-Chao-and-J-Y-Shen-2008-“Deign-and-Construction-of-an-In-situ-Inspection-Machine-for-Ensuring-the-Dynamic-Performance-of-Fluid-Bearings-in-Data-Storage-Devices-”-Microsystem-Technologies-submitted-for-review-SCI-Journal-Impact-Factor-0-720-95-2745-E-033-004-URD-55512488" target="_blank">C.-W. Chiu, Paul C.-P. Chao* and J.-Y. Shen, 2008, “Deign and Construction of an In-situ Inspection Machine for Ensuring the Dynamic Performance of Fluid Bearings in Data Storage Devices,” Microsystem Technologies, submitted for review. (SCI Journal, Impact Factor =0.720, 95-2745-E-033-004-URD.), Feb. 2009
2009 Chang-Po Chao* and Cheng-Liang Lai, 2003, “Boundary Control of an Axially Moving String via Fuzzy Sliding-Mode and Fuzzy Neural Network Methods,” Journal of Sound and Vibration, Vol. 262, No.4, pp 795 - 813. (SCI Journal, Impact Factor = 0.724, NSC NSC89-2218- E033-024), Feb. 2009" href="/en/research/Journal_Papers/Chang-Po-Chao-and-Cheng-Liang-Lai-2003-“Boundary-Control-of-an-Axially-Moving-String-via-Fuzzy-Sliding-Mode-and-Fuzzy-Neural-Network-Methods-”-Journal-of-Sound-and-Vibration-Vol-262-No-4-pp-795-813-SCI-Journal-Impact-Factor-0-724-NSC-NSC89-2218-E033-024-2544627" target="_blank">Chang-Po Chao* and Cheng-Liang Lai, 2003, “Boundary Control of an Axially Moving String via Fuzzy Sliding-Mode and Fuzzy Neural Network Methods,” Journal of Sound and Vibration, Vol. 262, No.4, pp 795 - 813. (SCI Journal, Impact Factor = 0.724, NSC NSC89-2218- E033-024), Feb. 2009
2009 Paul C.-P. Chao*, Yaw-Der Huang and Cheng-Kuo Sung, Nov, 2003, “Non-planar Dynamic Modeling and Analysis of an Automatic Balancer System Equipped with Multiple Balancing Balls,” Mechanism and Machine Theory, Vol 38, No. 11, pp. 1289-1305. (SCI Journal, Impact Factor =0.459, NSC89-2218- E033-024)

, Feb. 2009" href="/en/research/Journal_Papers/Paul-C-P-Chao-Yaw-Der-Huang-and-Cheng-Kuo-Sung-Nov-2003-“Non-planar-Dynamic-Modeling-and-Analysis-of-an-Automatic-Balancer-System-Equipped-with-Multiple-Balancing-Balls-”-Mechanism-and-Machine-Theory-Vol-38-No-11-pp-1289-1305-SCI-Journal-Impact-Factor-0-459-NSC89-2218-E033-024-23183716" target="_blank">

Paul C.-P. Chao*, Yaw-Der Huang and Cheng-Kuo Sung, Nov, 2003, “Non-planar Dynamic Modeling and Analysis of an Automatic Balancer System Equipped with Multiple Balancing Balls,” Mechanism and Machine Theory, Vol 38, No. 11, pp. 1289-1305. (SCI Journal, Impact Factor =0.459, NSC89-2218- E033-024)

, Feb. 2009
2009 Paul C.-P. Chao*, Jeng-Sheng Huang, and Cheng-Liang Lai, July, 2003, “Nonlinear Dynamic Modeling and Actuation Strategy for a Three-axis Four-wire Type Optical Pickup,” Sensors and Actuators: A. Physical, Vol. 105, No. 2, pp. 171- 182. (SCI Journal, Impact Factor =1.422, NSC 90-2212-E033-010), Feb. 2009" href="/en/research/Journal_Papers/Paul-C-P-Chao-Jeng-Sheng-Huang-and-Cheng-Liang-Lai-July-2003-“Nonlinear-Dynamic-Modeling-and-Actuation-Strategy-for-a-Three-axis-Four-wire-Type-Optical-Pickup-”-Sensors-and-Actuators-A-Physical-Vol-105-No-2-pp-171-182-SCI-Journal-Impact-Factor-1-422-NSC-90-2212-E033-010-20956457" target="_blank">Paul C.-P. Chao*, Jeng-Sheng Huang, and Cheng-Liang Lai, July, 2003, “Nonlinear Dynamic Modeling and Actuation Strategy for a Three-axis Four-wire Type Optical Pickup,” Sensors and Actuators: A. Physical, Vol. 105, No. 2, pp. 171- 182. (SCI Journal, Impact Factor =1.422, NSC 90-2212-E033-010), Feb. 2009
2009 Chun-Chieh Wang, Cheng-Kuo Sung*, and Paul C. P. Chao, 2003, “Measurement system for the vibrations of an optical disc drive equipped with the automatic balancer system,” Mechatronics Magazine, Vol. 11, pp. 122-125. (Chinese magazine), Feb. 2009" href="/en/research/Journal_Papers/Chun-Chieh-Wang-Cheng-Kuo-Sung-and-Paul-C-P-Chao-2003-“Measurement-system-for-the-vibrations-of-an-optical-disc-drive-equipped-with-the-automatic-balancer-system-”-Mechatronics-Magazine-Vol-11-pp-122-125-Chinese-magazine-98264746" target="_blank">Chun-Chieh Wang, Cheng-Kuo Sung*, and Paul C. P. Chao, 2003, “Measurement system for the vibrations of an optical disc drive equipped with the automatic balancer system,” Mechatronics Magazine, Vol. 11, pp. 122-125. (Chinese magazine), Feb. 2009
2009 Paul C.-P. Chao*, Jeng-Sheng Huang and Chi-Wei Chiu, 2004, “Optimal Profile Design for the Resonator Beam of an Ultrasonic Motor via Finite Element Modeling and Taguchi Methodology,” ASME Journal of Vibration and Acoustics, Vol. 126, pp. 465- 475. (SCI Journal, Impact Factor = 0.694, NSC 90-2212-E033-010), Feb. 2009" href="/en/research/Journal_Papers/Paul-C-P-Chao-Jeng-Sheng-Huang-and-Chi-Wei-Chiu-2004-“Optimal-Profile-Design-for-the-Resonator-Beam-of-an-Ultrasonic-Motor-via-Finite-Element-Modeling-and-Taguchi-Methodology-”-ASME-Journal-of-Vibration-and-Acoustics-Vol-126-pp-465-475-SCI-Journal-Impact-Factor-0-694-NSC-90-2212-E033-010-71774958" target="_blank">Paul C.-P. Chao*, Jeng-Sheng Huang and Chi-Wei Chiu, 2004, “Optimal Profile Design for the Resonator Beam of an Ultrasonic Motor via Finite Element Modeling and Taguchi Methodology,” ASME Journal of Vibration and Acoustics, Vol. 126, pp. 465- 475. (SCI Journal, Impact Factor = 0.694, NSC 90-2212-E033-010), Feb. 2009
2009 Paul C.-P. Chao*, Cheng-Liang Lai, and Jeng-Sheng Huang, 2004, “Intelligent Actuation Strategy for a Three-DOF Four-wire Type Optical Pickup,” Sensors and Actuators: A. Physical, Vol. 117, No. 1, pp. 28- 40. (SCI Journal, Impact Factor =1.462, NSC 91-2212-E033-004)

, Feb. 2009" href="/en/research/Journal_Papers/Paul-C-P-Chao-Cheng-Liang-Lai-and-Jeng-Sheng-Huang-2004-“Intelligent-Actuation-Strategy-for-a-Three-DOF-Four-wire-Type-Optical-Pickup-”-Sensors-and-Actuators-A-Physical-Vol-117-No-1-pp-28-40-SCI-Journal-Impact-Factor-1-462-NSC-91-2212-E033-004-99592394" target="_blank">

Paul C.-P. Chao*, Cheng-Liang Lai, and Jeng-Sheng Huang, 2004, “Intelligent Actuation Strategy for a Three-DOF Four-wire Type Optical Pickup,” Sensors and Actuators: A. Physical, Vol. 117, No. 1, pp. 28- 40. (SCI Journal, Impact Factor =1.462, NSC 91-2212-E033-004)

, Feb. 2009
2009 Paul C.-P. Chao* and Jeng-Sheng Huang, 2005, “Calculating Rotordynamic Coefficients of a Ferrofluid -lubricated and Herringbone-Grooved Journal Bearing via Finite Difference Analysis,” Tribology Letters, Vol. 19, No. 2. pp. 101-110. (SCI Journal, Impact Factor =1.504, NSC 92-2212-E033-01), Feb. 2009" href="/en/research/Journal_Papers/Paul-C-P-Chao-and-Jeng-Sheng-Huang-2005-“Calculating-Rotordynamic-Coefficients-of-a-Ferrofluid-lubricated-and-Herringbone-Grooved-Journal-Bearing-via-Finite-Difference-Analysis-”-Tribology-Letters-Vol-19-No-2-pp-101-110-SCI-Journal-Impact-Factor-1-504-NSC-92-2212-E033-01-59764958" target="_blank">Paul C.-P. Chao* and Jeng-Sheng Huang, 2005, “Calculating Rotordynamic Coefficients of a Ferrofluid -lubricated and Herringbone-Grooved Journal Bearing via Finite Difference Analysis,” Tribology Letters, Vol. 19, No. 2. pp. 101-110. (SCI Journal, Impact Factor =1.504, NSC 92-2212-E033-01), Feb. 2009
2009 Paul C.-P. Chao*, Cheng-Kuo Sung and Hui-Chung Leu, 2005, “Effects of Rolling Friction of the Balancing Balls on the Automatic Ball Balancer for Optical Disk Drives,” ASME Journal of Tribology, Vol. 127, pp. 845-856. (SCI Journal, Impact Factor =0.682, NSC 92-2212-E033-01)

, Feb. 2009" href="/en/research/Journal_Papers/Paul-C-P-Chao-Cheng-Kuo-Sung-and-Hui-Chung-Leu-2005-“Effects-of-Rolling-Friction-of-the-Balancing-Balls-on-the-Automatic-Ball-Balancer-for-Optical-Disk-Drives-”-ASME-Journal-of-Tribology-Vol-127-pp-845-856-SCI-Journal-Impact-Factor-0-682-NSC-92-2212-E033-01-55200784" target="_blank">

Paul C.-P. Chao*, Cheng-Kuo Sung and Hui-Chung Leu, 2005, “Effects of Rolling Friction of the Balancing Balls on the Automatic Ball Balancer for Optical Disk Drives,” ASME Journal of Tribology, Vol. 127, pp. 845-856. (SCI Journal, Impact Factor =0.682, NSC 92-2212-E033-01)

, Feb. 2009
2009 Paul C.-P. Chao*, Chun-Chieh Wang, and Cheng-Kuo Sung, 2005, “Dynamic Analysis of the Optical Disk Drives Equipped with an Automatic Ball Balancer with Consideration of Torsional Motion,” ASME Journal of Applied Mechanics, Vol. 72, pp. 826-842. (SCI Journal, Impact Factor =0.752, NSC 91-2212-E033-004)

, Feb. 2009" href="/en/research/Journal_Papers/Paul-C-P-Chao-Chun-Chieh-Wang-and-Cheng-Kuo-Sung-2005-“Dynamic-Analysis-of-the-Optical-Disk-Drives-Equipped-with-an-Automatic-Ball-Balancer-with-Consideration-of-Torsional-Motion-”-ASME-Journal-of-Applied-Mechanics-Vol-72-pp-826-842-SCI-Journal-Impact-Factor-0-752-NSC-91-2212-E033-004-64489180" target="_blank">

Paul C.-P. Chao*, Chun-Chieh Wang, and Cheng-Kuo Sung, 2005, “Dynamic Analysis of the Optical Disk Drives Equipped with an Automatic Ball Balancer with Consideration of Torsional Motion,” ASME Journal of Applied Mechanics, Vol. 72, pp. 826-842. (SCI Journal, Impact Factor =0.752, NSC 91-2212-E033-004)

, Feb. 2009
2009 Paul C.-P. Chao*, Chun-Lung Huang, Cheng-Kuo Sung and Jeng-Sheng Haung, 2005, “Precision Re-positioning of the balancing ball in an auto-balancer system via a fuzzy speed regulator equipped with a sliding-mode observer,” IEEE Transactions on Control Systems Technology, Vol. 13, No. 6, pp. 1107-1118. (SCI Journal, Impact Factor =1.027, NSC 91-2212-E033-004)

, Feb. 2009" href="/en/research/Journal_Papers/Paul-C-P-Chao-Chun-Lung-Huang-Cheng-Kuo-Sung-and-Jeng-Sheng-Haung-2005-“Precision-Re-positioning-of-the-balancing-ball-in-an-auto-balancer-system-via-a-fuzzy-speed-regulator-equipped-with-a-sliding-mode-observer-”-IEEE-Transactions-on-Control-Systems-Technology-Vol-13-No-6-pp-1107-1118-SCI-Journal-Impact-Factor-1-027-NSC-91-2212-E033-004-23993783" target="_blank">

Paul C.-P. Chao*, Chun-Lung Huang, Cheng-Kuo Sung and Jeng-Sheng Haung, 2005, “Precision Re-positioning of the balancing ball in an auto-balancer system via a fuzzy speed regulator equipped with a sliding-mode observer,” IEEE Transactions on Control Systems Technology, Vol. 13, No. 6, pp. 1107-1118. (SCI Journal, Impact Factor =1.027, NSC 91-2212-E033-004)

, Feb. 2009
2009 Paul C.-P. Chao*, Pen-Yen Liao and Jeng-Sheng Huang, 2006, “A Novel Microscopic Modeling on Hysteresis Effects of Piezoelectric Structures with Assistance from Finite Elements,” International Journal of Nonlinear Sciences and Numerical Simulations, Vol. 7, No. 3, pp. 269-274. (SCI Journal, Impact Factor =4.386, Ranking 1/150, Mathematics, Applied, NSC93-2212-E-033-001 and 94-2622-E-033-001-CC3)., Feb. 2009" href="/en/research/Journal_Papers/Paul-C-P-Chao-Pen-Yen-Liao-and-Jeng-Sheng-Huang-2006-“A-Novel-Microscopic-Modeling-on-Hysteresis-Effects-of-Piezoelectric-Structures-with-Assistance-from-Finite-Elements-”-International-Journal-of-Nonlinear-Sciences-and-Numerical-Simulations-Vol-7-No-3-pp-269-274-SCI-Journal-Impact-Factor-4-386-Ranking-1-150-Mathematics-Applied-NSC93-2212-E-033-001-and-94-2622-E-033-001-CC3-44010456" target="_blank">Paul C.-P. Chao*, Pen-Yen Liao and Jeng-Sheng Huang, 2006, “A Novel Microscopic Modeling on Hysteresis Effects of Piezoelectric Structures with Assistance from Finite Elements,” International Journal of Nonlinear Sciences and Numerical Simulations, Vol. 7, No. 3, pp. 269-274. (SCI Journal, Impact Factor =4.386, Ranking 1/150, Mathematics, Applied, NSC93-2212-E-033-001 and 94-2622-E-033-001-CC3)., Feb. 2009
2009 Paul C.-P. Chao*, Pen-Yen Liao and Jeng-Sheng Huang, 2006, “A Novel Microscopic Modeling on Hysteresis Effects of Piezoelectric Structures with Assistance from Finite Elements,” International Journal of Nonlinear Sciences and Numerical Simulations, Vol. 7, No. 3, pp. 269-274. (SCI Journal, Impact Factor =4.386, Ranking 1/150, Mathematics, Applied, NSC93-2212-E-033-001 and 94-2622-E-033-001-CC3)., Feb. 2009" href="/en/research/Journal_Papers/Paul-C-P-Chao-Pen-Yen-Liao-and-Jeng-Sheng-Huang-2006-“A-Novel-Microscopic-Modeling-on-Hysteresis-Effects-of-Piezoelectric-Structures-with-Assistance-from-Finite-Elements-”-International-Journal-of-Nonlinear-Sciences-and-Numerical-Simulations-Vol-7-No-3-pp-269-274-SCI-Journal-Impact-Factor-4-386-Ranking-1-150-Mathematics-Applied-NSC93-2212-E-033-001-and-94-2622-E-033-001-CC3-64866648" target="_blank">Paul C.-P. Chao*, Pen-Yen Liao and Jeng-Sheng Huang, 2006, “A Novel Microscopic Modeling on Hysteresis Effects of Piezoelectric Structures with Assistance from Finite Elements,” International Journal of Nonlinear Sciences and Numerical Simulations, Vol. 7, No. 3, pp. 269-274. (SCI Journal, Impact Factor =4.386, Ranking 1/150, Mathematics, Applied, NSC93-2212-E-033-001 and 94-2622-E-033-001-CC3)., Feb. 2009
2009 Paul C.-P. Chao*, Ben-Cheng Yo, Cheng-Kuo Sung and Chi-Wei Chiu, 2006, “Nonlinear Dynamic Effects of Damping Washers on the Performance of Automatic Ball Balancers in Optical Disc Drives,” International Journal of Nonlinear Sciences and Numerical Simulations, Vol. 7, No. 3, pp. 275-278. (SCI Journal, Impact Factor =4.386, Ranking 1/150, Mathematics, Applied, NSC 92-2622-E-033-014 and 92-2212-E-033-001), Feb. 2009" href="/en/research/Journal_Papers/Paul-C-P-Chao-Ben-Cheng-Yo-Cheng-Kuo-Sung-and-Chi-Wei-Chiu-2006-“Nonlinear-Dynamic-Effects-of-Damping-Washers-on-the-Performance-of-Automatic-Ball-Balancers-in-Optical-Disc-Drives-”-International-Journal-of-Nonlinear-Sciences-and-Numerical-Simulations-Vol-7-No-3-pp-275-278-SCI-Journal-Impact-Factor-4-386-Ranking-1-150-Mathematics-Applied-NSC-92-2622-E-033-014-and-92-2212-E-033-001-20116584" target="_blank">Paul C.-P. Chao*, Ben-Cheng Yo, Cheng-Kuo Sung and Chi-Wei Chiu, 2006, “Nonlinear Dynamic Effects of Damping Washers on the Performance of Automatic Ball Balancers in Optical Disc Drives,” International Journal of Nonlinear Sciences and Numerical Simulations, Vol. 7, No. 3, pp. 275-278. (SCI Journal, Impact Factor =4.386, Ranking 1/150, Mathematics, Applied, NSC 92-2622-E-033-014 and 92-2212-E-033-001), Feb. 2009
2009 Paul C.-P. Chao*, Chi-Wei Chiu and C. Y. Tsai, 2006, “A Novel Method to Predict the Pull-in Voltage in a Closed Form for Deformed Micro-plates Actuated by a Distributed Electrostatic Force,” Journal of Micromechanics and Micro-engineering, Vol. 16, pp. 986-998. (SCI Journal, Impact Factor =2.321, Ranking 6/109, Mechanics, NSC94-2212-E-033-010)

, Feb. 2009" href="/en/research/Journal_Papers/Paul-C-P-Chao-Chi-Wei-Chiu-and-C-Y-Tsai-2006-“A-Novel-Method-to-Predict-the-Pull-in-Voltage-in-a-Closed-Form-for-Deformed-Micro-plates-Actuated-by-a-Distributed-Electrostatic-Force-”-Journal-of-Micromechanics-and-Micro-engineering-Vol-16-pp-986-998-SCI-Journal-Impact-Factor-2-321-Ranking-6-109-Mechanics-NSC94-2212-E-033-010-57887737" target="_blank">

Paul C.-P. Chao*, Chi-Wei Chiu and C. Y. Tsai, 2006, “A Novel Method to Predict the Pull-in Voltage in a Closed Form for Deformed Micro-plates Actuated by a Distributed Electrostatic Force,” Journal of Micromechanics and Micro-engineering, Vol. 16, pp. 986-998. (SCI Journal, Impact Factor =2.321, Ranking 6/109, Mechanics, NSC94-2212-E-033-010)

, Feb. 2009
2009 Chi-Wei Chiu* and Paul C.-P. Chao, 2006, “Development of a Precision Inspection Machine for Assuring the Dynamic Quality of the Pick-ups Used in Optical Disc Drives,” Journal of Chinese Society of Mechanical Engineering, Series C, Vol. 27, No. 5, pp. 581- 586. (EI Journal, NSC 95-2622-E-009-014-CC3)

, Feb. 2009" href="/en/research/Journal_Papers/Chi-Wei-Chiu-and-Paul-C-P-Chao-2006-“Development-of-a-Precision-Inspection-Machine-for-Assuring-the-Dynamic-Quality-of-the-Pick-ups-Used-in-Optical-Disc-Drives-”-Journal-of-Chinese-Society-of-Mechanical-Engineering-Series-C-Vol-27-No-5-pp-581-586-EI-Journal-NSC-95-2622-E-009-014-CC3-2313305" target="_blank">

Chi-Wei Chiu* and Paul C.-P. Chao, 2006, “Development of a Precision Inspection Machine for Assuring the Dynamic Quality of the Pick-ups Used in Optical Disc Drives,” Journal of Chinese Society of Mechanical Engineering, Series C, Vol. 27, No. 5, pp. 581- 586. (EI Journal, NSC 95-2622-E-009-014-CC3)

, Feb. 2009
2009 Paul C.-P. Chao* and Chien-Yu Shen, 2007, “Design and Implementation of a Sliding-mode Controller and a High-Gain Observer for Output Tracking of a Three-axis Pickup,” Sensors and Actuators: A. Physical, Vol. 135, pp. 713- 730.  (SCI Journal, Impact Factor =1.434, NSC 93-2212-E-033-001 and 94-2622-E-033-001-CC3), Feb. 2009" href="/en/research/Journal_Papers/Paul-C-P-Chao-and-Chien-Yu-Shen-2007-“Design-and-Implementation-of-a-Sliding-mode-Controller-and-a-High-Gain-Observer-for-Output-Tracking-of-a-Three-axis-Pickup-”-Sensors-and-Actuators-A-Physical-Vol-135-pp-713-730- -SCI-Journal-Impact-Factor-1-434-NSC-93-2212-E-033-001-and-94-2622-E-033-001-CC3-88269323" target="_blank">Paul C.-P. Chao* and Chien-Yu Shen, 2007, “Design and Implementation of a Sliding-mode Controller and a High-Gain Observer for Output Tracking of a Three-axis Pickup,” Sensors and Actuators: A. Physical, Vol. 135, pp. 713- 730.  (SCI Journal, Impact Factor =1.434, NSC 93-2212-E-033-001 and 94-2622-E-033-001-CC3), Feb. 2009
2009 Paul C.-P. Chao*, Cheng-Kuo Sung, Szu-Tuo Wu and Jeng-Sheng Huang, 2007, “Non-planar Modeling and Experimental Validation of a Spindle-Disk System Equipped with an Automatic Ball Balancer System in Optical Disk Drives,” Microsystem Technologies, Vol. 13, pp. 1227-1239. (SCI Journal, Impact Factor =0.720, NSC 94-2622-E-033-011-CC3 and 94-2212-E-033-010), Feb. 2009" href="/en/research/Journal_Papers/Paul-C-P-Chao-Cheng-Kuo-Sung-Szu-Tuo-Wu-and-Jeng-Sheng-Huang-2007-“Non-planar-Modeling-and-Experimental-Validation-of-a-Spindle-Disk-System-Equipped-with-an-Automatic-Ball-Balancer-System-in-Optical-Disk-Drives-”-Microsystem-Technologies-Vol-13-pp-1227-1239-SCI-Journal-Impact-Factor-0-720-NSC-94-2622-E-033-011-CC3-and-94-2212-E-033-010-30206735" target="_blank">Paul C.-P. Chao*, Cheng-Kuo Sung, Szu-Tuo Wu and Jeng-Sheng Huang, 2007, “Non-planar Modeling and Experimental Validation of a Spindle-Disk System Equipped with an Automatic Ball Balancer System in Optical Disk Drives,” Microsystem Technologies, Vol. 13, pp. 1227-1239. (SCI Journal, Impact Factor =0.720, NSC 94-2622-E-033-011-CC3 and 94-2212-E-033-010), Feb. 2009
2009  Paul C.-P. Chao* and Sung-Ching Wu, 2007, “Optimal Design of Magnetic Zooming Mechanism Used in Cameras of Mobile Phones via Genetic Algorithm,” IEEE Transactions on Magnetics, Vol. 43, No. 6, pp. 2579-2581. (SCI Journal, Impact Factor =1.014, NSC 95-2745-E-033-004-URD)

, Feb. 2009" href="/en/research/Journal_Papers/ Paul-C-P-Chao-and-Sung-Ching-Wu-2007-“Optimal-Design-of-Magnetic-Zooming-Mechanism-Used-in-Cameras-of-Mobile-Phones-via-Genetic-Algorithm-”-IEEE-Transactions-on-Magnetics-Vol-43-No-6-pp-2579-2581-SCI-Journal-Impact-Factor-1-014-NSC-95-2745-E-033-004-URD-1642975" target="_blank">

 Paul C.-P. Chao* and Sung-Ching Wu, 2007, “Optimal Design of Magnetic Zooming Mechanism Used in Cameras of Mobile Phones via Genetic Algorithm,” IEEE Transactions on Magnetics, Vol. 43, No. 6, pp. 2579-2581. (SCI Journal, Impact Factor =1.014, NSC 95-2745-E-033-004-URD)

, Feb. 2009
2009 Paul C.-P. Chao* and I-Ting Wang, 2007, “Dynamical Modeling and Experimental Validation of a Micro-speaker with Corrugated Diaphragm for Mobile Phones”, Microsystem Technologies, Vol. 13, pp. 1241-1252. (SCI Journal, Impact Factor =0.720, NSC94-2212-E-033-010, 94-2745-E-033-004-URD and 94-2622-E-033-011-CC3), Feb. 2009" href="/en/research/Journal_Papers/Paul-C-P-Chao-and-I-Ting-Wang-2007-“Dynamical-Modeling-and-Experimental-Validation-of-a-Micro-speaker-with-Corrugated-Diaphragm-for-Mobile-Phones”-Microsystem-Technologies-Vol-13-pp-1241-1252-SCI-Journal-Impact-Factor-0-720-NSC94-2212-E-033-010-94-2745-E-033-004-URD-and-94-2622-E-033-011-CC3-3854775" target="_blank">Paul C.-P. Chao* and I-Ting Wang, 2007, “Dynamical Modeling and Experimental Validation of a Micro-speaker with Corrugated Diaphragm for Mobile Phones”, Microsystem Technologies, Vol. 13, pp. 1241-1252. (SCI Journal, Impact Factor =0.720, NSC94-2212-E-033-010, 94-2745-E-033-004-URD and 94-2622-E-033-011-CC3), Feb. 2009
2009 Paul C.-P. Chao*, Chi-Wei Chiu, and Yuan Hsu-Pang, 2007, “Magneto-Electro- Dynamical Modeling and Design of a Micro-Speaker Used for Mobile Phones with Considerations of Diaphragm Corrugation and Air Closure,” IEEE Transactions on Magnetics Vol. 43, No. 6, pp. 2585-2587. (SCI Journal, Impact Factor =1.014, 95-2745-E-033-004-URD), Feb. 2009" href="/en/research/Journal_Papers/Paul-C-P-Chao-Chi-Wei-Chiu-and-Yuan-Hsu-Pang-2007-“Magneto-Electro-Dynamical-Modeling-and-Design-of-a-Micro-Speaker-Used-for-Mobile-Phones-with-Considerations-of-Diaphragm-Corrugation-and-Air-Closure-”-IEEE-Transactions-on-Magnetics-Vol-43-No-6-pp-2585-2587-SCI-Journal-Impact-Factor-1-014-95-2745-E-033-004-URD-21687733" target="_blank">Paul C.-P. Chao*, Chi-Wei Chiu, and Yuan Hsu-Pang, 2007, “Magneto-Electro- Dynamical Modeling and Design of a Micro-Speaker Used for Mobile Phones with Considerations of Diaphragm Corrugation and Air Closure,” IEEE Transactions on Magnetics Vol. 43, No. 6, pp. 2585-2587. (SCI Journal, Impact Factor =1.014, 95-2745-E-033-004-URD), Feb. 2009
2009 Paul C.-P. Chao* and Chien-Yu Shen, 2007, “Dynamic Modeling and Experimental Verification of a Piezoelectric Part Feeder in a Structure with Parallel Bimorph Beams,” Ultrasonics, Vol. 46, pp. 205-218. (SCI Journal, Impact Factor =1.322, NSC 95-2221-E-009-367)

, Feb. 2009" href="/en/research/Journal_Papers/Paul-C-P-Chao-and-Chien-Yu-Shen-2007-“Dynamic-Modeling-and-Experimental-Verification-of-a-Piezoelectric-Part-Feeder-in-a-Structure-with-Parallel-Bimorph-Beams-”-Ultrasonics-Vol-46-pp-205-218-SCI-Journal-Impact-Factor-1-322-NSC-95-2221-E-009-367-21038985" target="_blank">

Paul C.-P. Chao* and Chien-Yu Shen, 2007, “Dynamic Modeling and Experimental Verification of a Piezoelectric Part Feeder in a Structure with Parallel Bimorph Beams,” Ultrasonics, Vol. 46, pp. 205-218. (SCI Journal, Impact Factor =1.322, NSC 95-2221-E-009-367)

, Feb. 2009
2009 Chi-Wei Chiu, Paul C.-P. Chao*, and Din-Yuan Wu, 2007, “Optimal Design of Magnetic Actuated Optical Image Stabilization Mechanism for Cameras in Mobile Phones via Genetic Algorithm,” IEEE Transactions on Magnetics, Vol. 43, No. 6, pp. 2582-2584. (SCI Journal, Impact Factor =1.014, NSC 95-2745-E-033-004-URD), Feb. 2009" href="/en/research/Journal_Papers/Chi-Wei-Chiu-Paul-C-P-Chao-and-Din-Yuan-Wu-2007-“Optimal-Design-of-Magnetic-Actuated-Optical-Image-Stabilization-Mechanism-for-Cameras-in-Mobile-Phones-via-Genetic-Algorithm-”-IEEE-Transactions-on-Magnetics-Vol-43-No-6-pp-2582-2584-SCI-Journal-Impact-Factor-1-014-NSC-95-2745-E-033-004-URD-39284427" target="_blank">Chi-Wei Chiu, Paul C.-P. Chao*, and Din-Yuan Wu, 2007, “Optimal Design of Magnetic Actuated Optical Image Stabilization Mechanism for Cameras in Mobile Phones via Genetic Algorithm,” IEEE Transactions on Magnetics, Vol. 43, No. 6, pp. 2582-2584. (SCI Journal, Impact Factor =1.014, NSC 95-2745-E-033-004-URD), Feb. 2009
2009 Paul C.-P. Chao*, Lun-De Liao, Chi-Wei Chiu and Chien-Yu Shen, 2008, “Design of a Highly-Efficient Light Guide Plate for the Edge Lighting Backlight Module,” Key Engineering Material, Vol. 364-366, pp. 128-131. (EI Journal, NSC 95-2221-E-009-367), Feb. 2009" href="/en/research/Journal_Papers/Paul-C-P-Chao-Lun-De-Liao-Chi-Wei-Chiu-and-Chien-Yu-Shen-2008-“Design-of-a-Highly-Efficient-Light-Guide-Plate-for-the-Edge-Lighting-Backlight-Module-”-Key-Engineering-Material-Vol-364-366-pp-128-131-EI-Journal-NSC-95-2221-E-009-367-19732862" target="_blank">Paul C.-P. Chao*, Lun-De Liao, Chi-Wei Chiu and Chien-Yu Shen, 2008, “Design of a Highly-Efficient Light Guide Plate for the Edge Lighting Backlight Module,” Key Engineering Material, Vol. 364-366, pp. 128-131. (EI Journal, NSC 95-2221-E-009-367), Feb. 2009
2009 Paul C.-P. Chao*, Lun-De Liao, Chi-Wei Chiu and Chien-Yu Shen, 2008, “Enhancement of the Optical Performances for the LED Backlight Systems with a Novel Lens-Cap,” Key Engineering Material, Vol. 364-366, pp. 132-137. (EI Journal, NSC 995-2622-E-009-014-CC3), Feb. 2009" href="/en/research/Journal_Papers/Paul-C-P-Chao-Lun-De-Liao-Chi-Wei-Chiu-and-Chien-Yu-Shen-2008-“Enhancement-of-the-Optical-Performances-for-the-LED-Backlight-Systems-with-a-Novel-Lens-Cap-”-Key-Engineering-Material-Vol-364-366-pp-132-137-EI-Journal-NSC-995-2622-E-009-014-CC3-2225666" target="_blank">Paul C.-P. Chao*, Lun-De Liao, Chi-Wei Chiu and Chien-Yu Shen, 2008, “Enhancement of the Optical Performances for the LED Backlight Systems with a Novel Lens-Cap,” Key Engineering Material, Vol. 364-366, pp. 132-137. (EI Journal, NSC 995-2622-E-009-014-CC3), Feb. 2009
2009 Paul C.-P. Chao*, Lun-De Liao, Yi-Hua Fang, Chien-Yu Shen, Yung-Yuan Kao and Jeng-Sheng Huang, 2008, “Analytical Calculation of the Light Extraction Efficiency of Micro Cavities Light-emitting Diodes,” Key Engineering Material, Vol. 364-366, pp. 98-103. (EI Journal, NSC 94-2745-E-033-004-URD), Feb. 2009" href="/en/research/Journal_Papers/Paul-C-P-Chao-Lun-De-Liao-Yi-Hua-Fang-Chien-Yu-Shen-Yung-Yuan-Kao-and-Jeng-Sheng-Huang-2008-“Analytical-Calculation-of-the-Light-Extraction-Efficiency-of-Micro-Cavities-Light-emitting-Diodes-”-Key-Engineering-Material-Vol-364-366-pp-98-103-EI-Journal-NSC-94-2745-E-033-004-URD-88839008" target="_blank">Paul C.-P. Chao*, Lun-De Liao, Yi-Hua Fang, Chien-Yu Shen, Yung-Yuan Kao and Jeng-Sheng Huang, 2008, “Analytical Calculation of the Light Extraction Efficiency of Micro Cavities Light-emitting Diodes,” Key Engineering Material, Vol. 364-366, pp. 98-103. (EI Journal, NSC 94-2745-E-033-004-URD), Feb. 2009
2009 Paul C.-P. Chao*, Chi-Wei Chiu and Kai-Teng Shih, 2008, “A Novel Low-Torque Ball Re-Positioning Scheme Based on a Sliding-mode Ball Observer for an Automatic Balancer System,” Shock and Vibration, vol. 15, no. 2, pp. 101-126. (SCI Journal, Impact Factor =0.173, NSC 94-2622-E-033-001 and NSC 94-2754-E-033-004), Feb. 2009" href="/en/research/Journal_Papers/Paul-C-P-Chao-Chi-Wei-Chiu-and-Kai-Teng-Shih-2008-“A-Novel-Low-Torque-Ball-Re-Positioning-Scheme-Based-on-a-Sliding-mode-Ball-Observer-for-an-Automatic-Balancer-System-”-Shock-and-Vibration-vol-15-no-2-pp-101-126-SCI-Journal-Impact-Factor-0-173-NSC-94-2622-E-033-001-and-NSC-94-2754-E-033-004-78386519" target="_blank">Paul C.-P. Chao*, Chi-Wei Chiu and Kai-Teng Shih, 2008, “A Novel Low-Torque Ball Re-Positioning Scheme Based on a Sliding-mode Ball Observer for an Automatic Balancer System,” Shock and Vibration, vol. 15, no. 2, pp. 101-126. (SCI Journal, Impact Factor =0.173, NSC 94-2622-E-033-001 and NSC 94-2754-E-033-004), Feb. 2009
2009 Paul C.-P. Chao, J.-W. Hsueh, Y.-Y. Kao, C.-W. Chiu, Y.-C. Lin and T.-Y. Du, 2008, “Optomechatronic Design and Implementation of a Tunable LC Lens,” Invited Paper for Journal of Automation, Special Issue on Optomachatronics, Mar, 2008, pp. 24-30. (Local Chinese Journal)

, Feb. 2009" href="/en/research/Journal_Papers/Paul-C-P-Chao-J-W-Hsueh-Y-Y-Kao-C-W-Chiu-Y-C-Lin-and-T-Y-Du-2008-“Optomechatronic-Design-and-Implementation-of-a-Tunable-LC-Lens-”-Invited-Paper-for-Journal-of-Automation-Special-Issue-on-Optomachatronics-Mar-2008-pp-24-30-Local-Chinese-Journal-14538458" target="_blank">

Paul C.-P. Chao, J.-W. Hsueh, Y.-Y. Kao, C.-W. Chiu, Y.-C. Lin and T.-Y. Du, 2008, “Optomechatronic Design and Implementation of a Tunable LC Lens,” Invited Paper for Journal of Automation, Special Issue on Optomachatronics, Mar, 2008, pp. 24-30. (Local Chinese Journal)

, Feb. 2009
2009 Chi-Wei Chiu, Paul C.-P. Chao*, Y.-Y. Kao and Fu-Kuan Young, 2008, “Optimal Design and Experimental Verification of Magnetically Actuated Optical Image Stabilization System for Cameras in Mobile Phones,” Journal of Applied Physics, Vol. 103, No. 7, 07F136-1-3. (SCI Journal, Impact Factor =2.316, 14/84, Physics, Applied), Feb. 2009" href="/en/research/Journal_Papers/Chi-Wei-Chiu-Paul-C-P-Chao-Y-Y-Kao-and-Fu-Kuan-Young-2008-“Optimal-Design-and-Experimental-Verification-of-Magnetically-Actuated-Optical-Image-Stabilization-System-for-Cameras-in-Mobile-Phones-”-Journal-of-Applied-Physics-Vol-103-No-7-07F136-1-3-SCI-Journal-Impact-Factor-2-316-14-84-Physics-Applied-90962490" target="_blank">Chi-Wei Chiu, Paul C.-P. Chao*, Y.-Y. Kao and Fu-Kuan Young, 2008, “Optimal Design and Experimental Verification of Magnetically Actuated Optical Image Stabilization System for Cameras in Mobile Phones,” Journal of Applied Physics, Vol. 103, No. 7, 07F136-1-3. (SCI Journal, Impact Factor =2.316, 14/84, Physics, Applied), Feb. 2009
2009 Paul C.-P. Chao*, C.-Y. Shen, C.-W. Chiu, J.-S. Huang, Y.-Y. Kao, T.-Y. Tu, C.-L. Wang, H.-W. Lin, Solomon Chi and S.- Y. Tsai, 2008, “A Novel Lens Cap Designed for the RGB LEDs Installed in an Ultra-Thin and Directly Lit Backlight Unit of Large-Sized LCD TVs,” Journal of Society of Information Display, Vol. 16, No. 2, pp. 317-327. (SCIE Journal, 95-2745-E-033-004-URD), Feb. 2009" href="/en/research/Journal_Papers/Paul-C-P-Chao-C-Y-Shen-C-W-Chiu-J-S-Huang-Y-Y-Kao-T-Y-Tu-C-L-Wang-H-W-Lin-Solomon-Chi-and-S-Y-Tsai-2008-“A-Novel-Lens-Cap-Designed-for-the-RGB-LEDs-Installed-in-an-Ultra-Thin-and-Directly-Lit-Backlight-Unit-of-Large-Sized-LCD-TVs-”-Journal-of-Society-of-Information-Display-Vol-16-No-2-pp-317-327-SCIE-Journal-95-2745-E-033-004-URD-61903756" target="_blank">Paul C.-P. Chao*, C.-Y. Shen, C.-W. Chiu, J.-S. Huang, Y.-Y. Kao, T.-Y. Tu, C.-L. Wang, H.-W. Lin, Solomon Chi and S.- Y. Tsai, 2008, “A Novel Lens Cap Designed for the RGB LEDs Installed in an Ultra-Thin and Directly Lit Backlight Unit of Large-Sized LCD TVs,” Journal of Society of Information Display, Vol. 16, No. 2, pp. 317-327. (SCIE Journal, 95-2745-E-033-004-URD), Feb. 2009
2009 Paul C.-P. Chao*, Chi-Wei Chiu, He-Kai Liang and Y.-Y. Kao, 2008, “Intelligent Actuation Strategy via Image Feedbacks for a Magnetically Actuated Autofocusing Module in Mobile Phones,” Journal of Applied Physics, Vol. 103, No. 7, 07F123-1-3. (SCI Journal, Impact Factor =2.316, 14/84, Physics, Applied)

, Feb. 2009" href="/en/research/Journal_Papers/Paul-C-P-Chao-Chi-Wei-Chiu-He-Kai-Liang-and-Y-Y-Kao-2008-“Intelligent-Actuation-Strategy-via-Image-Feedbacks-for-a-Magnetically-Actuated-Autofocusing-Module-in-Mobile-Phones-”-Journal-of-Applied-Physics-Vol-103-No-7-07F123-1-3-SCI-Journal-Impact-Factor-2-316-14-84-Physics-Applied-15873376" target="_blank">

Paul C.-P. Chao*, Chi-Wei Chiu, He-Kai Liang and Y.-Y. Kao, 2008, “Intelligent Actuation Strategy via Image Feedbacks for a Magnetically Actuated Autofocusing Module in Mobile Phones,” Journal of Applied Physics, Vol. 103, No. 7, 07F123-1-3. (SCI Journal, Impact Factor =2.316, 14/84, Physics, Applied)

, Feb. 2009
2009  Paul C.-P. Chao*, C.-W. Chiu, T.-H. Liu, 2008, “DC dynamic pull-in predictions for a generalized clamped–clamped micro-beam based on a continuous model and bifurcation analysis,” Journal of Micromechanics and Micro-engineering, in press. (SCI Journal, Impact Factor =2.499, Ranking 4/110, Mechanics, NSC94-2212-E-033-010)., Feb. 2009" href="/en/research/Journal_Papers/ Paul-C-P-Chao-C-W-Chiu-T-H-Liu-2008-“DC-dynamic-pull-in-predictions-for-a-generalized-clamped–clamped-micro-beam-based-on-a-continuous-model-and-bifurcation-analysis-”-Journal-of-Micromechanics-and-Micro-engineering-in-press-SCI-Journal-Impact-Factor-2-499-Ranking-4-110-Mechanics-NSC94-2212-E-033-010-99467786" target="_blank"> Paul C.-P. Chao*, C.-W. Chiu, T.-H. Liu, 2008, “DC dynamic pull-in predictions for a generalized clamped–clamped micro-beam based on a continuous model and bifurcation analysis,” Journal of Micromechanics and Micro-engineering, in press. (SCI Journal, Impact Factor =2.499, Ranking 4/110, Mechanics, NSC94-2212-E-033-010)., Feb. 2009
2009
Paul C.-P. Chao* and Chien-Yu Shen, 2008, “Sensorless Tilt Compensation for a Three-axis Optical Pickup Using a Sliding-mode Controller Equipped with a Sliding-mode Observer,” IEEE Transactions on Control System Technology, accepted. (SCI Journal, Impact Factor =1.211, NSC 94-2212-E-033-010 and NSC 94-2622-E-033-001-CC3)
, Feb. 2009
Year Paper Title
2013 Yen-Ping Hsu, Paul C.-P. Chao, and Kuei-Yu Lee, “A New Prediction Model on the Luminance of OLEDs Subjected to Different Reverse Biases for Alleviating Degradation in AMOLED Displays,” The 2013 International Display Manufacturing Conference, held on August 27-30, 2013, Taipei, Taiwan., Nov. 2013
2013 Yen-Lin Pan, Hung-Ming Tsai, Chen-Pang Kung, Heng-Yin Chen, and Paul C.-P. Chao*, and Jang-Lin Chen, “Numerical Modeling and Analysis of Flexible Projective Capacitive Touch Panel,” The 2013 International Display Manufacturing Conference, held on August 27-30, 2013, Taipei, Taiwan., Nov. 2013
2013 Paul C.-P. Chao*, W. D. Chen and R. H. Wu, 2013, “A Battery Charge Controller for a Flyback Converter with Digital Primary Side Regulation,” The 23th Annual ASME Conference on Information Storage and Processing Systems, held on June 24-25, 2013 at the Santa Clara University in California, USA. (EI Publication), Nov. 2013
2013 Paul C.-P. Chao*, Wei-Hsuan Hsu and C. H. Tsai, 2013, “A New Active 3D Optical Proximity Sensor Array and Its Readout Circuit,” The 23th Annual ASME Conference on Information Storage and Processing Systems, held on June 24-25, 2013 at the Santa Clara University in California, USA. (EI Publication), Nov. 2013
2013 Paul C.-P. Chao*, Tse-Yi Tu, and Yung-Yuan Kao, 2013, “An LCL-Lens Array with Electrodes of Interlaced Structure in Applications of Auto-Stereoscopic Displays,” The 23th Annual ASME Conference on Information Storage and Processing Systems, held on June 24-25, 2013 at the Santa Clara University in California, USA. (EI Publication), Nov. 2013
2013 Wei-Hsuan Hsu, Paul C.-P. Chao*, W. D. Chen and C. H. Tsai, 2013, “An On-line Digital Optical Bench Tester Based on Conscopy for Lens Quality Evaluation,” The 23th Annual ASME Conference on Information Storage and Processing Systems, held on June 24-25, 2013 at the Santa Clara University in California, USA. (EI Publication), Nov. 2013
2013 Paul C.-P. Chao*, Jian-Ruei Chen, C. H. Tsai, and W. D. Chen, 2013, “Design and Realization of High Resolution (640x480) SWIR Image Acquisition,” The 23th Annual ASME Conference on
, Nov. 2013
2013 Kuei-Yu Lee, Yen-Ping Hsu, and Paul C.-P. Chao*, 2012, “Sensing TFT Vth by an External Algorithm to Compensate Non-uniformity on AMOLED Panel,” 2012 IEEE Sensors Conference, Vol. 1-3, Taipei, Taiwan, Oct. 2011. (SCI Publication), Nov. 2013
2013 Kuei-Yu Lee, Yen-Ping Hsu1, and Paul C.-P. Chao*, 2012, “Compensating OLED Degradation in an AMOLED Display Based on Measurements,” SID Digest, The Conference of Society of Information Display, 2012 in Boston, MA, USA, June 3 – 8, 2012. (EI Publication)., Nov. 2013
2013 Bing-Ze Xue and Paul C.-P. Chao*, 2012, “A new bio-sensor in the structure of a micro machined clamped-clamped inertial beam and its readout circuit,” the ASME 2012 International Design Engineering Technical Conferences, held on August 12-15, 2012, Chicago, USA. (EI Publication), Nov. 2013
2013 Kai-Teng Shih, Paul C.-P. Chao*, Yung-Yuan Kao, “Developing a Quality Assessment Method for Evaluating Focusing Quality of an LC lens used in an Optical Pickup,” 2012 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, July 11-14, Kaohsiung, Taiwan, 2012., Nov. 2013
2013 Paul C.-P. Chao*, Wei-Dar Chen and Chih-Kuo Chang, 2012, “Maximum Power Tracking of a Generic Photovoltaic System via a Fuzzy Controller and a Two-Stage DC-DC Converter,” The 22th Annual ASME Conference on Information Storage and Processing Systems, held on June 18-20, 2012 at the Santa Clara University in California, USA. (EI Publication), Nov. 2013
2013 Che-Hung Tsai and Paul C.-P. Chao*, 2012, “Optimal Design of ITO/organic Photonic Crystals in Polymer Light-emitting Diodes with Sidewall Reflectors for High Efficiency,” The 22th Annual
, Nov. 2013
2013 Tse-Yi Tu and Paul C.-P. Chao*, 2012, “A New Liquid Crystal Lens with Axis-Tunability via Three Sector Electrodes,” The 22th Annual ASME Conference on Information Storage and Processing Systems, held on June 18-20, 2012 at the Santa Clara University in California, USA. (EI Publication), Nov. 2013
2013 T. C. Chan, C.-K. Sung and Paul C.-P. Chao, 2012, “Friction effect on ball positioning of an automatic balancer in optical disk drives,” The 22th Annual ASME Conference on Information Storage and Processing Systems, held on June 18-20, 2012 at the Santa Clara University in California, USA. (EI Publication), Nov. 2013
2013 Paul C.-P. Chao* and Chun-Wei Chiu, 2012, “Design and Experimental Validation of a
, Nov. 2013
2013  Wan-Jun Lin, Paul C.-P. Chao * , Shir-Kuan Lin, Hsiao-Wen Zan, 2011, “A Novel Readout Circuit for an OTFD Gas Sensor with a New Front-end Trans-impedance Amplifier,” 2011 IEEE Sensors Conference, Vol. 1-3, Limerick, Ireland, Oct. 2011. (SCI Publication), Jun. 2013
2013  Paul.  C.-P.  Chao * ,  Po-Hung  Lu  and  Chun-Wei  Chiu,  2011,  “Dynamic  modeling  of  a traveling-wave type ultrasonic motor with beam teeth via finite elements,” the ASME 2011 International  Design  Engineering  Technical  Conferences,  held  on  August  29-31,  2011, Washington, DC, USA. (EI Publication), Jun. 2013
2013  Paul C.-P. Chao*, Wei-Dar Chen and Chih-Kuo Chang, 2011, “Maximum Power Tracking of  a  Generic  Photovoltaic  System  via  a  Fuzzy  Controller  and  a  Two-Stage  DC-DC Converter,”  The  21th  Annual  ASME  Conference  on  Information  Storage  and  Processing Systems,  held  on  June  13-14,  2011  at  the  Santa  Clara University  in  California.  (EI Publication), Jun. 2013
2013  T.  C.  Chan,  C.-K.  Sung  and  Paul  C.-P.  Chao  “Friction  effect  on  ball  positioning  of  an automatic  balancer  in  optical  disk  drives,”  The  21th  Annual  ASME  Conference  on Information Storage and Processing Systems, held on June 13-14, 2011 at the Santa Clara University in California. (EI Publication), Jun. 2013
2013  Che-Hung  Tsai  and  Paul  C.-P.  Chao*,  2011  “Optimal  Design  of  ITO/organic  Photonic Crystals in Polymer Light-emitting Diodes with Sidewall Reflectors for High Efficiency,” The 21th Annual ASME Conference on Information Storage and Processing Systems, held on June 13-14, 2011 at the Santa Clara University in California. (EI Publication) , Jun. 2013
2013  Paul  C.-P.  Chao*  and  Chun-Wei  Chiu,  2011,  “Design  and  Experimental  Validation  of  a Sliding-Mode  Stabilizer  for  a  Ship-Carried  Satellite  Antenna,”  The  21th  Annual  ASME Conference on Information Storage and Processing Systems, held on June 13-14, 2011 at the Santa Clara University in California. (EI Publication) , Jun. 2013
2013 Chao-Jui  Hsu  and  Paul  C.  -P.  Chao,  2011,  “A  Negative  Liquid-Crystal  Lens  with Multi-Ring Electrodes in Unequal Widths   ,” SID Digest, 42 5, The Conference of Society of Information Display, 2011 in LA, CA, USA, May 15 – 20, 2011. (EI Publication). , Jun. 2013
2013  Tse-Yi Tu and Paul C.-P. Chao*, 2011, “A New Liquid Crystal Lens with Axis-Tunability via Three Sector Electrodes,” The 21th Annual ASME Conference on Information Storage and  Processing  Systems,  held  on  June  13-14,  2011  at  the  Santa  Clara  University  in California. (EI Publication), Jun. 2013
2013  Tzu-Fan  Huang,  Yung-Yuan  Kao,  and  Paul  C.  -P.  Chao,  “Tracking  Hand-gestures  with Depth  Detection  for  a  3D  Interactive  Display,”  SID  Digest,  42  1830,  The  Conference  of Society  of  Information  Display,  2011  in  LA,  CA,  USA,  May  15  –  20,  2011.  (EI Publication)., Jun. 2013
2013 Yung-Yuan  Kao  and  Paul  C.  -P.  Chao,  “Sizing  Multi-electrodes  in  an  LCL-lens  for Minimizing  the  Crosstalk  in  a  3D  Auto-stereoscopic  Display,”  SID  Digest,  42  13,  The Conference of Society of Information Display, 2011 in LA, CA, USA, May 15 – 20, 2011. (EI Publication). , Jun. 2013
2013 Kuei-Yu  Lee,  Jui-Hsin  Chang,  Paul  C.  -P.  Chao,  Chiu-Hao  Chen,  Zon-Tim  Tsai, Hong-Shen Lin, Lee-Hsun Chang, and Yu-Sin Lin, “Realizing a New Pixel Circuit Design for Alleviating OLED Degradation in a 2.4 Inch AMOLED Panel,” SID Digest, 42 1173, The  Conference  of  Society  of  Information  Display,  2011  in  LA,  CA, USA,  May  15  –  20, 2011. (EI Publication). , Jun. 2013
2013 Yu-Han  Chen,  Paul  C.-P.  Chao,  Che-Hung  Tsai  and  Wei-Dar  Chen,  "Design  and Development  of  a  New  Two-DOF  Rotational  Optical  Image  Stabilizer, "Proceedings  of 2011 8th Asian Control Conference (ASCC), pp. 775-760, Kaohsiung, Taiwan, May 15-18, 2011., Jun. 2013
2013 Tzu-Chia  Huang,  Fu-Ming  Hsu,  Paul  C.-P.  Chao*,  2011,  “An  Energy  Harvesting  System with  a  Novel  Rectifier  Charge  Pump,”  2011  IEEE  Sensors Conference,  Vol.  1-3, Limerick, Ireland, Oct. 2011. (SCI Publication) , Jun. 2013
2012 Bing-Ze Xue, Paul C.-P. Chao * , Bor-Shyh Lin   , Chun-Yin Tsai, Tsung-Lin Chen, Hsin-Hao Liao, Hann-Huei  Tsai,  Ying-Zong  Juang,  2011,  “A  Novel  Gas  Sensor  in  the  Form  of Micro-machined Resonator and its Readout Circui,” 2011 IEEE Sensors Conference, Vol. 1-3, Limerick, Ireland, Oct. 2011. (SCI Publication) , Jan. 2012
2011 Paul C.-P. Chao J.-Y. Shen and J.-S. Huang, 2008, “Precision Positioning of a Three-axis Optical Pickup via a Double Phase-Lead Compensator Equipped with Auto-tuned Parameters,” The 17th Annual ASME Conference on Information Storage and Processing Systems, held on June 16-17, 2008 at the Santa Clara University in California. (EI Publication), Aug. 2011
2011 Paul C.-P. Chao J.-Y. Shen and J.-S. Huang, 2008, “Precision Positioning of a Three-axis Optical Pickup via a Double Phase-Lead Compensator Equipped with Auto-tuned Parameters,” The 17th Annual ASME Conference on Information Storage and Processing Systems, held on June 16-17, 2008 at the Santa Clara University in California. (EI Publication), Aug. 2011
2011 Chun-Yin Tsai, Chi-Wei Chiu and Paul C.-P. Chao*, 2008, “Reliable hybrid fabrication processes for high sensitivity MEMS microphone,” The 34th International Conference on Micro and Nano Engineering, Hilton Athens, Greece, Sep. 15-18, 2008., Aug. 2011
2011 Paul C.-P. Chao*, Lun-De Liao, Tsung-Shien Lu, Chien-Wei Liu and Chi-Wei Chiu, 2008, “Design and Fabrication of a Low-Stress Membrane for Microphones via Low Temperature Processes,” The 34th International Conference on Micro and Nano Engineering, Hilton Athens, Greece, Sep. 15-18, 2008., Aug. 2011
2011 Lun-De Liao, Paul C.-P. Chao*, Chi-Wei Chiu, Yu-Jhu Lin, Shaou-Gang Miaou, Ming Chang and Jeng-Sheng Huang, 2008, “Precision Nano-machining in a Scanning Electron Microscope by Run-to-Run Control Based on Image Feedbacks,” The 34th International Conference on Micro and Nano Engineering, Hilton Athens, Greece, Sep. 15-18, 2008., Aug. 2011
2011 T. C. Chan, C. K. Sung, Chang-Po Chao and Chun-Lung Huang, "A Study on the Performance of ABB Influenced by Rolling Friction," China Society for Mechanical Engineering 25th Conference, Taiwan, R.O.C., Nov. 22-23, 2008., Aug. 2011
2011 Tse-Yi Tu , Paul C.-P. Chao*, Chi-Wei Chiu , Chun-Chieh Wang , Jeng-Sheng Huang, 2008, “Fuzzy Control Design of a Magnetically-Actuated Optical Image Stabilizer with Hystersis Compensation,” The 53th Magnetism and Magnetic Materials conference held in Austin, Texas on November 10-14, 2008. (EI Publication), Aug. 2011
2011 Yung-Yuan Kao , Paul C.-P. Chao*, Chang-Chun Chang , Jeng-Sheng Huang, 2008, “Performance Prediction of a Small-sized Herringbone-grooved Bearing with Ferro-fluid Lubrication Considering Cavitation,” The 53th Magnetism and Magnetic Materials conference held in Austin, Texas on November 10-14, 2008. (EI Publication), Aug. 2011
2011 Jiun-De Li, Lun-De Liao, Tse-yi Tu, Chi-Wei Chiu, Paul C.-P. Chao, 2009, “Optimize Placement Angles of RGB LEDs for Backlight Module by Genetic Algorithm,” International conference on Optics and Photonics in Taipei, Taiwan, Dec 5 – 6, 2008. (EI Publication), Aug. 2011
2011

Yi-Ling Yang, Paul C.-P. Chao, C.-K. Sung, 2009, “Landing Posture Control via Trajectory Planning for a Generalized Twin-body System,” The 4th International Conference on Autonomous Robots and Agent, in Wellington, New Zealand, Feb 10 – 12., 2009. (EI Publication)

, Aug. 2011
2011 Lun-De Liao, Paul C.-P. Chao, Yi-Shiun Luo, Hsin-Fei Meng, Chin-Teng Lin, 2009, “Achieving High Directionality and Extraction of Light Emission from Polymer Light Emit-ting Diodes via ITO/Organic Photonic Crystals,” SID Digest, The Conference of Society of Information Display, 2009 in San Antonio, Texas, USA, May 31 – June 5, 2009. (EI Publication), Aug. 2011
2011 Yung-Yuan Kao, Yan-Pean Huang, Kai-Xian Yang and Paul C.-P. Chao, 2009, “An Auto-Stereoscopic 3D Display Using Tunable Liquid Crystal Lens Array that Mimics Effects of GRIN Lenticular Lens Array,” SID Digest, The Conference of Society of Information Display, 2009 in San Antonio, Texas, USA, May 31 – June 5, 2009. (EI Publication), Aug. 2011
2011 Lun-De Liao, Paul C.-P. Chao, Jian-Ting Chen, Wei-Dar Chen, Wei-Hsuan Hsu, Chi-Wei Chiu and Chin-Teng Lin, 2009, “A Miniaturized Electromagnetic Generator with Planar Coils and Its Energy Harvest Circuit,” The Intermag Conference held in Sacramento, California, on May 4-8, 2009. (EI Publication), Aug. 2011
2011 Tzu Chi Chan, C. K. Sung, Paul C.-P. Chao and Y. M. Hung, “Effects of rolling friction on Ball Positioning for an Automatic Ball Balancer,” The ASME 2009 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Oct. 30-Sep. 2, San Diego, CA, USA. (EI Publication), Aug. 2011
2011 C. X. Lu, C. C. Wang, C. K. Sung and Paul C.-P. Chao, 2009, “Dynamic analysis of a motion transformer mimicking a hula hoop,” The ASME 2009 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Oct. 30-Sep. 2, San Diego, CA, USA. (EI Publication), Aug. 2011
2011

Lun-De Liao, Wei-Huesh Hsu, Paul C.-P. Chao and Yan-Pean Huang, 2009, “Development of an On-line Digital Optical Bench Tester with Conoscopy for Lens Quality Evaluation,” 2009 JSME-IIP/ASME-ISPS Joint Conference on Micromechatronics for Information and Precision Equipment, June 17-20, 2009, Tsukuba International Congress Center, Ibaraki, Japan. (EI Publication)

, Aug. 2011
2011 32. Prof SK Lin’s Conference paper, Aug. 2011
2011 Lun-De Liao, Paul C.-P. Chao, Bor-Shyh Lin, Ming-Hsiu Chung, Arch W.-G. Sun, Shia-Chung Chen, Li-Wei Ko, Chin-Teng Lin, 2009, “A Novel Flexible and Zero-Preparation Dry EEG Injection Molding Sensor (DEIMS),” 2009 IEEE Sensors Conference, Christ Church, New Zealand, Oct. 2009. (EI Publication), Aug. 2011
2011 Wei-Huesh Hsu and Paul C.-P. Chao, “An On-line Digital Optical Bench Tester for Evaluating Lens Quality,” The 14th North-East Asia Symposium on Nano, Information Technology and Reliability, Hsinchu, Taiwan, May 15, 2009., Aug. 2011
2011 Lun-De Liao and Paul C.-P. Chao, “Run-to-Run Control Based on Image Feedbacks for Precision Micro-/Nano- machining in a Scanning Electron Microscope,” The 14th North-East Asia Symposium on Nano, Information Technology and Reliability, Hsinchu, Taiwan, May 15, 2009., Aug. 2011
2011 Jian-Ting Chen and Paul C.-P. Chao, “A Micro-generator with Planar Coils and Its Energy Harvest Circuit,” The 14th North-East Asia Symposium on Nano, Information Technology and Reliability, Hsinchu, Taiwan, May 15, 2009., Aug. 2011
2011 Chieh-Wen Hsueh and Paul C.-P. Chao, “Novel Hole and Ring Electrodes to Achieve High Focusing Power for a Large-aperture Liquid Crystal Lens,” The 14th North-East Asia Symposium on Nano, Information Technology and Reliability, Hsinchu, Taiwan, May 15, 2009., Aug. 2011
2011 Chih-Kuo Chang and Paul C.-P. Chao, “Hybrid High Sensitivity MEMS Microphone Fabrication Processes,” The 14th North-East Asia Symposium on Nano, Information Technology and Reliability, Hsinchu, Taiwan, May 15, 2009., Aug. 2011
2011 Paul C.-P. Chao, Nicholas Y.-Y. Kao, K.-X. Yang, Y.-P. Huang, “3D Display Technology by Means of 2D-muiltiplexed Method Based on Electric-controlled Liquid-crystal-lens Array,” The CPT-NCTU research results conference, Hsinchu, Taiwan, July, 2009., Aug. 2011
2011 Che-Hung Tsai, Lun-De Liao, Paul C.-P. Chao, In-Chen Chen, Hsin-Fei Meng, Wei-Dar Chen, Shir-Kuan Lin and Chin-Teng Lin, “Optimal Design and Fabrication of ITO/Organic Photonic Crystals in Polymer Light Emitting Diodes using a Focused Ion Beam,” The 34th International Conference on Micro and Nano Engineering, Ghent, Belgium, Sep. 28-Oct. 1, 2009., Aug. 2011
2011 Hsin-Yi Lai, You-Yin Chen, Lun-De Liao, Wei-Yi Chuang and Paul C.-P. Chao, 2009, “Design and Experimental Validations of a Novel Flexible Neural Probe for Deep Brain Stimulation and Recording,” The 34th International Conference on Micro and Nano Engineering, Ghent, Belgium, Sep. 28-Oct. 1, 2009., Aug. 2011
2011 Y-Y. Chen, Y-J. Chang, P.C-P. Chao, S-W. Chen, K-C. Hung, P-Y. Zhou, K-M. Hung, Y-H. Kuo, M-Y. Tsai, TY. Pu, “Multi-electrode Arrays Chip Addressed by VCSEL Array System for Neural Recording,” The 34th International Conference on Micro and Nano Engineering, Ghent, Belgium, Sep. 28-Oct. 1, 2009., Aug. 2011
2011 Lun-De Liao, Paul C.-P. Chao, Yu-Jhu Lin, Chi-Wei Chiu, Shaou-Gang Miaou, Ming Chang and Jeng-Sheng Huang, “Precision Micro-/Nano- machining in a Scanning Electron Microscope by Run-to-Run Control Based on Image Feedbacks,” Best Student Paper Award of the Conference, The 16th Symposium on Nano-Device Technology, Apr, 2009, Hsinchu, Taiwan., Aug. 2011
2011 T. C. Chan, Cheng-Kuo Sung and Paul C.-P. Chao “Precision Ball Positioning of an Automatic Balancer System,” Best Paper Award of the Conference, The 12-th National Conference on Mechanism and Machine Theory, Nov., 2009, pp. 1-6, Chia-Yi, Taiwan., Aug. 2011
2011 Lun-De Liao, Paul C.-P. Chao, Bor-Shyh Lin, Ming-Hsiu Chung, Arch W.-G. Sun, Shia-Chung Chen, Li-Wei Ko and Chin-Teng Lin, “A Novel Flexible and Zero-Preparation Dry EEG Injection Molding Sensor (DEIMS),” Biomedical Engineering Society 2009 Annual Symposium, Dec. 11-12, 2009, National Yang-Ming University, Taipei, Taiwan., Aug. 2011
2011

Chi-Wei Chiu, Yu-Han Chen, Tzu-Fan Huang, Paul C.-P. Chao, 2010, “Robust and Optimal Design of a Novel Optical Image Stabilizer with the Capability of Suppressing Magnetic Torque Variations,” The 11th joint MMM-Intermag Conference, Jan 18-22, 2010, Washington DC, USA. (EI Publication)

, Aug. 2011
2011 Wei-Yi Chuang and Paul C.-P. Chao, 2010, “Adjusting Electrode Potentials to Compensate Thermal/Tissue Effects in Deep Brain Stimulation via Finite Element Electromagnetic Analysis,” The 11th joint MMM-Intermag Conference, Jan 18-22, 2010, Washington DC, USA. (EI Publication), Aug. 2011
2011 Lun-De Liao, Meng-Lin Lib, Hsin-Yi Lai, You-Yin Chen, Paul C.-P. Chao and Po-Hsun Wang, “In vivo functional photoacoustic micro-imaging of the electrically stimulated rat brain with multi-wavelengths,” the SPIE Symposium on SPIE BiOS: Biomedical Optics, Photons Plus Ultrasound: Imaging and Sensing 2010, 23-28 January 2010 at SPIE Photonics West in San Francisco, California, USA. (EI Publication), Aug. 2011
2011 Lun-De Liao, Paul C.-P. Chao, Bor-Shyh Lin, Ming-Hsiu Chung, Arch W.-G. Sun, Shia-Chung Chen, Li-Wei Ko, Chin-Teng Lin, 2009, “A Novel Flexible and Zero-Preparation Dry EEG Injection Molding Sensor (DEIMS),” 2010 IEEE Sensors Conferences, Christ Church, New Zealand, Oct. 2009. (EI Publication), Aug. 2011
2011 Lun-De Liao, Paul C.-P. Chao, Bor-Shyh Lin, Ming-Hsiu Chung, Arch W.-G. Sun, Shia-Chung Chen, Li-Wei Ko, Chin-Teng Lin, 2009, “A Novel Hybrid Bioelectrode Module for the Zero-Prep EEG Measurements,” 2009 IEEE Sensors Conference, Vol. 1-3, pp. 894-897, Christ Church, New Zealand, Oct. 2009. (SCI Publication), Aug. 2011
2011 Paul C.-P. Chao, Chao-Jui Hsu and Yung-Yuan Kao, 2010, “A Thin Multi-Ring Negative Liquid Crystal Lens Enabled by High-κ Dielectric Material,” The 20th Annual ASME Conference on Information Storage and Processing Systems, held on June 14-15, 2010 at the Santa Clara University in California. (EI Publication), Aug. 2011
2011 Yu-Han Chen, Paul C.-P. Chao*, Chi-Wei Chiu, Meng-Yen Tsai, Jyh-Yeong Chang and Shir-Kuan Lin, 2010, “A New Two-DOF Rotational Optical Image Stabilizer,” The 20th Annual ASME Conference on Information Storage and Processing Systems, held on June 14-15, 2010 at the Santa Clara University in California. (EI Publication, Best Paper Award), Aug. 2011
2011 Paul C.-P. Chao*, C. I. Shao, C. X. Lu and C. K. Sung, 2010, “A New Energy Harvest System with a Hula-Hoop Transformer, Micro-generator and Interface Energy-Harvesting Circuit,” The 20th Annual ASME Conference on Information Storage and Processing Systems, held on June 14-15, 2010 at the Santa Clara University in California. (EI Publication), Aug. 2011
2011 Paul C.-P. Chao*, Pen-Yen Liao and Meng-Yen Tsai, 2010, “Robust Control Design for Precision Positioning of a Generic Piezoelectric System with Consideration of Microscopic Hysteresis Effects,” The 20th Annual ASME Conference on Information Storage and Processing Systems, held on June 14-15, 2010 at the Santa Clara University in California. (EI Publication), Aug. 2011
2011

Y. Y. Kao, C. W. Chiu, and Paul P. C. Chao, 2010, “A DFLC Lens with Ring-and-Pie Electrodes and a New Driving Scheme to Minimize Response Time,” Proceedings of The fifth Asia-Pacific Conference on Transducers and Micro-Nano Technology, in Perth, Australia, July 6 – 9, 2010.

, Aug. 2011
2011 T. Y. Tu, C. W. Chiu, and Paul P. C. Chao, 2010, “Optical Design and Fabrication of the Tunable-axis Liquid Crystal Lens,” Proceedings of The fifth Asia-Pacific Conference on Transducers and Micro-Nano Technology, in Perth, Australia, July 6 – 9, 2010.., Aug. 2011
2011 Kuei-Yu Lee, Jui-Hsin Chang, Paul C.-P. Chao and Fang-Chung Chen, 2010, “A new driving pixel circuit to alleviate AMOLED degradation,” SID Digest, The Conference of Society of Information Display, 2010 in Seattle, WA, USA, May 23 – 28, 2010. (EI Publication)., Aug. 2011
2011 Yung-Yuan Kao, Paul C.-P. Chao and Yan-Pean Huang, "A LC Lenticular Lens Array with Staggered Electrodes for WXGA LCD in Applications of Auto-Stereoscopic 3D Display," The Micro-optics Conference 2010, Hsinchu, Taiwan, October 31 – Nov 3, 2010., Aug. 2011
2011 Yu-Han Chen, Paul C.-P. Chao and Chi-Wei Chiu, "Optimal Design and Realization of a Novel Optical Image Stabilizer," The Micro-optics Conference 2010, Hsinchu, Taiwan, October 31 – Nov 3, 2010., Aug. 2011
2011 Chao-Jui Hsu, Yung-Yuan Kao and Paul C.-P. Chao*, "An Liquid Crystal Negative Lens with Unequal Width Electrodes," The Micro-optics Conference 2010, Hsinchu, Taiwan, October 31 – Nov 3, 2010., Aug. 2011
2011 Juan-Yao Ruan, Paul C.-P. Chao and Wei-Dar Chen, 2010, “A Multi-Touch Interface Circuit for a Large-Sized Capacitive Touch Panel,” 2010 IEEE Sensors Conference, Vol. 1-3, pp. 309-314, Waikoloa, Big Island, Hawaii, USA, Nov. 2010. (SCI Publication), Aug. 2011
2011 Tzu-Yang Lin, Paul C.-P. Chao, Wei-Dar Chen, and Che-Hung Tsai, 2010, “A Novel 3D Optical Proximity Sensor Panel and its Readout Circuit,” 2010 IEEE Sensors Conference, Vol. 1-3, pp. 108-113, Waikoloa, Big Island, Hawaii, USA, Nov. 2010. (SCI Publication), Aug. 2011
2011 WY’s paper, Aug. 2011
2009 Chun-Chieh Wang, Cheng-Kuo Sung, and Paul C. P. Chao, “Dynamic analysis of the optical disk derive system equipped with an automatic ball balancer with consideration of torsional motion,” ASME 2003 International Design Engineering Technical Conference, 19th Biennial conference on Mechanical Vibration and Noise, Sept., 2003, DETC2003/VIB48407, Chicago, USA. (EI Publication)

, Feb. 2009" href="/en/research/Conference_Papers/Chun-Chieh-Wang-Cheng-Kuo-Sung-and-Paul-C-P-Chao-“Dynamic-analysis-of-the-optical-disk-derive-system-equipped-with-an-automatic-ball-balancer-with-consideration-of-torsional-motion-”-ASME-2003-International-Design-Engineering-Technical-Conference-19th-Biennial-conference-on-Mechanical-Vibration-and-Noise-Sept-2003-DETC2003-VIB48407-Chicago-USA-EI-Publication-80995502" target="_blank">

Chun-Chieh Wang, Cheng-Kuo Sung, and Paul C. P. Chao, “Dynamic analysis of the optical disk derive system equipped with an automatic ball balancer with consideration of torsional motion,” ASME 2003 International Design Engineering Technical Conference, 19th Biennial conference on Mechanical Vibration and Noise, Sept., 2003, DETC2003/VIB48407, Chicago, USA. (EI Publication)

, Feb. 2009
2009 Chun-Chieh Wang, Cheng-Kuo Sung, and Paul C. P. Chao, “Dynamic analysis of the optical disk derive system equipped with an automatic ball balancer with consideration of torsional motion,” ASME 2003 International Design Engineering Technical Conference, 19th Biennial conference on Mechanical Vibration and Noise, Sept., 2003, DETC2003/VIB48407, Chicago, USA. (EI Publication)

, Feb. 2009" href="/en/research/Conference_Papers/Chun-Chieh-Wang-Cheng-Kuo-Sung-and-Paul-C-P-Chao-“Dynamic-analysis-of-the-optical-disk-derive-system-equipped-with-an-automatic-ball-balancer-with-consideration-of-torsional-motion-”-ASME-2003-International-Design-Engineering-Technical-Conference-19th-Biennial-conference-on-Mechanical-Vibration-and-Noise-Sept-2003-DETC2003-VIB48407-Chicago-USA-EI-Publication-77930094" target="_blank">

Chun-Chieh Wang, Cheng-Kuo Sung, and Paul C. P. Chao, “Dynamic analysis of the optical disk derive system equipped with an automatic ball balancer with consideration of torsional motion,” ASME 2003 International Design Engineering Technical Conference, 19th Biennial conference on Mechanical Vibration and Noise, Sept., 2003, DETC2003/VIB48407, Chicago, USA. (EI Publication)

, Feb. 2009
2009 Paul C. P. Chao, J. S. Huang and H. C. Tseng, “Dynamic Finite Element Analysis of a Piezoeletric Bimorph Beam Deflector with Consideration of Hysteresis Effect,” ASME 2003 International Design Engineering Technical Conference, 19th Biennial conference on Mechanical Vibration and Noise, Sept., 2003, DETC2003/VIB48528, Chicago, USA. (EI Publication)

, Feb. 2009" href="/en/research/Conference_Papers/Paul-C-P-Chao-J-S-Huang-and-H-C-Tseng-“Dynamic-Finite-Element-Analysis-of-a-Piezoeletric-Bimorph-Beam-Deflector-with-Consideration-of-Hysteresis-Effect-”-ASME-2003-International-Design-Engineering-Technical-Conference-19th-Biennial-conference-on-Mechanical-Vibration-and-Noise-Sept-2003-DETC2003-VIB48528-Chicago-USA-EI-Publication-42849806" target="_blank">

Paul C. P. Chao, J. S. Huang and H. C. Tseng, “Dynamic Finite Element Analysis of a Piezoeletric Bimorph Beam Deflector with Consideration of Hysteresis Effect,” ASME 2003 International Design Engineering Technical Conference, 19th Biennial conference on Mechanical Vibration and Noise, Sept., 2003, DETC2003/VIB48528, Chicago, USA. (EI Publication)

, Feb. 2009
2009 Paul C. P. Chao, J. S. Huang and H. C. Tseng, “Dynamic Finite Element Analysis of a Piezoeletric Bimorph Beam Deflector with Consideration of Hysteresis Effect,” CSME 20-th National Conference of Mechanical Engineering, Dec., 2003, Taipei, Taiwan.

, Feb. 2009" href="/en/research/Conference_Papers/Paul-C-P-Chao-J-S-Huang-and-H-C-Tseng-“Dynamic-Finite-Element-Analysis-of-a-Piezoeletric-Bimorph-Beam-Deflector-with-Consideration-of-Hysteresis-Effect-”-CSME-20-th-National-Conference-of-Mechanical-Engineering-Dec-2003-Taipei-Taiwan-41552412" target="_blank">

Paul C. P. Chao, J. S. Huang and H. C. Tseng, “Dynamic Finite Element Analysis of a Piezoeletric Bimorph Beam Deflector with Consideration of Hysteresis Effect,” CSME 20-th National Conference of Mechanical Engineering, Dec., 2003, Taipei, Taiwan.

, Feb. 2009
2009 Chun-Chieh Wang, Cheng-Kuo Sung, and Paul C. P. Chao, “Measurement system for the vibrations of an optical disc drive equipped with the automatic balancer system,” NIDAYS conference, March., 2003, pp. 1-7, Taipei, Taiwan., Feb. 2009" href="/en/research/Conference_Papers/Chun-Chieh-Wang-Cheng-Kuo-Sung-and-Paul-C-P-Chao-“Measurement-system-for-the-vibrations-of-an-optical-disc-drive-equipped-with-the-automatic-balancer-system-”-NIDAYS-conference-March-2003-pp-1-7-Taipei-Taiwan-59910633" target="_blank">Chun-Chieh Wang, Cheng-Kuo Sung, and Paul C. P. Chao, “Measurement system for the vibrations of an optical disc drive equipped with the automatic balancer system,” NIDAYS conference, March., 2003, pp. 1-7, Taipei, Taiwan., Feb. 2009
2009 Ben-Cheng Yo, Cheng-Kuo Sung, and Paul C. P. Chao, “The effects of nonlinear suspension on the dynamic performance of the automatic ball balancer,” The 7-th National Conference on Mechanism and Machine Theory, Nov., 2004, pp. 1-6, Tainan, Taiwan.

, Feb. 2009" href="/en/research/Conference_Papers/Ben-Cheng-Yo-Cheng-Kuo-Sung-and-Paul-C-P-Chao-“The-effects-of-nonlinear-suspension-on-the-dynamic-performance-of-the-automatic-ball-balancer-”-The-7-th-National-Conference-on-Mechanism-and-Machine-Theory-Nov-2004-pp-1-6-Tainan-Taiwan-8944947" target="_blank">

Ben-Cheng Yo, Cheng-Kuo Sung, and Paul C. P. Chao, “The effects of nonlinear suspension on the dynamic performance of the automatic ball balancer,” The 7-th National Conference on Mechanism and Machine Theory, Nov., 2004, pp. 1-6, Tainan, Taiwan.

, Feb. 2009
2009 Paul C.-P. Chao, Cheng-Kuo Sung, Hui-Chung Leu, and Chi-Wei Chiu, “The Dynamic Effect of Rolling Resistance of the Balancing Ball on the Performance of Automatic Ball Balancer,” Eleventh International Congress on Sound and Vibration (ICSV11), July, 2004, St. Pertersburg, Russia, pp.2711-2718.

, Feb. 2009" href="/en/research/Conference_Papers/Paul-C-P-Chao-Cheng-Kuo-Sung-Hui-Chung-Leu-and-Chi-Wei-Chiu-“The-Dynamic-Effect-of-Rolling-Resistance-of-the-Balancing-Ball-on-the-Performance-of-Automatic-Ball-Balancer-”-Eleventh-International-Congress-on-Sound-and-Vibration-ICSV11-July-2004-St-Pertersburg-Russia-pp-2711-2718-46554225" target="_blank">

Paul C.-P. Chao, Cheng-Kuo Sung, Hui-Chung Leu, and Chi-Wei Chiu, “The Dynamic Effect of Rolling Resistance of the Balancing Ball on the Performance of Automatic Ball Balancer,” Eleventh International Congress on Sound and Vibration (ICSV11), July, 2004, St. Pertersburg, Russia, pp.2711-2718.

, Feb. 2009
2009 Paul C.-P. Chao, Cheng-Kuo Sung, Hui-Chung Leu, and Chi-Wei Chiu, “The Dynamic Effect of Rolling Resistance of the Balancing Ball on the Performance of Automatic Ball Balancer,” Eleventh International Congress on Sound and Vibration (ICSV11), July, 2004, St. Pertersburg, Russia, pp.2711-2718.

, Feb. 2009" href="/en/research/Conference_Papers/Paul-C-P-Chao-Cheng-Kuo-Sung-Hui-Chung-Leu-and-Chi-Wei-Chiu-“The-Dynamic-Effect-of-Rolling-Resistance-of-the-Balancing-Ball-on-the-Performance-of-Automatic-Ball-Balancer-”-Eleventh-International-Congress-on-Sound-and-Vibration-ICSV11-July-2004-St-Pertersburg-Russia-pp-2711-2718-63761590" target="_blank">

Paul C.-P. Chao, Cheng-Kuo Sung, Hui-Chung Leu, and Chi-Wei Chiu, “The Dynamic Effect of Rolling Resistance of the Balancing Ball on the Performance of Automatic Ball Balancer,” Eleventh International Congress on Sound and Vibration (ICSV11), July, 2004, St. Pertersburg, Russia, pp.2711-2718.

, Feb. 2009
2009 Paul C.-P. Chao, Jeng-Sheng Huang and Po-Wen Liu, “Calculating Rotordynamic Coefficients of a Ferrofluid-Lubricated and Herringbone-Grooved Journal Bearing via Finite Difference Analysis.” ASME/STLE International Joint Tribology Conference, Oct. 2004, California, U. S. A., TRIB2004-64282. (EI Publication)

, Feb. 2009" href="/en/research/Conference_Papers/Paul-C-P-Chao-Jeng-Sheng-Huang-and-Po-Wen-Liu-“Calculating-Rotordynamic-Coefficients-of-a-Ferrofluid-Lubricated-and-Herringbone-Grooved-Journal-Bearing-via-Finite-Difference-Analysis-”-ASME-STLE-International-Joint-Tribology-Conference-Oct-2004-California-U-S-A-TRIB2004-64282-EI-Publication-54924793" target="_blank">

Paul C.-P. Chao, Jeng-Sheng Huang and Po-Wen Liu, “Calculating Rotordynamic Coefficients of a Ferrofluid-Lubricated and Herringbone-Grooved Journal Bearing via Finite Difference Analysis.” ASME/STLE International Joint Tribology Conference, Oct. 2004, California, U. S. A., TRIB2004-64282. (EI Publication)

, Feb. 2009
2009  Paul C.-P. Chao, Cheng-Kuo Sung, Hui-Chung Leu and Chi-Wei Chiu, “Effects of Rolling Friction of the Balancing Balls on the Automatic Ball Balancer for Optical Disk Drives,” ASME/STLE International Joint Tribology Conference, Oct. 2004, California, U. S. A., TRIB2004-64275. (EI Publication) , Feb. 2009" href="/en/research/Conference_Papers/ Paul-C-P-Chao-Cheng-Kuo-Sung-Hui-Chung-Leu-and-Chi-Wei-Chiu-“Effects-of-Rolling-Friction-of-the-Balancing-Balls-on-the-Automatic-Ball-Balancer-for-Optical-Disk-Drives-”-ASME-STLE-International-Joint-Tribology-Conference-Oct-2004-California-U-S-A-TRIB2004-64275-EI-Publication-22112991" target="_blank"> Paul C.-P. Chao, Cheng-Kuo Sung, Hui-Chung Leu and Chi-Wei Chiu, “Effects of Rolling Friction of the Balancing Balls on the Automatic Ball Balancer for Optical Disk Drives,” ASME/STLE International Joint Tribology Conference, Oct. 2004, California, U. S. A., TRIB2004-64275. (EI Publication) , Feb. 2009
2009 Ben-Cheng Yo, Cheng-Kuo Sung, and Paul C. P. Chao, “The effects of nonlinear suspension on the dynamic performance of the automatic ball balancer,” The 7-th National Conference on Mechanism and Machine Theory, Nov., 2004, pp. 1-6, Tainan, Taiwan.

, Feb. 2009" href="/en/research/Conference_Papers/Ben-Cheng-Yo-Cheng-Kuo-Sung-and-Paul-C-P-Chao-“The-effects-of-nonlinear-suspension-on-the-dynamic-performance-of-the-automatic-ball-balancer-”-The-7-th-National-Conference-on-Mechanism-and-Machine-Theory-Nov-2004-pp-1-6-Tainan-Taiwan-16033080" target="_blank">

Ben-Cheng Yo, Cheng-Kuo Sung, and Paul C. P. Chao, “The effects of nonlinear suspension on the dynamic performance of the automatic ball balancer,” The 7-th National Conference on Mechanism and Machine Theory, Nov., 2004, pp. 1-6, Tainan, Taiwan.

, Feb. 2009
2009 Paul C.-P. Chao, Jeng-Sheng Huang, Chi-Wei Chiu and Chien-Yu Shen, “Design and experimental study of an observer-based controller for three-DOF four-wire-type optical pickup,” CSME 21-th National Conference of Mechanical Engineering, Dec., 2004, pp. 1353-1359, Taipei, Taiwan.

, Feb. 2009" href="/en/research/Conference_Papers/Paul-C-P-Chao-Jeng-Sheng-Huang-Chi-Wei-Chiu-and-Chien-Yu-Shen-“Design-and-experimental-study-of-an-observer-based-controller-for-three-DOF-four-wire-type-optical-pickup-”-CSME-21-th-National-Conference-of-Mechanical-Engineering-Dec-2004-pp-1353-1359-Taipei-Taiwan-18466365" target="_blank">

Paul C.-P. Chao, Jeng-Sheng Huang, Chi-Wei Chiu and Chien-Yu Shen, “Design and experimental study of an observer-based controller for three-DOF four-wire-type optical pickup,” CSME 21-th National Conference of Mechanical Engineering, Dec., 2004, pp. 1353-1359, Taipei, Taiwan.

, Feb. 2009
2009 Jeng-Sheng Huang and Paul C.-P. Chao, Chi-Wei Chiu and J. Y. Wu-Chi, “Dynamic Formulation and Experimental Verification of a Piezo-Feeder,” The 28-th National Conference on Theoretical and Applied Mechanics, Dec., 2004, pp. 2136-2143, Taipei, Taiwan.

 

, Feb. 2009" href="/en/research/Conference_Papers/Jeng-Sheng-Huang-and-Paul-C-P-Chao-Chi-Wei-Chiu-and-J-Y-Wu-Chi-“Dynamic-Formulation-and-Experimental-Verification-of-a-Piezo-Feeder-”-The-28-th-National-Conference-on-Theoretical-and-Applied-Mechanics-Dec-2004-pp-2136-2143-Taipei-Taiwan-  -33237639" target="_blank">Jeng-Sheng Huang and Paul C.-P. Chao, Chi-Wei Chiu and J. Y. Wu-Chi, “Dynamic Formulation and Experimental Verification of a Piezo-Feeder,” The 28-th National Conference on Theoretical and Applied Mechanics, Dec., 2004, pp. 2136-2143, Taipei, Taiwan.

 

, Feb. 2009
2009  Paul C.-P. Chao, Jeng-Sheng Huang, Chi-Wei Chiu and Chien-Yu Shen, “Design and experimental study of an observer-based controller for three-DOF four-wire-type optical pickup,” in proc. of American Control Conference, 2005, Portland, Oregon, USA. (EI Publication)

, Feb. 2009" href="/en/research/Conference_Papers/ Paul-C-P-Chao-Jeng-Sheng-Huang-Chi-Wei-Chiu-and-Chien-Yu-Shen-“Design-and-experimental-study-of-an-observer-based-controller-for-three-DOF-four-wire-type-optical-pickup-”-in-proc-of-American-Control-Conference-2005-Portland-Oregon-USA-EI-Publication-61055410" target="_blank">

 Paul C.-P. Chao, Jeng-Sheng Huang, Chi-Wei Chiu and Chien-Yu Shen, “Design and experimental study of an observer-based controller for three-DOF four-wire-type optical pickup,” in proc. of American Control Conference, 2005, Portland, Oregon, USA. (EI Publication)

, Feb. 2009
2009 Paul C.-P. Chao, Jeng-Sheng Huang, Chi-Wei Chiu and J. Y. Wu-Chi, “Dynamic Modeling and Experimental Verification of a parallel-beam piezo-feeder,” in proc. of ASME 2005 International Design Engineering Technical Conference, 20th Biennial conference on Mechanical Vibration and Noise, Sept., 2005, Long Beach, CA, USA. (EI Publication)

, Feb. 2009" href="/en/research/Conference_Papers/Paul-C-P-Chao-Jeng-Sheng-Huang-Chi-Wei-Chiu-and-J-Y-Wu-Chi-“Dynamic-Modeling-and-Experimental-Verification-of-a-parallel-beam-piezo-feeder-”-in-proc-of-ASME-2005-International-Design-Engineering-Technical-Conference-20th-Biennial-conference-on-Mechanical-Vibration-and-Noise-Sept-2005-Long-Beach-CA-USA-EI-Publication-60532557" target="_blank">

Paul C.-P. Chao, Jeng-Sheng Huang, Chi-Wei Chiu and J. Y. Wu-Chi, “Dynamic Modeling and Experimental Verification of a parallel-beam piezo-feeder,” in proc. of ASME 2005 International Design Engineering Technical Conference, 20th Biennial conference on Mechanical Vibration and Noise, Sept., 2005, Long Beach, CA, USA. (EI Publication)

, Feb. 2009
2009 Paul C.-P. Chao, Cheng-Kuo Sung and Ben-Cheng Yo, “Effects of nonlinear washers on the automatic ball balancer for optical disk drives,” in proc. of ASME 2005 International Design Engineering Technical Conference, 20th Biennial conference on Mechanical Vibration and Noise, Sept., 2005, Long Beach, CA, USA. (EI Publication), Feb. 2009" href="/en/research/Conference_Papers/Paul-C-P-Chao-Cheng-Kuo-Sung-and-Ben-Cheng-Yo-“Effects-of-nonlinear-washers-on-the-automatic-ball-balancer-for-optical-disk-drives-”-in-proc-of-ASME-2005-International-Design-Engineering-Technical-Conference-20th-Biennial-conference-on-Mechanical-Vibration-and-Noise-Sept-2005-Long-Beach-CA-USA-EI-Publication-73222852" target="_blank">Paul C.-P. Chao, Cheng-Kuo Sung and Ben-Cheng Yo, “Effects of nonlinear washers on the automatic ball balancer for optical disk drives,” in proc. of ASME 2005 International Design Engineering Technical Conference, 20th Biennial conference on Mechanical Vibration and Noise, Sept., 2005, Long Beach, CA, USA. (EI Publication), Feb. 2009
2009 Paul C.-P. Chao and Chi-Wei Chiu, “Nonlinear dynamic analysis on the MEMS microphones,” in proc. of 2005 ASME International Mechanical Engineering Congress and Exposition, Nov.., 2005, Orlando, FL, USA. (EI Publication)

, Feb. 2009" href="/en/research/Conference_Papers/Paul-C-P-Chao-and-Chi-Wei-Chiu-“Nonlinear-dynamic-analysis-on-the-MEMS-microphones-”-in-proc-of-2005-ASME-International-Mechanical-Engineering-Congress-and-Exposition-Nov-2005-Orlando-FL-USA-EI-Publication-74080222" target="_blank">

Paul C.-P. Chao and Chi-Wei Chiu, “Nonlinear dynamic analysis on the MEMS microphones,” in proc. of 2005 ASME International Mechanical Engineering Congress and Exposition, Nov.., 2005, Orlando, FL, USA. (EI Publication)

, Feb. 2009
2009 Paul C.-P. Chao* and Pen-Yen Liao, “A Novel Microscopic Modeling on Hysteresis Effects of Piezoelectric Structures with Assistance from Finite Elements,” in proc. of El-Naschie Symposium on Nonlinear Dynamics, December 20-21, 2005, Shanghai, China.

, Feb. 2009" href="/en/research/Conference_Papers/Paul-C-P-Chao-and-Pen-Yen-Liao-“A-Novel-Microscopic-Modeling-on-Hysteresis-Effects-of-Piezoelectric-Structures-with-Assistance-from-Finite-Elements-”-in-proc-of-El-Naschie-Symposium-on-Nonlinear-Dynamics-December-20-21-2005-Shanghai-China-70388804" target="_blank">

Paul C.-P. Chao* and Pen-Yen Liao, “A Novel Microscopic Modeling on Hysteresis Effects of Piezoelectric Structures with Assistance from Finite Elements,” in proc. of El-Naschie Symposium on Nonlinear Dynamics, December 20-21, 2005, Shanghai, China.

, Feb. 2009
2009 Paul C.-P. Chao*, Ben-Cheng Yo and Cheng-Kuo Sung, “ Nonlinear Dynamic Effects of Damping Washers on the Performance of Automatic Ball Balancers in Optical Disc Drives,” in proc. of El-Naschie Symposium on Nonlinear Dynamics, December 20-21, 2005, Shanghai, China.

, Feb. 2009" href="/en/research/Conference_Papers/Paul-C-P-Chao-Ben-Cheng-Yo-and-Cheng-Kuo-Sung-“-Nonlinear-Dynamic-Effects-of-Damping-Washers-on-the-Performance-of-Automatic-Ball-Balancers-in-Optical-Disc-Drives-”-in-proc-of-El-Naschie-Symposium-on-Nonlinear-Dynamics-December-20-21-2005-Shanghai-China-58585283" target="_blank">

Paul C.-P. Chao*, Ben-Cheng Yo and Cheng-Kuo Sung, “ Nonlinear Dynamic Effects of Damping Washers on the Performance of Automatic Ball Balancers in Optical Disc Drives,” in proc. of El-Naschie Symposium on Nonlinear Dynamics, December 20-21, 2005, Shanghai, China.

, Feb. 2009
2009  Jeng-Sheng Huang and Paul C.-P. Chao, Chi-Wei Chiu and J. Y. Wu-Chi, “Dynamic Formulation and Experimental Verification of a Piezo-Feeder,” The 29-th National Conference on Theoretical and Applied Mechanics, pp. M029-1-8, Dec., 2005, Hsinchu, Taiwan.

, Feb. 2009" href="/en/research/Conference_Papers/ Jeng-Sheng-Huang-and-Paul-C-P-Chao-Chi-Wei-Chiu-and-J-Y-Wu-Chi-“Dynamic-Formulation-and-Experimental-Verification-of-a-Piezo-Feeder-”-The-29-th-National-Conference-on-Theoretical-and-Applied-Mechanics-pp-M029-1-8-Dec-2005-Hsinchu-Taiwan-28169231" target="_blank">

 Jeng-Sheng Huang and Paul C.-P. Chao, Chi-Wei Chiu and J. Y. Wu-Chi, “Dynamic Formulation and Experimental Verification of a Piezo-Feeder,” The 29-th National Conference on Theoretical and Applied Mechanics, pp. M029-1-8, Dec., 2005, Hsinchu, Taiwan.

, Feb. 2009
2009  Paul C.-P. Chao* and Chi-Wei Chiu, “ Paul C.-P. Chao* and Pen-Yen Liao, “Experiment validation of an observer-based ball re-positioning scheme for an auto-balancer system of DVD-ROMs,” in proc. of The 25th IASTED international conference on modeling, identification and control, Feb, 2006, Spain. (EI Publication)

, Feb. 2009" href="/en/research/Conference_Papers/ Paul-C-P-Chao-and-Chi-Wei-Chiu-“-Paul-C-P-Chao-and-Pen-Yen-Liao-“Experiment-validation-of-an-observer-based-ball-re-positioning-scheme-for-an-auto-balancer-system-of-DVD-ROMs-”-in-proc-of-The-25th-IASTED-international-conference-on-modeling-identification-and-control-Feb-2006-Spain-EI-Publication-56663598" target="_blank">

 Paul C.-P. Chao* and Chi-Wei Chiu, “ Paul C.-P. Chao* and Pen-Yen Liao, “Experiment validation of an observer-based ball re-positioning scheme for an auto-balancer system of DVD-ROMs,” in proc. of The 25th IASTED international conference on modeling, identification and control, Feb, 2006, Spain. (EI Publication)

, Feb. 2009
2009 Paul C.-P. Chao, Lun-De Liao and Chi-Wei Chiu, 2006, “Design of a Novel LED Lens Cap and Optimization of LED Placement in a Large Area Direct Backlight for LCD-TVs,” in porc. of SPIE Europe conference Photonics in Multimedia, 3-7, April, 2006, Strasbourg, France, Proc. of SPIE, v 6196, Photonics in Multimedia, 2006, pp. 61960N. (EI Publication)

, Feb. 2009" href="/en/research/Conference_Papers/Paul-C-P-Chao-Lun-De-Liao-and-Chi-Wei-Chiu-2006-“Design-of-a-Novel-LED-Lens-Cap-and-Optimization-of-LED-Placement-in-a-Large-Area-Direct-Backlight-for-LCD-TVs-”-in-porc-of-SPIE-Europe-conference-Photonics-in-Multimedia-3-7-April-2006-Strasbourg-France-Proc-of-SPIE-v-6196-Photonics-in-Multimedia-2006-pp-61960N-EI-Publication-27200770" target="_blank">

Paul C.-P. Chao, Lun-De Liao and Chi-Wei Chiu, 2006, “Design of a Novel LED Lens Cap and Optimization of LED Placement in a Large Area Direct Backlight for LCD-TVs,” in porc. of SPIE Europe conference Photonics in Multimedia, 3-7, April, 2006, Strasbourg, France, Proc. of SPIE, v 6196, Photonics in Multimedia, 2006, pp. 61960N. (EI Publication)

, Feb. 2009
2009 Lun-De Liao, Paul C.-P. Chao and Chi-Wei Chiu, 2006, “Design of a Novel LED Lens Cap and Optimization of LED Placement in a Large Area Direct Backlight for LCD-TVs,” in porc. of Taiwan Optics Conference, 9-10, Dec, 2006, Tainan, Taiwan.

, Feb. 2009" href="/en/research/Conference_Papers/Lun-De-Liao-Paul-C-P-Chao-and-Chi-Wei-Chiu-2006-“Design-of-a-Novel-LED-Lens-Cap-and-Optimization-of-LED-Placement-in-a-Large-Area-Direct-Backlight-for-LCD-TVs-”-in-porc-of-Taiwan-Optics-Conference-9-10-Dec-2006-Tainan-Taiwan-70563099" target="_blank">

Lun-De Liao, Paul C.-P. Chao and Chi-Wei Chiu, 2006, “Design of a Novel LED Lens Cap and Optimization of LED Placement in a Large Area Direct Backlight for LCD-TVs,” in porc. of Taiwan Optics Conference, 9-10, Dec, 2006, Tainan, Taiwan.

, Feb. 2009
2009 Paul C. P. Chao and I.-T. Wang, “Modeling and Experimental Validation of a Micro-speaker with Corrugated Diaphragm for Mobile Phones,” the 2006 ASME/JSME Joint Conference on Micromechatronics for Information and Precision Equipment (MIPE 2006) held on June 21-23, 2006, at the Santa Clara University in California. (EI Publication)

, Feb. 2009" href="/en/research/Conference_Papers/Paul-C-P-Chao-and-I-T-Wang-“Modeling-and-Experimental-Validation-of-a-Micro-speaker-with-Corrugated-Diaphragm-for-Mobile-Phones-”-the-2006-ASME-JSME-Joint-Conference-on-Micromechatronics-for-Information-and-Precision-Equipment-MIPE-2006-held-on-June-21-23-2006-at-the-Santa-Clara-University-in-California-EI-Publication-48585097" target="_blank">

Paul C. P. Chao and I.-T. Wang, “Modeling and Experimental Validation of a Micro-speaker with Corrugated Diaphragm for Mobile Phones,” the 2006 ASME/JSME Joint Conference on Micromechatronics for Information and Precision Equipment (MIPE 2006) held on June 21-23, 2006, at the Santa Clara University in California. (EI Publication)

, Feb. 2009
2009 Paul C.P. Chao*, Cheng-Kuo Sung and Szu-Tuo Wu, “Non-planar modeling and experimental validation of a spindle-disk system equipped with an automatic balancer system in optical disc drives,” the 2006 ASME/JSME Joint Conference on Micromechatronics for Information and Precision Equipment (MIPE 2006) held on June 21-23, 2006, at the Santa Clara University in California. (EI Publication), Feb. 2009" href="/en/research/Conference_Papers/Paul-C-P-Chao-Cheng-Kuo-Sung-and-Szu-Tuo-Wu-“Non-planar-modeling-and-experimental-validation-of-a-spindle-disk-system-equipped-with-an-automatic-balancer-system-in-optical-disc-drives-”-the-2006-ASME-JSME-Joint-Conference-on-Micromechatronics-for-Information-and-Precision-Equipment-MIPE-2006-held-on-June-21-23-2006-at-the-Santa-Clara-University-in-California-EI-Publication-68699157" target="_blank">Paul C.P. Chao*, Cheng-Kuo Sung and Szu-Tuo Wu, “Non-planar modeling and experimental validation of a spindle-disk system equipped with an automatic balancer system in optical disc drives,” the 2006 ASME/JSME Joint Conference on Micromechatronics for Information and Precision Equipment (MIPE 2006) held on June 21-23, 2006, at the Santa Clara University in California. (EI Publication), Feb. 2009
2009  Paul C.P. Chao and Chi-Wei Chiu, “Development of a precision inspection machine for assuring the dynamic quality of the pick-ups used in optical disc drives,” the 2006 ASME/JSME Joint Conference on Micromechatronics for Information and Precision Equipment (MIPE 2006) to be held on June 21-23, 2006, at the Santa Clara University in California. (EI Publication)

, Feb. 2009" href="/en/research/Conference_Papers/ Paul-C-P-Chao-and-Chi-Wei-Chiu-“Development-of-a-precision-inspection-machine-for-assuring-the-dynamic-quality-of-the-pick-ups-used-in-optical-disc-drives-”-the-2006-ASME-JSME-Joint-Conference-on-Micromechatronics-for-Information-and-Precision-Equipment-MIPE-2006-to-be-held-on-June-21-23-2006-at-the-Santa-Clara-University-in-California-EI-Publication-8045978" target="_blank">

 Paul C.P. Chao and Chi-Wei Chiu, “Development of a precision inspection machine for assuring the dynamic quality of the pick-ups used in optical disc drives,” the 2006 ASME/JSME Joint Conference on Micromechatronics for Information and Precision Equipment (MIPE 2006) to be held on June 21-23, 2006, at the Santa Clara University in California. (EI Publication)

, Feb. 2009
2009 Paul C.P. Chao and Chi-Wei Chiu, “A novel precision inspection machine for assuring the dynamic quality of the pick-ups used in optical disc drives,” International Symposium on Precision Mechanical Measurements (ISPMM), 2006, SPIE Proceedings. (EI Publication)

, Feb. 2009" href="/en/research/Conference_Papers/Paul-C-P-Chao-and-Chi-Wei-Chiu-“A-novel-precision-inspection-machine-for-assuring-the-dynamic-quality-of-the-pick-ups-used-in-optical-disc-drives-”-International-Symposium-on-Precision-Mechanical-Measurements-ISPMM-2006-SPIE-Proceedings-EI-Publication-66914674" target="_blank">

Paul C.P. Chao and Chi-Wei Chiu, “A novel precision inspection machine for assuring the dynamic quality of the pick-ups used in optical disc drives,” International Symposium on Precision Mechanical Measurements (ISPMM), 2006, SPIE Proceedings. (EI Publication)

, Feb. 2009
2009 Paul C.P. Chao and Ju-Ho Chen, 2006, “A novel microscopic inverse Preisach model embedded in finite elements used for precision positioning,” the 17th International Conference on Adaptive Structure Techniques, Taipei, Taiwan, R. O. C., Feb. 2009" href="/en/research/Conference_Papers/Paul-C-P-Chao-and-Ju-Ho-Chen-2006-“A-novel-microscopic-inverse-Preisach-model-embedded-in-finite-elements-used-for-precision-positioning-”-the-17th-International-Conference-on-Adaptive-Structure-Techniques-Taipei-Taiwan-R-O-C-4630847" target="_blank">Paul C.P. Chao and Ju-Ho Chen, 2006, “A novel microscopic inverse Preisach model embedded in finite elements used for precision positioning,” the 17th International Conference on Adaptive Structure Techniques, Taipei, Taiwan, R. O. C., Feb. 2009
2009 Chi-Wei Chiu and Paul C.-P. Chao, 2006, “A Novel Method to Predict the Pull-in Voltage in a Closed Form for Deformed Micro-plates Actuated by a Distributed Electrostatic Force,” The 30-th National Conference on Theoretical and Applied Mechanics, Dec., 2006, pp. 2136-2143, December 15-16, 2006, DYU, Changhwa, Taiwan, R.O.C.

, Feb. 2009" href="/en/research/Conference_Papers/Chi-Wei-Chiu-and-Paul-C-P-Chao-2006-“A-Novel-Method-to-Predict-the-Pull-in-Voltage-in-a-Closed-Form-for-Deformed-Micro-plates-Actuated-by-a-Distributed-Electrostatic-Force-”-The-30-th-National-Conference-on-Theoretical-and-Applied-Mechanics-Dec-2006-pp-2136-2143-December-15-16-2006-DYU-Changhwa-Taiwan-R-O-C-2064443" target="_blank">

Chi-Wei Chiu and Paul C.-P. Chao, 2006, “A Novel Method to Predict the Pull-in Voltage in a Closed Form for Deformed Micro-plates Actuated by a Distributed Electrostatic Force,” The 30-th National Conference on Theoretical and Applied Mechanics, Dec., 2006, pp. 2136-2143, December 15-16, 2006, DYU, Changhwa, Taiwan, R.O.C.

, Feb. 2009
2009 Paul C.P. Chao and Sung-Ching Wu, 2007, “Optimal Design of Magnetic Zooming Mechanism Used in Cameras of Mobile Phones via Genetic Algorithm,” The 10th Joint MMM/Intermag Conference in Baltimore, Maryland on January 7-11, 2007. (EI Publication)

, Feb. 2009" href="/en/research/Conference_Papers/Paul-C-P-Chao-and-Sung-Ching-Wu-2007-“Optimal-Design-of-Magnetic-Zooming-Mechanism-Used-in-Cameras-of-Mobile-Phones-via-Genetic-Algorithm-”-The-10th-Joint-MMM-Intermag-Conference-in-Baltimore-Maryland-on-January-7-11-2007-EI-Publication-44111339" target="_blank">

Paul C.P. Chao and Sung-Ching Wu, 2007, “Optimal Design of Magnetic Zooming Mechanism Used in Cameras of Mobile Phones via Genetic Algorithm,” The 10th Joint MMM/Intermag Conference in Baltimore, Maryland on January 7-11, 2007. (EI Publication)

, Feb. 2009
2009 Paul C.-P. Chao and Yuan Hsu-Pang, 2007, “Magneto-Electro-Dynamical Modeling and Design of a Micro-Speaker Used for Mobile Phones with Considerations of Diaphragm Corrugation and Air Closures,” The 10th Joint MMM/Intermag Conference, Baltimore, Maryland on January 7-11, 2007. (EI Publication)

, Feb. 2009" href="/en/research/Conference_Papers/Paul-C-P-Chao-and-Yuan-Hsu-Pang-2007-“Magneto-Electro-Dynamical-Modeling-and-Design-of-a-Micro-Speaker-Used-for-Mobile-Phones-with-Considerations-of-Diaphragm-Corrugation-and-Air-Closures-”-The-10th-Joint-MMM-Intermag-Conference-Baltimore-Maryland-on-January-7-11-2007-EI-Publication-68339619" target="_blank">

Paul C.-P. Chao and Yuan Hsu-Pang, 2007, “Magneto-Electro-Dynamical Modeling and Design of a Micro-Speaker Used for Mobile Phones with Considerations of Diaphragm Corrugation and Air Closures,” The 10th Joint MMM/Intermag Conference, Baltimore, Maryland on January 7-11, 2007. (EI Publication)

, Feb. 2009
2009 Chi-Wei Chiu, Paul C.-P. Chao, and Din-Yuan Wu, 2007, “Optimal Design of Magnetic Actuated Optical Image Stabilization Mechanism for Cameras in Mobile Phones via Genetic Algorithm,” The 10th Joint MMM/Intermag Conference to be held in Baltimore, Maryland on January 7-11, 2007. (EI Publication)

, Feb. 2009" href="/en/research/Conference_Papers/Chi-Wei-Chiu-Paul-C-P-Chao-and-Din-Yuan-Wu-2007-“Optimal-Design-of-Magnetic-Actuated-Optical-Image-Stabilization-Mechanism-for-Cameras-in-Mobile-Phones-via-Genetic-Algorithm-”-The-10th-Joint-MMM-Intermag-Conference-to-be-held-in-Baltimore-Maryland-on-January-7-11-2007-EI-Publication-91479212" target="_blank">

Chi-Wei Chiu, Paul C.-P. Chao, and Din-Yuan Wu, 2007, “Optimal Design of Magnetic Actuated Optical Image Stabilization Mechanism for Cameras in Mobile Phones via Genetic Algorithm,” The 10th Joint MMM/Intermag Conference to be held in Baltimore, Maryland on January 7-11, 2007. (EI Publication)

, Feb. 2009
2009 Paul C.-P. Chao, Lun-De Liao, Chi-Wei Chiu, 2007, “Electromagnetic Numerical Characterization of the Liquid Crystal Lens Using Finite-Difference Time Domain Method,” Asian Pacific Conference on Optics Manufacture, January, 2007, Hong Kong, China.

, Feb. 2009" href="/en/research/Conference_Papers/Paul-C-P-Chao-Lun-De-Liao-Chi-Wei-Chiu-2007-“Electromagnetic-Numerical-Characterization-of-the-Liquid-Crystal-Lens-Using-Finite-Difference-Time-Domain-Method-”-Asian-Pacific-Conference-on-Optics-Manufacture-January-2007-Hong-Kong-China-499605" target="_blank">

Paul C.-P. Chao, Lun-De Liao, Chi-Wei Chiu, 2007, “Electromagnetic Numerical Characterization of the Liquid Crystal Lens Using Finite-Difference Time Domain Method,” Asian Pacific Conference on Optics Manufacture, January, 2007, Hong Kong, China.

, Feb. 2009
2009 Chi-Wei Chiu, Chien-Yu Shen and Paul C.-P. Chao, Jan, 2007, “Novel Lens Design and Experimental Verification for High Efficiency Direct Type Backlight Module of LCD-TV,” Asian Pacific Conference on Optics Manufacture, January, 2007, Hong Kong, China., Feb. 2009" href="/en/research/Conference_Papers/Chi-Wei-Chiu-Chien-Yu-Shen-and-Paul-C-P-Chao-Jan-2007-“Novel-Lens-Design-and-Experimental-Verification-for-High-Efficiency-Direct-Type-Backlight-Module-of-LCD-TV-”-Asian-Pacific-Conference-on-Optics-Manufacture-January-2007-Hong-Kong-China-77272851" target="_blank">Chi-Wei Chiu, Chien-Yu Shen and Paul C.-P. Chao, Jan, 2007, “Novel Lens Design and Experimental Verification for High Efficiency Direct Type Backlight Module of LCD-TV,” Asian Pacific Conference on Optics Manufacture, January, 2007, Hong Kong, China., Feb. 2009
2009 Paul C.-P. Chao, Lun-De Liao, Chi-Wei Chiu, Jan, 2007, “Electromagnetic Numerical Characterization of the Liquid Crystal Lens Using Finite-Difference Time Domain Method,” Asian Pacific Conference on Optics Manufacture, January, 2007, Hong Kong, China.

 

, Feb. 2009" href="/en/research/Conference_Papers/Paul-C-P-Chao-Lun-De-Liao-Chi-Wei-Chiu-Jan-2007-“Electromagnetic-Numerical-Characterization-of-the-Liquid-Crystal-Lens-Using-Finite-Difference-Time-Domain-Method-”-Asian-Pacific-Conference-on-Optics-Manufacture-January-2007-Hong-Kong-China-  -74061858" target="_blank">Paul C.-P. Chao, Lun-De Liao, Chi-Wei Chiu, Jan, 2007, “Electromagnetic Numerical Characterization of the Liquid Crystal Lens Using Finite-Difference Time Domain Method,” Asian Pacific Conference on Optics Manufacture, January, 2007, Hong Kong, China.

 

, Feb. 2009
2009 Chi-Wei Chiu, Chien-Yu Shen and Paul C.-P. Chao, “Novel Lens Design and Experimental Verification for High Efficiency Direct Type Backlight Module of LCD-TV,” The 1st International Conference on Display for LEDs, Jan, 2007, Seoul, Korea., Feb. 2009" href="/en/research/Conference_Papers/Chi-Wei-Chiu-Chien-Yu-Shen-and-Paul-C-P-Chao-“Novel-Lens-Design-and-Experimental-Verification-for-High-Efficiency-Direct-Type-Backlight-Module-of-LCD-TV-”-The-1st-International-Conference-on-Display-for-LEDs-Jan-2007-Seoul-Korea-15967826" target="_blank">Chi-Wei Chiu, Chien-Yu Shen and Paul C.-P. Chao, “Novel Lens Design and Experimental Verification for High Efficiency Direct Type Backlight Module of LCD-TV,” The 1st International Conference on Display for LEDs, Jan, 2007, Seoul, Korea., Feb. 2009
2009  C.-W. Chiu, Paul C.-P. Chao and J.-Y. Shen, 2007, “Deign and Construction of an In-situ Inspection Machine for Ensuring the Dynamic Performance of Fluid Bearings in Data Storage Devices,” The 17th Annual ASME Conference on Information Storage and Processing Systems, held on June 18-19, 2007 at the Santa Clara University in California. (EI Publication)

, Feb. 2009" href="/en/research/Conference_Papers/ C-W-Chiu-Paul-C-P-Chao-and-J-Y-Shen-2007-“Deign-and-Construction-of-an-In-situ-Inspection-Machine-for-Ensuring-the-Dynamic-Performance-of-Fluid-Bearings-in-Data-Storage-Devices-”-The-17th-Annual-ASME-Conference-on-Information-Storage-and-Processing-Systems-held-on-June-18-19-2007-at-the-Santa-Clara-University-in-California-EI-Publication-99188105" target="_blank">

 C.-W. Chiu, Paul C.-P. Chao and J.-Y. Shen, 2007, “Deign and Construction of an In-situ Inspection Machine for Ensuring the Dynamic Performance of Fluid Bearings in Data Storage Devices,” The 17th Annual ASME Conference on Information Storage and Processing Systems, held on June 18-19, 2007 at the Santa Clara University in California. (EI Publication)

, Feb. 2009
2009 Paul C.-P. Chao J.-Y. Shen and J.-S. Huang, 2007, “Deign and Experimental Verification of a Controller with Auto-Tuned Parameters for Precision Positioning of a Three-axis Optical Pickup,” The 17th Annual ASME Conference on Information Storage and Processing Systems, held on June 18-19, 2007 at the Santa Clara University in California. (EI Publication)

, Feb. 2009" href="/en/research/Conference_Papers/Paul-C-P-Chao-J-Y-Shen-and-J-S-Huang-2007-“Deign-and-Experimental-Verification-of-a-Controller-with-Auto-Tuned-Parameters-for-Precision-Positioning-of-a-Three-axis-Optical-Pickup-”-The-17th-Annual-ASME-Conference-on-Information-Storage-and-Processing-Systems-held-on-June-18-19-2007-at-the-Santa-Clara-University-in-California-EI-Publication-87214654" target="_blank">

Paul C.-P. Chao J.-Y. Shen and J.-S. Huang, 2007, “Deign and Experimental Verification of a Controller with Auto-Tuned Parameters for Precision Positioning of a Three-axis Optical Pickup,” The 17th Annual ASME Conference on Information Storage and Processing Systems, held on June 18-19, 2007 at the Santa Clara University in California. (EI Publication)

, Feb. 2009
2009 Paul C.-P. Chao*, Lun-De Liao, Ming-Hsun Chung and Jeng-Sheng Hunag, 2007, “Precision Positioning and Experimental Verification of a Parallel Piezo-Beam Lens Holder for Fine Track-Following in a Dual-Stage Actuator for Data Storage Devices,” The 17th Annual ASME Conference on Information Storage and Processing Systems, held on June 18-19, 2007 at the Santa Clara University in California. (EI Publication)

, Feb. 2009" href="/en/research/Conference_Papers/Paul-C-P-Chao-Lun-De-Liao-Ming-Hsun-Chung-and-Jeng-Sheng-Hunag-2007-“Precision-Positioning-and-Experimental-Verification-of-a-Parallel-Piezo-Beam-Lens-Holder-for-Fine-Track-Following-in-a-Dual-Stage-Actuator-for-Data-Storage-Devices-”-The-17th-Annual-ASME-Conference-on-Information-Storage-and-Processing-Systems-held-on-June-18-19-2007-at-the-Santa-Clara-University-in-California-EI-Publication-18202014" target="_blank">

Paul C.-P. Chao*, Lun-De Liao, Ming-Hsun Chung and Jeng-Sheng Hunag, 2007, “Precision Positioning and Experimental Verification of a Parallel Piezo-Beam Lens Holder for Fine Track-Following in a Dual-Stage Actuator for Data Storage Devices,” The 17th Annual ASME Conference on Information Storage and Processing Systems, held on June 18-19, 2007 at the Santa Clara University in California. (EI Publication)

, Feb. 2009
2009 C. C. Wang, C. K. Sung and Paul C.-P. Chao, “Dynamic Analysis on a Hula Hoop Functioning as a Motion Transformer,” 12th IFToMM World Congress, Besançon (France), June18-21, 2007. (EI Publication)

, Feb. 2009" href="/en/research/Conference_Papers/C-C-Wang-C-K-Sung-and-Paul-C-P-Chao-“Dynamic-Analysis-on-a-Hula-Hoop-Functioning-as-a-Motion-Transformer-”-12th-IFToMM-World-Congress-Besançon-France-June18-21-2007-EI-Publication-29862460" target="_blank">

C. C. Wang, C. K. Sung and Paul C.-P. Chao, “Dynamic Analysis on a Hula Hoop Functioning as a Motion Transformer,” 12th IFToMM World Congress, Besançon (France), June18-21, 2007. (EI Publication)

, Feb. 2009
2009 Cheng-Kuo Sung and Paul C.-P. Chao, “Impulsive responses of a hula hoop,” The Fourteenth International Congress on Sound and Vibration (ICSV14), July 9-12, 2007, Cairns, Australia.

, Feb. 2009" href="/en/research/Conference_Papers/Cheng-Kuo-Sung-and-Paul-C-P-Chao-“Impulsive-responses-of-a-hula-hoop-”-The-Fourteenth-International-Congress-on-Sound-and-Vibration-ICSV14-July-9-12-2007-Cairns-Australia-72726438" target="_blank">

Cheng-Kuo Sung and Paul C.-P. Chao, “Impulsive responses of a hula hoop,” The Fourteenth International Congress on Sound and Vibration (ICSV14), July 9-12, 2007, Cairns, Australia.

, Feb. 2009
2009 Yi-Ling Yang, Paul C.-P. Chao, Cheng-Kuo Sung, “Landing Posture Control of a Generalized Twin-body System via Methods of Input-output Linearization and Computed Torque,” ASME 2007 International Design Engineering Technical Conference, Sep. 4-7, 2007, Las Vegas, Nevada, USA. (EI Publication)

, Feb. 2009" href="/en/research/Conference_Papers/Yi-Ling-Yang-Paul-C-P-Chao-Cheng-Kuo-Sung-“Landing-Posture-Control-of-a-Generalized-Twin-body-System-via-Methods-of-Input-output-Linearization-and-Computed-Torque-”-ASME-2007-International-Design-Engineering-Technical-Conference-Sep-4-7-2007-Las-Vegas-Nevada-USA-EI-Publication-21770734" target="_blank">

Yi-Ling Yang, Paul C.-P. Chao, Cheng-Kuo Sung, “Landing Posture Control of a Generalized Twin-body System via Methods of Input-output Linearization and Computed Torque,” ASME 2007 International Design Engineering Technical Conference, Sep. 4-7, 2007, Las Vegas, Nevada, USA. (EI Publication)

, Feb. 2009
2009  Lun-De. Liao, Paul C.-P. Chao and Chi-Wei. Chiu, “Optimal Design of the Photonic Crystal Fiber by means of the Genetic Algorithm and Three-Dimensional Finite-Difference Time-Domain Methods ,” The 14h International Display Workshops, December 5-7, 2007, Sapporo Convention Center, Sapporo, Japan.

, Feb. 2009" href="/en/research/Conference_Papers/ Lun-De-Liao-Paul-C-P-Chao-and-Chi-Wei-Chiu-“Optimal-Design-of-the-Photonic-Crystal-Fiber-by-means-of-the-Genetic-Algorithm-and-Three-Dimensional-Finite-Difference-Time-Domain-Methods-”-The-14h-International-Display-Workshops-December-5-7-2007-Sapporo-Convention-Center-Sapporo-Japan-48629239" target="_blank">

 Lun-De. Liao, Paul C.-P. Chao and Chi-Wei. Chiu, “Optimal Design of the Photonic Crystal Fiber by means of the Genetic Algorithm and Three-Dimensional Finite-Difference Time-Domain Methods ,” The 14h International Display Workshops, December 5-7, 2007, Sapporo Convention Center, Sapporo, Japan.

, Feb. 2009
2009 Paul C.-P. Chao, Rong-Jhe Chen, Lun-De Liao, Chi-Wei Chiu, “A Novel Design of Micro-Lens Array on Liquid Crystal Displays for the Backlight Efficiency Enhancement,” The 14h International Display Workshops, December 5-7, 2007, Sapporo Convention Center, Sapporo, Japan.

, Feb. 2009" href="/en/research/Conference_Papers/Paul-C-P-Chao-Rong-Jhe-Chen-Lun-De-Liao-Chi-Wei-Chiu-“A-Novel-Design-of-Micro-Lens-Array-on-Liquid-Crystal-Displays-for-the-Backlight-Efficiency-Enhancement-”-The-14h-International-Display-Workshops-December-5-7-2007-Sapporo-Convention-Center-Sapporo-Japan-90607739" target="_blank">

Paul C.-P. Chao, Rong-Jhe Chen, Lun-De Liao, Chi-Wei Chiu, “A Novel Design of Micro-Lens Array on Liquid Crystal Displays for the Backlight Efficiency Enhancement,” The 14h International Display Workshops, December 5-7, 2007, Sapporo Convention Center, Sapporo, Japan.

, Feb. 2009
2009 C.-Y. Shen, C.-W. Chiu, C.-P. Chao, J.-S. Huang, H.-W. Lin, “Novel Lens Design for Ultra-Thin, High Efficiency of Light Utilization, Direct Type RGB LED Backlight Module,” The 14h International Display Workshops, December 5-7, 2007, Sapporo Convention Center, Sapporo, Japan.

, Feb. 2009" href="/en/research/Conference_Papers/C-Y-Shen-C-W-Chiu-C-P-Chao-J-S-Huang-H-W-Lin-“Novel-Lens-Design-for-Ultra-Thin-High-Efficiency-of-Light-Utilization-Direct-Type-RGB-LED-Backlight-Module-”-The-14h-International-Display-Workshops-December-5-7-2007-Sapporo-Convention-Center-Sapporo-Japan-45049472" target="_blank">

C.-Y. Shen, C.-W. Chiu, C.-P. Chao, J.-S. Huang, H.-W. Lin, “Novel Lens Design for Ultra-Thin, High Efficiency of Light Utilization, Direct Type RGB LED Backlight Module,” The 14h International Display Workshops, December 5-7, 2007, Sapporo Convention Center, Sapporo, Japan.

, Feb. 2009
2009 Paul C.-P. Chao, Chi-Wei Chiu and He-Kai Liang, 2007, “Design and Actuation Strategy of a Magnetically-Actuated Auto-Focusing Module for Mobile Phones,” The 52th Magnetism and Magnetic Materials conference to be held in Tempa, Florida on November 5-9, 2007. (EI Publication)

, Feb. 2009" href="/en/research/Conference_Papers/Paul-C-P-Chao-Chi-Wei-Chiu-and-He-Kai-Liang-2007-“Design-and-Actuation-Strategy-of-a-Magnetically-Actuated-Auto-Focusing-Module-for-Mobile-Phones-”-The-52th-Magnetism-and-Magnetic-Materials-conference-to-be-held-in-Tempa-Florida-on-November-5-9-2007-EI-Publication-92565602" target="_blank">

Paul C.-P. Chao, Chi-Wei Chiu and He-Kai Liang, 2007, “Design and Actuation Strategy of a Magnetically-Actuated Auto-Focusing Module for Mobile Phones,” The 52th Magnetism and Magnetic Materials conference to be held in Tempa, Florida on November 5-9, 2007. (EI Publication)

, Feb. 2009
2009 Chi-Wei Chiu, Paul C.-P. Chao and Fu-Kuan Young, 2007 “Optimal Design and Experimental Verification of Magnetic Actuated Optical Image Stabilization System for Camera Phone,” The 10th Joint MMM/Intermag Conference to be held in Tempa, Florida on November 5-9, 2007. (EI Publication)

, Feb. 2009" href="/en/research/Conference_Papers/Chi-Wei-Chiu-Paul-C-P-Chao-and-Fu-Kuan-Young-2007-“Optimal-Design-and-Experimental-Verification-of-Magnetic-Actuated-Optical-Image-Stabilization-System-for-Camera-Phone-”-The-10th-Joint-MMM-Intermag-Conference-to-be-held-in-Tempa-Florida-on-November-5-9-2007-EI-Publication-91508132" target="_blank">

Chi-Wei Chiu, Paul C.-P. Chao and Fu-Kuan Young, 2007 “Optimal Design and Experimental Verification of Magnetic Actuated Optical Image Stabilization System for Camera Phone,” The 10th Joint MMM/Intermag Conference to be held in Tempa, Florida on November 5-9, 2007. (EI Publication)

, Feb. 2009
2009 Yi-Ling Yang, Paul C.-P. Chao, Cheng-Kuo Sung, 2007, “Landing Posture Control of a Generalized 5-RDOF Twin-body System via Methods of Input-output Linearization and PD Control,” The 46th IEEE Conference on Decision and Control, Dec 12-14, New Orlean, LA, USA, pp. 1681-1686.  (EI Publication) , Feb. 2009" href="/en/research/Conference_Papers/Yi-Ling-Yang-Paul-C-P-Chao-Cheng-Kuo-Sung-2007-“Landing-Posture-Control-of-a-Generalized-5-RDOF-Twin-body-System-via-Methods-of-Input-output-Linearization-and-PD-Control-”-The-46th-IEEE-Conference-on-Decision-and-Control-Dec-12-14-New-Orlean-LA-USA-pp-1681-1686- -EI-Publication-59225272" target="_blank">Yi-Ling Yang, Paul C.-P. Chao, Cheng-Kuo Sung, 2007, “Landing Posture Control of a Generalized 5-RDOF Twin-body System via Methods of Input-output Linearization and PD Control,” The 46th IEEE Conference on Decision and Control, Dec 12-14, New Orlean, LA, USA, pp. 1681-1686.  (EI Publication) , Feb. 2009
2009 Paul C.- P. Chao, C.- W. Chiu, Tsu-Hsien Liu, “Pull-in Predictions for a Electrostatically Actuated Micro-Beam Based on a Continuous Model and Bifurcation Analysis,” The 31st National Conference on Theoretical and Applied Mechanics, December 21-22, 2007, ISU, Kaohsiung, Taiwan, R.O.C.

, Feb. 2009" href="/en/research/Conference_Papers/Paul-C-P-Chao-C-W-Chiu-Tsu-Hsien-Liu-“Pull-in-Predictions-for-a-Electrostatically-Actuated-Micro-Beam-Based-on-a-Continuous-Model-and-Bifurcation-Analysis-”-The-31st-National-Conference-on-Theoretical-and-Applied-Mechanics-December-21-22-2007-ISU-Kaohsiung-Taiwan-R-O-C-76736975" target="_blank">

Paul C.- P. Chao, C.- W. Chiu, Tsu-Hsien Liu, “Pull-in Predictions for a Electrostatically Actuated Micro-Beam Based on a Continuous Model and Bifurcation Analysis,” The 31st National Conference on Theoretical and Applied Mechanics, December 21-22, 2007, ISU, Kaohsiung, Taiwan, R.O.C.

, Feb. 2009
2009 Bo-Hong Lu, Yi-Chang Huang, Yu-Jhu Lin1, Paul C.-P. Chao, Shaou-Gang Miaou, Ming Chang and Jeng-Sheng Huang, “Image Servo Control for Three-dimensional Nano-machining System,” The 2007 CACS International Automatic Control Conference, National Chung Hsing University, Taichung, Taiwan, Nov. 9-11, 2007., Feb. 2009" href="/en/research/Conference_Papers/Bo-Hong-Lu-Yi-Chang-Huang-Yu-Jhu-Lin1-Paul-C-P-Chao-Shaou-Gang-Miaou-Ming-Chang-and-Jeng-Sheng-Huang-“Image-Servo-Control-for-Three-dimensional-Nano-machining-System-”-The-2007-CACS-International-Automatic-Control-Conference-National-Chung-Hsing-University-Taichung-Taiwan-Nov-9-11-2007-98232705" target="_blank">Bo-Hong Lu, Yi-Chang Huang, Yu-Jhu Lin1, Paul C.-P. Chao, Shaou-Gang Miaou, Ming Chang and Jeng-Sheng Huang, “Image Servo Control for Three-dimensional Nano-machining System,” The 2007 CACS International Automatic Control Conference, National Chung Hsing University, Taichung, Taiwan, Nov. 9-11, 2007., Feb. 2009
2009 H.-K. Liang , Paul C.-P. Chao and Jeng-Sheng Huang, “A Study of Fast Auto-focusing Method using GA-based Neural Network,” Proceedings of the 2007 Congress of Chinese Society of Mechanical Engineering, Chungli, Taiwan, Nov. 23-24, 2007., Feb. 2009" href="/en/research/Conference_Papers/H-K-Liang-Paul-C-P-Chao-and-Jeng-Sheng-Huang-“A-Study-of-Fast-Auto-focusing-Method-using-GA-based-Neural-Network-”-Proceedings-of-the-2007-Congress-of-Chinese-Society-of-Mechanical-Engineering-Chungli-Taiwan-Nov-23-24-2007-98073106" target="_blank">H.-K. Liang , Paul C.-P. Chao and Jeng-Sheng Huang, “A Study of Fast Auto-focusing Method using GA-based Neural Network,” Proceedings of the 2007 Congress of Chinese Society of Mechanical Engineering, Chungli, Taiwan, Nov. 23-24, 2007., Feb. 2009
2009 Yu-Zheng Lin, Chi-Wei Chiu and Paul C.-P. Chao, “Tunable Focus Length Liquid Crystal Lens with Multi-ring Type Electrode Pattern,” OPT2007, Taipei, Taiwan.

, Feb. 2009" href="/en/research/Conference_Papers/Yu-Zheng-Lin-Chi-Wei-Chiu-and-Paul-C-P-Chao-“Tunable-Focus-Length-Liquid-Crystal-Lens-with-Multi-ring-Type-Electrode-Pattern-”-OPT2007-Taipei-Taiwan-7260333" target="_blank">

Yu-Zheng Lin, Chi-Wei Chiu and Paul C.-P. Chao, “Tunable Focus Length Liquid Crystal Lens with Multi-ring Type Electrode Pattern,” OPT2007, Taipei, Taiwan.

, Feb. 2009
2009 Paul C.-P. Chao, Wei-Dar Chen, and Chi-Wei Chiu, “Design, Fabrication and Experimental Validation of a Miniaturized Rotary Generator with Planar Coils and Optimization via Genetic Algorithm,” The Intermag Conference held in Madrid, Spain, on May 4-8, 2008. (EI Publication), Feb. 2009" href="/en/research/Conference_Papers/Paul-C-P-Chao-Wei-Dar-Chen-and-Chi-Wei-Chiu-“Design-Fabrication-and-Experimental-Validation-of-a-Miniaturized-Rotary-Generator-with-Planar-Coils-and-Optimization-via-Genetic-Algorithm-”-The-Intermag-Conference-held-in-Madrid-Spain-on-May-4-8-2008-EI-Publication-89764067" target="_blank">Paul C.-P. Chao, Wei-Dar Chen, and Chi-Wei Chiu, “Design, Fabrication and Experimental Validation of a Miniaturized Rotary Generator with Planar Coils and Optimization via Genetic Algorithm,” The Intermag Conference held in Madrid, Spain, on May 4-8, 2008. (EI Publication), Feb. 2009
2009 Paul C.-P. Chao, C.-Y. Shen, C.-W. Chiu, J.-S. Huang, C.-L. Wang, Solomon Chi, H.-W. Lin and S.- Y. Tsai, “Achieving Color Balance of a Large Sized BLU Directly–Lit by LEDs capped with Customized Optical Lenses,” The SID2008 Conference, Los Angles, USA. May 20-23, 2008, SID 08 Digest, pp. 870-873., Feb. 2009" href="/en/research/Conference_Papers/Paul-C-P-Chao-C-Y-Shen-C-W-Chiu-J-S-Huang-C-L-Wang-Solomon-Chi-H-W-Lin-and-S-Y-Tsai-“Achieving-Color-Balance-of-a-Large-Sized-BLU-Directly–Lit-by-LEDs-capped-with-Customized-Optical-Lenses-”-The-SID2008-Conference-Los-Angles-USA-May-20-23-2008-SID-08-Digest-pp-870-873-47895361" target="_blank">Paul C.-P. Chao, C.-Y. Shen, C.-W. Chiu, J.-S. Huang, C.-L. Wang, Solomon Chi, H.-W. Lin and S.- Y. Tsai, “Achieving Color Balance of a Large Sized BLU Directly–Lit by LEDs capped with Customized Optical Lenses,” The SID2008 Conference, Los Angles, USA. May 20-23, 2008, SID 08 Digest, pp. 870-873., Feb. 2009
2009 Paul C.-P. Chao J.-Y. Shen and J.-S. Huang, 2008, “Precision Positioning of a Three-axis Optical Pickup via a Double Phase-Lead Compensator Equipped with Auto-tuned Parameters,” The 17th Annual ASME Conference on Information Storage and Processing Systems, held on June 16-17, 2007 at the Santa Clara University in California. (EI Publication)

, Feb. 2009" href="/en/research/Conference_Papers/Paul-C-P-Chao-J-Y-Shen-and-J-S-Huang-2008-“Precision-Positioning-of-a-Three-axis-Optical-Pickup-via-a-Double-Phase-Lead-Compensator-Equipped-with-Auto-tuned-Parameters-”-The-17th-Annual-ASME-Conference-on-Information-Storage-and-Processing-Systems-held-on-June-16-17-2007-at-the-Santa-Clara-University-in-California-EI-Publication-85184108" target="_blank">

Paul C.-P. Chao J.-Y. Shen and J.-S. Huang, 2008, “Precision Positioning of a Three-axis Optical Pickup via a Double Phase-Lead Compensator Equipped with Auto-tuned Parameters,” The 17th Annual ASME Conference on Information Storage and Processing Systems, held on June 16-17, 2007 at the Santa Clara University in California. (EI Publication)

, Feb. 2009
2009 Paul C.-P. Chao*, Lun-De Liao, Ming-Hsun Chung and Jeng-Sheng Hunag, 2008, “Robus Dual-stage and Repetitive Control Designs for an Optical Pickup with Parallel Cantilever Beams Powered by Piezo-Actuators,” The 17th Annual ASME Conference on Information Storage and Processing Systems, held on June 16-17, 2008 at the Santa Clara University in California. (EI Publication)

, Feb. 2009" href="/en/research/Conference_Papers/Paul-C-P-Chao-Lun-De-Liao-Ming-Hsun-Chung-and-Jeng-Sheng-Hunag-2008-“Robus-Dual-stage-and-Repetitive-Control-Designs-for-an-Optical-Pickup-with-Parallel-Cantilever-Beams-Powered-by-Piezo-Actuators-”-The-17th-Annual-ASME-Conference-on-Information-Storage-and-Processing-Systems-held-on-June-16-17-2008-at-the-Santa-Clara-University-in-California-EI-Publication-62760429" target="_blank">

Paul C.-P. Chao*, Lun-De Liao, Ming-Hsun Chung and Jeng-Sheng Hunag, 2008, “Robus Dual-stage and Repetitive Control Designs for an Optical Pickup with Parallel Cantilever Beams Powered by Piezo-Actuators,” The 17th Annual ASME Conference on Information Storage and Processing Systems, held on June 16-17, 2008 at the Santa Clara University in California. (EI Publication)

, Feb. 2009
Year Book Title
2013 Chang-Po Chao, August, 1993, “Modeling a Radio Control Scale Helicopter for Robust Control Design,” Master Thesis, Michigan State University., Nov. 2013" href="/en/research/Book/Chang-Po-Chao-August-1993-“Modeling-a-Radio-Control-Scale-Helicopter-for-Robust-Control-Design-”-Master-Thesis-Michigan-State-University-41201419" target="_blank">Chang-Po Chao, August, 1993, “Modeling a Radio Control Scale Helicopter for Robust Control Design,” Master Thesis, Michigan State University., Nov. 2013
2013 Chang-Po Chao, June, 1997, “On the Nonlinear Dynamics of a rotating system attached with multiple centrifugal pendulum vibration absorbers,” Ph.D. Dissertation, Michigan State University. , Nov. 2013" href="/en/research/Book/Chang-Po-Chao-June-1997-“On-the-Nonlinear-Dynamics-of-a-rotating-system-attached-with-multiple-centrifugal-pendulum-vibration-absorbers-”-Ph-D-Dissertation-Michigan-State-University-25928360" target="_blank">Chang-Po Chao, June, 1997, “On the Nonlinear Dynamics of a rotating system attached with multiple centrifugal pendulum vibration absorbers,” Ph.D. Dissertation, Michigan State University. , Nov. 2013
2009 2. Y. Kang and Chang-Po Chao, “An Integration Method for Response Observation of Nonlinear Mechanical Systems Subjected to Double Excitations,” in the book of Applicable Mathematics: Its Perspectives and Challenges, Editor J. C. Misra, Narosa Publishing House, 2001, pp. 163-170.

, Feb. 2009" href="/en/research/Book/2-Y-Kang-and-Chang-Po-Chao-“An-Integration-Method-for-Response-Observation-of-Nonlinear-Mechanical-Systems-Subjected-to-Double-Excitations-”-in-the-book-of-Applicable-Mathematics-Its-Perspectives-and-Challenges-Editor-J-C-Misra-Narosa-Publishing-House-2001-pp-163-170-81152322" target="_blank">

2. Y. Kang and Chang-Po Chao, “An Integration Method for Response Observation of Nonlinear Mechanical Systems Subjected to Double Excitations,” in the book of Applicable Mathematics: Its Perspectives and Challenges, Editor J. C. Misra, Narosa Publishing House, 2001, pp. 163-170.

, Feb. 2009
2009 Feb. 2009
Project Category Year Period
Industrial Collaboration 2011 2011.01 ~ 2011.12
Industrial Collaboration 2011 2011.01 ~ 2011.12
Research Projects 2010 2010.08 ~ 2011.07
Research Projects 2010 2009.08 ~ 2012.08
Research Projects 2010 2009.08 ~ 2011.07
Publish Date Patent Title
2009/02/03
2009/02/03
2009/02/03
2009/02/03
2009/02/03
2009/02/03
2009/02/03
Year Research Title Publish Date Authors
2009 2009-02-03
2009 2009-02-03
2009 2009-02-03
2009 2009-02-03
2009 2009-02-03
2009 2009-02-03
2009 2009-02-03
2009 2009-02-03
2009 2009-02-03
2009 2009-02-03
2009 2009-02-03
2009 2009-02-03
2009 2009-02-03
2009 2009-02-03
2009 2009-02-03
2009 2009-02-03
2009 2009-02-03
2009 2009-02-03
2009 2009-02-03
2009 2009-02-03
2009 2009-02-03
2009 2009-02-03
2009 2009-02-03
2009 2009-02-03
2009 2009-02-03
2009 2009-02-03
2009 2009-02-03
2009 2009-02-03
2009 2009-02-03
2009

Steven W. Shaw and Chang-Po Chao, March, 20, 1996, “Estimation of the Required Absorber Inertia for Use on I3 Diesel Engine,” submitted to Ford Motor Company in Dearborn.

 2009-02-03
Country School Name Department Degree
U. S. A. Michigan State University Mechanical Engineering Ph. D.
Organization Title Department Job Title Duration
2011.01 ~ Up to today
2010.01 ~ Up to today
National Chiao Tung University Department of Electrical and Control Engineering Associate Professor 2008.08 ~ Up to today
National Chiao Tung University The Center for Continuing Education and Training Director 2007.08 ~ 2009.12
Ford Motor Company, Taiwan Product Development Product Development Engineer 1999.08 ~ 2000.07
Chrysler Corporation, Auburn Hill, MI, USA Powertrain Department of Chrysler Corporation CAE engineer 1997.08 ~ 1999.07
Honor Category Year Award Name
External Honor 2013
External Honor 2010
External Honor 2009
External Honor 2009
External Honor 2009
External Honor 2008
External Honor 2007
External Honor 2007
External Honor 2007 2007 SPIE proceedings, June 2007 – The published SPIE Journal paper is listed in one of Top Notch Researches, which is “Design of a Novel LED Lens Cap and Optimization of LED Placement in a Large Area Direct Backlight for LCD-TVs.”
External Honor 2007
External Honor 2006
External Honor 2006 2006 Merited as one of most cited authors for Journal of Sound and Vibration. (A Formal Congratulation Letter)
External Honor 2005
External Honor 2005
External Honor 2005
External Honor 2005
External Honor 2005
External Honor 2004
External Honor 2004
External Honor 2004
External Honor 2004
External Honor 2004
External Honor 2004
External Honor 2004
External Honor 2004
External Honor 2003
External Honor 2002
External Honor 2000
External Honor 1999 The paper “Attenuation of Engine Torsional Vibration Using Tuned Absorbers” received 1999 Arch T. Colwell Merit Best Paper Award from Society of Automotive Engineering (SAE) as contributions to mobility engineering. (This paper is 1 of 20 sele
External Honor 1994
External Honor 1911 Invited papers by ISA transactions (SCI Journal) and a Special session in Journals of System Sciences (SCI Journal).
Year Month Writing Title Other Reference URL
2007 0 趙昌博，“次世代光碟機關鍵技術研究--子計畫四：具參數自動調變功能之智慧型光學讀寫頭伺服系統研究與實現(3/3)”，行政院國家科學委員會補助專題研究計畫結案報告，NSC 96-2212-E-033-010。 Tech. Report
2007 0 趙昌博，“微奈米系統特性分析、設計製造與光電檢測技術之建置與研究-子計畫三:具即時即時監測功能之奈微米光機電檢測及操作系統關鍵技術研究(3/3)”， 行政院國家科學委員會補助專題研究計畫結案報告，NSC 96-2212-E-033-001。 Tech. Report
2006 0 趙昌博，“LCD背光模組之LED光源結構設計與系統最佳化”，友達結案報告。 Tech. Report
2006 0 趙昌博，“次世代光碟機關鍵技術研究--子計畫四：具參數自動調變功能之智慧型光學讀寫頭伺服系統研究與實現(2/3)”，行政院國家科學委員會補助專題研究計畫結案報告，NSC 95-2212-E-033-010。 Tech. Report
2006 0 趙昌博，“微奈米系統特性分析、設計製造與光電檢測技術之建置與研究-子計畫三:具即時即時監測功能之奈微米光機電檢測及操作系統關鍵技術研究(2/3)”， 行政院國家科學委員會補助專題研究計畫結案報告，NSC 95-2212-E-033-001。 Tech. Report
2005 0 趙昌博，“次世代光碟機關鍵技術研究--子計畫四：具參數自動調變功能之智慧型光學讀寫頭伺服系統研究與實現(1/3)”，行政院國家科學委員會補助專題研究計畫結案報告，NSC 94-2212-E-033-010。 Tech. Report
2005 0 趙昌博，“微奈米系統特性分析、設計製造與光電檢測技術之建置與研究-子計畫三:具即時即時監測功能之奈微米光機電檢測及操作系統關鍵技術研究(1/3)”， 行政院國家科學委員會補助專題研究計畫結案報告，NSC 94-2212-E-033-001。 Tech. Report
2005 0 趙昌博，“微揚聲器之機磁電動態建模、實驗驗證與優化”，行政院國家科學委員會補助專題研究計畫結案報告，NSC 94-2622-E-033-001-CC3。 Tech. Report
2004 0 趙昌博，“咖啡機噪音分析與進給機構設計”，UCHI結案報告。 Tech. Report
2004 0 趙昌博，“LED光源微結構及其最佳化設計-直下式LED背光模組之解決方案”， 友達影像顯示專題競賽獎計畫結案報告。 Tech. Report
2004 0 趙昌博，“子計畫二：創新半主動式自動平衡裝置之設計分析與驗證 (3/3)”， 行政院國家科學委員會補助專題研究計畫結案報告，NSC 93-2212-E-033-001。 Tech. Report
2003 0 趙昌博，“光學讀寫頭自動調變控制器”，工研院機械所結案報告。 Tech. Report
2003 0 趙昌博，“微型麥克風設計與製作”， 經濟部工業局結案報告。 Tech. Report
2003 0 趙昌博，“微型麥克風設計與製作”， 經濟部工業局結案報告。 Tech. Report
2003 0 趙昌博，“微揚聲器之薄膜振動與音場分析”，行政院國家科學委員會補助專題研究計畫進度報告，NSC 92-2622-E-033-014。 Tech. Report
2003 0 趙昌博，“微揚聲器之薄膜振動與音場分析”，行政院國家科學委員會補助專題研究計畫進度報告，NSC 92-2622-E-033-014。 Tech. Report
2003 0 趙昌博，“子計畫二：創新半主動式自動平衡裝置之設計分析與驗證 (2/3)”， 行政院國家科學委員會補助專題研究計畫進度報告，NSC 92-2212-E-033-001。 Tech. Report
2003 0 趙昌博，“微揚聲器之薄膜振動與音場分析”，侯門行結案報告。 Tech. Report
2002 0 趙昌博，“微小發電機應用系統研究”，工研院機械所結案報告。 Tech. Report
2002 0 趙昌博，“超高解析度致動器之控制系統設計”，工研院光電所結案報告。 Tech. Report
2002 0 趙昌博，“薄殼電子產品撞擊之模擬與分析”， 行政院國家科學委員會補助專題研究計畫成果報告，NSC 91-2622-E-033-014。 Tech. Report
2002 0 趙昌博，“子計畫二：創新半主動式自動平衡裝置之設計分析與驗證 (1/3)”， 行政院國家科學委員會補助專題研究計畫進度報告，NSC 91-2212-E-033-004。 Tech. Report
2001 0 趙昌博，“顯微干涉技術”，工研院量測中心結案報告。 Tech. Report
2001 0 趙昌博，“二維影像處理技術應用在精密齒型量測上之研究”，中科院結案報告。 Tech. Report
2001 0 趙昌博，“光碟機主動式減振裝置”，工研院光電所結案報告。 Tech. Report
2001 0 趙昌博，“六軸工具機伺服控制系統開發”， 行政院國家科學委員會補助專題研究計畫成果報告，NSC 90-2212-E033-010。 Tech. Report
2000 0 趙昌博，“高速軌道車輛系統轉向架設計與系統鑑別”， 行政院國家科學委員會補助專題研究計畫成果報告，NSC89-2218-E-033-024。 Tech. Report
2000 0 趙昌博，“軌道車輛的動力分析及電腦模擬系統之建立”， 行政院國家科學委員會補助專題研究計畫成果報告，NSC89-2212-E-161-003。 Tech. Report
2000 0 趙昌博，“光碟機主動式減振裝置”，經濟部科技研究發展專案計畫成果報告。 Tech. Report
1996 3 Steven W. Shaw and Chang-Po Chao, March, 20, 1996, “Estimation of the Required Absorber Inertia for Use on I3 Diesel Engine,” submitted to Ford Motor Company in Dearborn. Tech. Report